Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR2 Plate A - ENGINE: CYLINDER BLOCK AND HEAD
<< Return to Triumph Catalogue Plate ListPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
A1AA | 501418 |
ENGINE UINT (Less Water Pump, Distributor, Dy- namo, Petrol Pump, Oil Filter, Thermo stat, Exhaust Manifold, Carburettor and Sparking Plugs)Triumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A1AB | 503708 |
ENGINE UNIT (Less Water Pump, Distributor, Dy- namo, Petrol Pump, Oil Filter, Thermo stat, Exhaust Manifold, Carburettor and Sparking Plugs)Triumph Catalogue Remarks: From Engine No. 13052E |
1 | |||
A1AC | 503706 |
ENGINE UINT (Less Water Pump, Distributor, Dy- namo, Petrol Pump, Oil Filter, Thermo stat, Exhaust Manifold, Carburettor and Sparking Plugs)Triumph Catalogue Remarks: From Engine No. 8997E |
||||
A1AD | 509009 |
ENGINE UINT (Less Water Pump, Distributor, Dy- namo, Petrol Pump, Oil Filter, Thermo stat, Exhaust Manifold, Carburettor and Sparking Plugs)Triumph Catalogue Remarks: From Engine No. 50001E |
||||
A1AE | 503707 |
ENGINE UINT (Less Water Pump, Distributor, Dy- namo, Petrol Pump, Oil Filter, Thermo stat, Exhaust Manifold, Carburettor and Sparking Plugs)Triumph Catalogue Remarks: From Engine No. 9359E |
||||
A1AF | 501678 |
DECARBONISING SETTriumph Catalogue Remarks: From Engine No. 1 |
1 |
£60.96 Ex VAT @ 20% |
||
A1AG | 505281 |
DECARBONISING SETTriumph Catalogue Remarks: From Engine No. 8637E |
1 |
£101.03 Ex VAT @ 20% |
||
A1AH | 509827 |
ENGINE GASKET SETTriumph Catalogue Remarks: From Engine No. 1 |
||||
A1 | 502363 |
CYLINDER BLOCK ASSEMBLYRevington TR information: not available new, use second hand part 502363SH |
1 | |||
A2 | Cap, bearing, front Not serviced |
1 | ||||
A2A | Cap, bearing, centre Not serviced |
1 | ||||
A3 | Cap, bearing, rear Not serviced |
1 | ||||
A4 | 058335 |
Packing, felt, rear bearing cap |
2 |
£6.31 Ex VAT @ 20% |
||
A5 | 057121 |
Screw, set, bearing caps to block |
6 |
£7.34 Ex VAT @ 20% |
||
A6 | 101587 |
Washer, spring, on screws |
6 | |||
A7 | 056405 |
Bush, oil pump drive shaft |
1 |
£73.03 Ex VAT @ 20% |
||
A7A | 044473 |
Plug, core, rear of camshaft |
1 |
£3.22 Ex VAT @ 20% |
||
A8 | 567650 |
Plug, core, ends of oil gallery |
2 | |||
A8A | 102785 |
Screw, set, in side of oil galleryRevington TR information: May need to consider second hand. |
3 | |||
A9 | 500463 |
Washer, copper, on setscrew |
3 | |||
A9A | HU0954 |
Screw, set, in side of oil gallery |
1 | |||
A9B | 500464 |
Washer, copper, on setscrew |
1 | |||
A10 | 061478 |
Tap, water drainRevington TR information: Brass Drain tap with a parallel 1/2"UNF thread, used in the engine block of TR2-5 to drain the coolant. This tap can be used on later TR's instead of the standard blanking plug, or indeed in... READ MORE |
1 |
£24.19 Ex VAT @ 20% |
||
A11 | WF0511 |
Washer, fibre, on drain tap |
A/R | |||
A12 | 106959 |
Stud, short, cylinder head attachment at front, centre and rear of blockTriumph Catalogue Remarks: From Engine No. 1 |
6 |
£17.27 Ex VAT @ 20% |
||
A13 | 106960 |
Stud, long, cylinder head attachment adjacent to centre of cylindersTriumph Catalogue Remarks: From Engine No. 2 |
4 |
£17.64 Ex VAT @ 20% |
||
A13A | 113570 |
Stud, short, cylinder head attachment at front, centre and rear of block-R.H. side of engineTriumph Catalogue Remarks: From Engine No. 13052E |
