Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR4A Plate P - GEARBOX: CASING, TOP COVER AND MOUNTING.
<< Return to Triumph Catalogue Plate ListAlso in this listing
Gear lever grommet item P75APlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
P1AA | 510920 |
GEARBOX UNIT (less Gear Lever)Revington TR information: Not available new use our gearbox exchange/rebuild service detailed under part number G/BOXEX |
1 | |||
P1BB | 511499 |
GEARBOX UNIT (less Gear Lever)Triumph Catalogue Remarks: Reconditioned Unit |
1 | |||
P1CC | 510921 |
GEARBOX UNIT (OVERDRIVE) (less Gear Lever)Revington TR information: Not available new use our gearbox and overdrive exchange/rebuild service detailed under part number G/BOXEX and O/DEXA |
1 | |||
P1DD | 511500 |
GEARBOX UNIT (OVERDRIVE) (less Gear Lever)Triumph Catalogue Remarks: Reconditioned unit |
1 | |||
Comprising: Top Cover Assembly No. 511027, Mainahaft No. 208052 and all other details in Gearbox Section less Gearbox Extension No. 305048 |
||||||
P1 | 210622 |
GEARBOX AND CLUTCH HOUSINGRevington TR information: TR4A-6 (all models) Bell Housing & Gear Case. Only two types of gear case were used on TR4-6. The TR4 being the first model used a gear casing (part number 304692) where the bell housing flange... READ MORE |
1 | |||
P2 | 137651 |
Bush, clutch shaft housingRevington TR information: These bearings are narrow and give rise to excessive cross shaft wear. Consider using bronze bush RTR1204 that gives a larger support area |
1 |
£9.08 Ex VAT @ 20% |
||
P2A | 060420 |
Plug, core, front end of gearbox |
1 | |||
P3 | 114774 |
Plug, oil level, in side of gearboxRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
P4 | 114774 |
Plug, drain, in bottom of gearboxRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
P5 | 100157 |
FRONT END COVERRevington TR information: TR2-6 Gearbox nose with 1.66" (42.61mm) diameter sliding section to accommodate standard 31.75mm (1.25") diameter input shaft and standard release carrier. Consider original second hand part number 100157SH or where necessary Triumph 2000/2500 gearbox Nose... READ MORE |
1 |
£63.24 Ex VAT @ 20% |
||
P6 | 060215 |
Seal, in front end cover |
1 | |||
P7 | 059537 |
Washer, joint Front end cover to gearboxRevington TR information: Consider gasket kit RTR1003 |
1 |
£1.39 Ex VAT @ 20% |
||
P8 | WU3857 |
Screw, wedglok Front end cover to gearbox |
4 | |||
P9 | 114034 |
Washer, plain Front end cover to gearbox |
4 | |||
P10 | 055773 |
Cover, countershaft end |
1 |
£10.01 Ex VAT @ 20% |
||
P11 | 055774 |
Gasket Countershaft end cover to Pit gearbox |
1 |
£1.80 Ex VAT @ 20% |
||
P11A | WU3857 |
Screw, wedglok Countershaft end cover to Pit gearbox |
2 | |||
P13 | 114034 |
Washer, plain Countershaft end cover to Pit gearbox |
2 | |||
P14 | 305048 |
GEARBOX EXTENSIONRevington TR information: Gearbox extension ( none overdrive. Not available new, use 305048SH |
1 | |||
P15 | 058958 |
Seal, oil, rear of extension |
1 | |||
P16 | 132465 |
Washer, paper Extension to gearbox |
1 |
£2.42 Ex VAT @ 20% |
||
P17 | HU0858 |
Screw, set Extension to gearbox |
5 | |||
P17A | HB0866 |
Bolt Extension to gearbox |
1 | |||
P18 | WL0208 |
Washer, lock Extension to gearbox |
6 | |||
P18A | 107749 |
SPEEDO DRIVEN GEAR AND BEARING ASSEMBLYRevington TR information: Consider part 146542 |
1 |
£126.67 Ex VAT @ 20% |
||
P19 | 058969 |