3 |
£21.97 Ex VAT @ 20% |
||
A13B | 106959 |
Stud, short, cylinder head attachment at front, centre and rear of block-L.H. side of engineTriumph Catalogue Remarks: From Engine No. 13052E |
3 |
£17.27 Ex VAT @ 20% |
||
A13C | 113169 |
Stud, long, cylinder head attachment adjacent to centre of cylinders-R.H. side of engineTriumph Catalogue Remarks: From Engine No. 13052E |
2 |
£19.90 Ex VAT @ 20% |
||
A13D | 106960 |
Stud, long, cylinder head attachment adjacent to centre of cylinders-L.H. side of engineTriumph Catalogue Remarks: From Engine No. 13052E |
2 |
£17.64 Ex VAT @ 20% |
||
A13E | 113570 |
Stud, cylinder headRevington TR information: 1/2"UNC |
2 |
£21.97 Ex VAT @ 20% |
||
A13F | 121734 |
Stud, cylinder head |
1 |
£36.85 Ex VAT @ 20% |
||
A13G | V7318 |
Stud, oil pump attachment |
3 | |||
A14 | V7322 |
Stud, petrol pump attachment |
2 | |||
A15 | V7322 |
Stud, distributor pedestal attachment |
2 | |||
A16 | V7318 |
Stud, front engine plate and timing cover attachment |
1 | |||
A17 | DP0512 |
Dowel, locating front engine plate and timing cover |
2 | |||
A18 | V3718 |
Stud, gearbox attachment |
3 | |||
A18A | DP0612 |
Dowel, locating gearbox on rear face of cylinder block |
2 | |||
A19 | 105359 |
Stud, pressure oil filter attachment lower frontTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A19A | 112170 |
Stud, pressure oil filter attachment lower frontTriumph Catalogue Remarks: From Engine No. 9952E |
1 | |||
A20 | HB0858 |
Bolt, pressure oil filter attachment upper front |
1 | |||
A20A | 112233 |
Bolt, pressure oil filter attachment upper frontTriumph Catalogue Remarks: From Engine No. __________ |
1 | |||
A21 | HB0882 |
Bolt, pressure oil filter attachment upper rearTriumph Catalogue Remarks: From Engine No. __________ |
1 | |||
A22 | HB0874 |
Bolt, pressure oil filter attachment lower rearTriumph Catalogue Remarks: From Engine No. __________ |
1 | |||
A22A | 112231 |
Bolt, pressure oil filter attachment lower rearTriumph Catalogue Remarks: From Engine No. __________ |
1 | |||
A23 | 055810 |
FRONT SEALING BLOCKRevington TR information: Sealing block, front of engine Tr2-4A. Consider original second hand part 055810SH |
1 | |||
A24 | 059381 |
Pad, sealing fitted in ends of block |
2 |
£1.21 Ex VAT @ 20% |
||
A25 | 056574 |
Screw, Sealing block attachment |
2 |
£2.05 Ex VAT @ 20% |
||
A26 | 060862 |
REAR OIL SEAL ASSEMBLYRevington TR information: This original oils seal arrangement is prone to severe leakage. This is due the inherent weakness of the reverse scroll design, where there is no physical contact between the seal and the crankshaft. The reverse scroll... READ MORE |
1 |
£87.40 Ex VAT @ 20% |
||
A27 | HU0755 |
Screw, set oil seal to cylinder block |
8 | |||
A27A | WL0207 |
Washer, spring, on screw |
8 | |||
A28 | 105539 |
CYLINDER LINER (GRADED F.G.H.)Revington TR information: Liners 83mm Standard Sizes up to +40 available |
4 |
£104.11 Ex VAT @ 20% |
||
A29 | 108024 |
Gasket, linerTriumph Catalogue Remarks: From Engine No. 1 |
2 | |||
A29A | 112789 |
Gasket, linerTriumph Catalogue Remarks: From Engine No. 9173E |
2 |
£3.79 Ex VAT @ 20% |
||
A30 | 301251 |
FRONT ENGINE PLATERevington TR information: the pin is 056763 |
1 | |||
A31 | 056389 |
Washer, joint, between plate and cylinder block |
1 |
£2.24 Ex VAT @ 20% |
||
A31A | HU0856 |
Screw, set front plate attachment |
5 | |||
A31B | WL0208 |
Washer, spring, on screw |
5 | |||
A32 | 059180 |
FRONT ENGINE MOUNTINGRevington TR information: TR2-3B engine Mounting standard. This mounting has a shore hardness of 55/60. Consider 059180U 70 shore hardness if a slightly harder mounting is required for competition use or where significantly extra torque than standard is likely... READ MORE |
2 |
£15.64 Ex VAT @ 20% |
||
A32A | TN3209 |
Nut, nyloc, mounting to front engine plate |
2 | |||
A32B | 109582 |
Piece, packing, between engine mouinting and frameRevington TR information: SHim under engine mount to adjust engine height. Consider original second hand part 109582SH. |
A/R |
£7.43 Ex VAT @ 20% |
||
A32C | 106428 |
Bracket, steady, on both sides of mountingRevington TR information: Consider original second hand part number 106428SH. . |
4 |
£17.27 Ex VAT @ 20% |
||
A32D | HU0807 |
Screw, set, mounting and steady bracket to frame |
2 | |||
A32E | TN3208 |
Nut, nyloc, on screw |
2 | |||
A33 | 056638 |
OIL SUMP ASSEMBLYTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A33A | 115350 |
OIL SUMP ASSEMBLYTriumph Catalogue Remarks: From Engine No. 18902E |
1 | |||
A34 | 056646 |
Washer, joint, between sump and cylinder block |
1 | |||
A35 | V7535 |
Plug, oil, drainTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A35A | 114774 |
Plug, oil, drainTriumph Catalogue Remarks: From Engine No. 18902E |
1 |
£5.87 Ex VAT @ 20% |
||
A36 | WF0524 |
Washer, fibre, on screwTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A37 | 100749 |
Screw, set, sump to cylinder block |
16 | |||
A37A | HU0855 |
Screw, set, sump to front sealing block |
1 | |||
A37B | 105220 |
Screw, set, sump, breather pipe clip and slave cylinder stay to block |
2 | |||
A37C | WL0208 |
Washer, spring, on setscrews |
19 | |||
A38 | 102139 |
DipstickRevington TR information: Consider also 102139SH and 102139SHPC |
1 |
£31.63 Ex VAT @ 20% |
||
A39 | 032307 |
Washer, felt, on dipstick |
1 |
£1.82 Ex VAT @ 20% |
||
A40 | 201650 |
BREATHER PIPE ASSEMBLYTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A40A | 202126 |
BREATHER PIPE ASSEMBLYTriumph Catalogue Remarks: From Engine No. 972E |
1 | |||
A40B | 205020 |
BREATHER PIPE ASSEMBLYTriumph Catalogue Remarks: From Engine No. _____________ |
1 | |||
A41 | 106296 |
Clip, pipe to cylinder blockTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A41A | 120211 |
Bracket, pipe to cylinder blockRevington TR information: No Longer Available see 120211SH |
1 | |||
A41B | WM0083 |
Washer, packing, under clip |
1 | |||
A42 | HB0805 |
Bolt, clip to pipe |
1 | |||
A43 | HN2008 |
Nut, locking bolt |
1 | |||
A43A | WL0208 |
Washer, spring, under nut |
1 | |||
A44 | 501415 |
COMBUSTION HEAD ASSEMBLY (Complete with Valves and Springs) Note :-503837 with Gasket 113168 may be used for replacement purposesTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A44A | 503837 |
COMBUSTION HEAD ASSEMBLY (Complete with Valves and Springs) Note :-503837 with Gasket 113168 may be used for replacement purposesTriumph Catalogue Remarks: From Engine No. 9350E |
1 | |||
A44B | 503838 |
COMBUSTION HEAD ASSEMBLY (Complete with Valves and Springs) Note :-503837 with Gasket 113168 may be used for replacement purposesTriumph Catalogue Remarks: From Engine No. 13052E |
1 | |||
A44C | 501209 |
COMBUSTION HEAD ASSEMBLY (Less Valves and Springs) Note :-503662 with Gasket 113168 may be used for replacement purposesTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A44D | 503662 |
COMBUSTION HEAD ASSEMBLY (Less Valves and Springs) Note :-503662 with Gasket 113168 may be used for replacement purposesTriumph Catalogue Remarks: From Engine No. 9350E |
1 | |||
A44E | 503663 |
COMBUSTION HEAD ASSEMBLY (Less Valves and Springs) Note :-503662 with Gasket 113168 may be used for replacement purposesTriumph Catalogue Remarks: From Engine No. 13052E |
1 | |||
A44F | PS1603 |
Plug, core, top face of combustion headRevington TR information: This Core Plug is threaded. The thread is 1" UNF x 12TPI, |
1 |
£6.96 Ex VAT @ 20% |
||
A44G | 200906 |
Plate, compression, between combustion head and cylinder block |
1 | |||
A44H | 202775 |
Gasket, combustion head to cylinder block Note :-For use In Countries where high octane fuel Is unobtainable, to provide a lower compression ratioRevington TR information: TR2-4A Steel shim head gasket 87mm - 0.5mm (0.020") thick when compressed This Gasket can be shaped to suit 87-89mm liner diameters and can also be used on engines with 83 or 86mm liners. This gasket... READ MORE |
1 |
£124.44 Ex VAT @ 20% |
||
A45 | 100792 |
Tube, sealing, push rodRevington TR information: These tubes, made from Aluminium, need to be pressed gently in. Use a hand press, not a fly press. Our experience is that both aluminium and steel tubes were used by Triumph in original heads. We... READ MORE |
8 |
£9.82 Ex VAT @ 20% |
||
A46 | 058923 |
Guide, valve, InletRevington TR information: Standard steel inlet Valve Guide fitted to TR2-6 inclusive. Also used in the exhaust position on TR4 from CT27411 and all TR4A. Suitable for valves having a shaft diameter of 5/16" (7.94mm), the guide has an... READ MORE |
4 |
£1.84 Ex VAT @ 20% |
||
A47 | 108239 |
Guide, valve, exhaustRevington TR information: Standard steel exhaust Valve Guide fitted to TR2-4 up to CT27410. Suitable for valves having a shaft diameter of 3/8" (9.53mm), the guide has an outside diameter of 17/32" (13.49mm). The guide is 2.0625" long The... READ MORE |
4 |
£9.96 Ex VAT @ 20% |
||
A47A | 111913 |
Insert, valve seat, Inlet |
A/R | |||
A47B | 102941 |
Insert, valve seat, exhaust |
A/R | |||
A48 | 108242 |
Collar, exhaust valve guideRevington TR information: consider second hand original part 108242SH |
4 |
£5.98 Ex VAT @ 20% |
||
A48A | 027378 |
Plug, core, rear face of head |
1 |
£2.18 Ex VAT @ 20% |
||
A48B | 114774 |
Plug, screwed (Not required when heater Is fitted)Revington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
A48D | HU0953 |
Screw, set, rocker oil feed |
1 | |||
A49C | 500464 |
Washer, copper, on setscrew |
1 | |||
A49 | 111717 |
Stud, rocker, pedestal |
4 |
£2.56 Ex VAT @ 20% |
||
A50 | 059011 |
Stud, rocker, cover |
2 | |||
A50A | 107055 |
Stud, manifold attachment, 2.38" long |
2 |
£3.06 Ex VAT @ 20% |
||
A50B | 102474 |
Stud, manifold attachment, 2.06" long |
4 |
£2.88 Ex VAT @ 20% |
||
A50C | 058688 |
Stud, manifold attachment, 1 11/16 longTriumph Catalogue Remarks: From Engine No. 1 |
2 | |||
A50D | 058688 |
Stud, manifoldTriumph Catalogue Remarks: From Engine No. _________ |
1 | |||
A50E | 058917 |
Stud, manifoldTriumph Catalogue Remarks: From Engine No. _________ |
1 | |||
A50F | WP0033 |
WasherTriumph Catalogue Remarks: From Engine No. _________ |
1 | |||
A50G | DP0512 |
Dowel, manifold locating |
2 | |||
A51 | 202127 |
Gasket, between combustion head and cylinder blockRevington TR information: TR2 Head Gasket 83mm No longer available. Use 205481 or gasket set 505281. |
1 | |||
A52 | 110962 |
Nut, combustion head attachmentRevington TR information: 10 required |
10 |
£2.94 Ex VAT @ 20% |
||
A52A | WP0029 |
Washer, plain, under nutRevington TR information: Hardened washer for underneath the head nut, TR2-TR4A. See linked part for alternative |
10 | |||
A52B | 030123 |
Wire (lead) under nut |
A/R | |||
A52C | 121231 |
Eye, lifting, assembly, frontRevington TR information: lifting Eye, front of the engine, TR2-TR4A and any other car with a 4 cylinder TR or vanguard type engine. This part has been remanufactured to the original design in stainless steel and is supplied unpainted.... READ MORE |
1 |
£60.80 Ex VAT @ 20% |
||
A52D | 121752 |
Bracket, lifting, rearRevington TR information: Engine Lifting Eye rear TR4A. Use our improved part 121752-1 which fits without the need to remove a head stud nut. Consider second hand part 121752SH. |
1 |
£17.04 Ex VAT @ 20% |
||
A53 | 107626 |
Valve, InletRevington TR information: Inlet Valve standard TR2-4A. We have good stock of second hand valves too for those wanting either a cheaper or an original part. in addition we have tow valves available with larger heads. ... READ MORE |
4 |
£14.42 Ex VAT @ 20% |
||
A54 | 108806 |
Valve, exhaust |
4 |
£21.86 Ex VAT @ 20% |
||
A55 | 107492 |
Spring, valve, outer |
8 |
£5.90 Ex VAT @ 20% |
||
A56 | 107493 |
Spring, valve, InnerRevington TR information: Our stock are genuine Leyland parts |
8 |
£3.66 Ex VAT @ 20% |
||
A57 | 102564 |
Spring, auxiliary, exhaust valveRevington TR information: This valve spring is suitable for TR5 and TR6PI up to engine number CP54584 when used with an outer spring 149633 on all valves. Consider spring set RTR1175 |
4 |
£5.71 Ex VAT @ 20% |
||
A58 | 105803 |
Collar, valve springRevington TR information: TR2-4 valve spring Cap. As this part does not wear out, RevingtonTR prefer to supply original second hand parts which can be guaranteed to be the correct shape and material specification. Order 105803SH below. This part... READ MORE |
8 |
£8.10 Ex VAT @ 20% |
||
A59 | 106663 |
Cone, split, retaining collar on valveRevington TR information: There are two collet halves per valve. This part number is for two halves therfore 2 pieces are supplied and priced as 1 collet = 2 halves. Note - Some suppliers sell just 1 half. |
8 prs. |
£4.03 Ex VAT @ 20% |
||
A60 | 057933 |
VALVE TAPPETRevington TR information: Revington TR recommends using an uprated cam follower in favour of the standard part. These are tuftrided and have a drain hole to allow oil to dribble onto the cam lobe. Order part number RTR1024 below.... READ MORE |
8 |
£9.83 Ex VAT @ 20% |
||
A61 | 106968 |
Push rod assemblyTriumph Catalogue Remarks: From Engine No. 1 |
8 |
£23.94 Ex VAT @ 20% |
||
A61A | 114035 |
Push rod assemblyTriumph Catalogue Remarks: From Engine No. 12961E |
8 | |||
A61B | 106968 |
Push rod assemblyTriumph Catalogue Remarks: From Engine No. 55691E |
8 |
£23.94 Ex VAT @ 20% |
||
A61C | 108616 |
Push rod assemblyTriumph Catalogue Remarks: From Engine No. 1 |
8 | |||
A61D | 114048 |
Push rod assemblyTriumph Catalogue Remarks: From Engine No. 12961E |
8 | |||
A61E | 108616 |
Push rod assemblyTriumph Catalogue Remarks: From Engine No. 55691E |
8 | |||
A62 | 111064 |
ROCKER SHAFTRevington TR information: Consider tuftrided part RTR1103. |
1 |
£49.22 Ex VAT @ 20% |
||
A63 | 055822 |
Pedestal, rocker, drilledTriumph Catalogue Remarks: From Engine No. ______ |
1 | |||
A63A | 112545 |
Pedestal, rocker, drilledTriumph Catalogue Remarks: From Engine No. 12564E |
1 | |||
A64 | 042880 |
Screw, locking, pedestal to shaft |
1 | |||
A64A | 052337 |
Washer, shakeproof, on screw |
1 | |||
A65 | 055823 |
Pedestal, rocker, plainTriumph Catalogue Remarks: From Engine No. ______ |
3 | |||
A65A | 112546 |
Pedestal, rocker, plainTriumph Catalogue Remarks: From Engine No. 12564E |
3 | |||
A66 | HN2009 |
Nut, rocker, pedestal to combustion head |
4 | |||
A67 | WL0209 |
Washer, spring, under nutTriumph Catalogue Remarks: Used with steel Rocker Pedestals only. Use WP009 with aluminium Rocker Pedestals |
4 | |||
A68 | 108012 |
Rocker, No. 1 assembly |
4 |
£18.50 Ex VAT @ 20% |
||
A68A | 044370 |
Bush, rocker |
8 |
£3.68 Ex VAT @ 20% |
||
A69 | 108014 |
Rocker, No. 2 assembly |
4 |
£12.31 Ex VAT @ 20% |
||
A69A | 044370 |
Bush, rocker |
8 |
£3.68 Ex VAT @ 20% |
||
A70 | 109495 |
Ball-pin (adjustable) in rockersRevington TR information: All TR2-6 use a similar rocker adjusting screw and nut principle. In fact all TR2-4A and TR5, TR6CP, CF and CR use the same screw 109495 and nut 057110 (now superceded to 51K1178). TR250 and TR6CC... READ MORE |
8 |
£7.02 Ex VAT @ 20% |
||
A71 | 057110 |
Nut, locking ball-pin |
8 | |||
A72 | 056434 |
Spring, rocker, centreTriumph Catalogue Remarks: From Engine No. _______ |
1 | |||
A72A | 128074 |
Spring, rocker, centreTriumph Catalogue Remarks: From Engine No. _______ |
1 | |||
A73 | 055873 |
Spring, rocker, intermediateTriumph Catalogue Remarks: From Engine No. _______ |
2 | |||
A73A | 128075 |
Spring, rocker, intermediateTriumph Catalogue Remarks: From Engine No. _______ |
2 | |||
A74 | 044630 |
Spring, rocker, outer |
2 |
£2.24 Ex VAT @ 20% |
||
A75 | 060733 |
Collar, on ends of shaft |
2 | |||
A76 | 058334 |
Pin (Mills), securing collar |
2 | |||
A77 | 302157 |
ROCKER COVER ASSEMBLYTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A77A | 302610 |
ROCKER COVER ASSEMBLYTriumph Catalogue Remarks: From Engine No. 18230E |
1 | |||
A78 | 106386 |
Cap, oil filler and breather assemblyTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A78A | 113569 |
Cap, oil filler and breather assemblyTriumph Catalogue Remarks: From Engine No. 17372E |
1 |
£61.80 Ex VAT @ 20% |
||
A79 | 055943 |
Washer, joint, cover to combustion head (Alternative to Part No. 121219) |
1 | |||
A79A | 121219 |
Washer, joint, cover to combustion head (Alternative to Part No. 55943) |
1 | |||
A79B | 121752 |
Bracket, lifting, rearRevington TR information: Engine Lifting Eye rear TR4A. Use our improved part 121752-1 which fits without the need to remove a head stud nut. Consider second hand part 121752SH. |
1 |
£17.04 Ex VAT @ 20% |
||
A80 | YN2908 |
Nut, nyloc, rocker cover attachment |
2 | |||
A80A | WP0008 |
Washer, plain, under nut |
2 | |||
A80B | WF0508 |
Washer, fibre, under nut |
2 |