Gear, speedo drivenRevington TR information: Steel TR2-4A speedometer drive gear Not available new. Use 058969SH TR2-4A Gearboxes without overdrive and overdrives used a brass bearing and a steel gear with 15 teeth 107747 Brass Bearing Housing 058969 Steel Gear 15 tooth TR5-6 Gearboxes... READ MORE |
1 | |||
P20 | 107747 |
Bearing, speedo driven gearRevington TR information: Brass speedometer drive bearing TR2-4A TR2-4A Gearboxes without overdrive and overdrives used a brass bearing and a steel gear with 15 teeth 107747 Brass Bearing Housing 058969 Steel Gear 15 tooth TR5-6 Gearboxes without overdrive and 'A' type... READ MORE |
1 | |||
P21 | 060247 |
Seal, oil, between screwed end and bearing |
1 |
£6.00 Ex VAT @ 20% |
||
P22 | 060246 |
End, screwed |
1 |
£4.14 Ex VAT @ 20% |
||
P23 | 107750 |
Ring, seal |
1 | |||
P24 | 107746 |
Screw, locking Bearing to extensionRevington TR information: Special Pinch Bolt holding the speedometer drive into the gearbox casing. Not available new. Use 107746SH or modify Screw SH505121 as described in 'More About This Part'. This special bolt has an overall length of... READ MORE |
1 | |||
P25 | WL0208 |
Washer, lock Bearing to extension |
1 | |||
P25A | 509852 |
TOP COVER ASSEMBLY |
1 | |||
P26 | 511027 |
Cover, top, complete with plugs |
1 | |||
P27 | 108114 |
Plug, fitted In coverTriumph Catalogue Remarks: (2 off not required with Overdrive fitted, 1 off not required with Reverse Light fitted) |
3 |
£3.47 Ex VAT @ 20% |
||
P28 | 501258 |
Washer, copper, on plug |
3 | |||
P29 | 104449 |
Plug, welch Interlock aperture |
1 |
£1.90 Ex VAT @ 20% |
||
P30 | 104449 |
Plug, welch selector shafts |
3 |
£1.90 Ex VAT @ 20% |
||
P31 | 054505 |
Plug, welch in sides of top cover |
2 |
£2.39 Ex VAT @ 20% |
||
P32 | 128066 |
Shaft, selector 1st and 2ndRevington TR information: Consider second hand original part 128066SH |
1 |
£21.47 Ex VAT @ 20% |
||
P33 | 129986 |
Shaft, selector 3rd and top |
1 | |||
P34 | 132389 |
Shaft, selector Reverse |
1 | |||
P35 | 127386 |
Selector 1st and 2ndRevington TR information: Selector 1st and 2nd. Not currently available new (July 2018) however we usually have second hand parts for sale |
1 | |||
P36 | 127385 |
Selector ReverseRevington TR information: Selector reverse. When not available new, order second hand part 127385SH |
1 |
£75.88 Ex VAT @ 20% |
||
P37 | 128067 |
Fork, selector 1st and 2ndRevington TR information: Fork Selector 1st and 2nd. Not available new however we usually have second hand parts for sale |
1 | |||
P38 | 127387 |
Fork, selector 3rd and topRevington TR information: Not currently available. use second hand part 127387SH |
1 | |||
P39 | 129780 |
Actuator, reverse |
1 |
£15.19 Ex VAT @ 20% |
||
P40 | 128063 |
Sleeve, 1st/2nd shaftRevington TR information: Tube on 1st and 2nd shaft 74.6mm long Three tubes are used on the selector shafts of TR4-6 gearboxes 128063 on 1st and 2nd shaft 74.6mm long 117811 on 3rd and 4th shaft 82.2mm long 129779 on reverse shaft 50.4mm long |
1 | |||
P41 | 117811 |
Sleeve, 3rd and top shaftRevington TR information: steel tube 3/4th speed change shaft TR4-6 gearbox top cover Three tubes are used on the selector shafts of TR4-6 gearboxes 128063 on 1st and 2nd shaft 74.6mm long 117811 on 3rd and 4th shaft 82.2mm long 129779 on reverse shaft 50.4mm... READ MORE |
1 |
£9.53 Ex VAT @ 20% |
||
P42 | 129779 |
Sleeve, reverse selector shaftRevington TR information: Tube on reverse shaft 50.4mm long. Our stock is genuine Leyland Three tubes are used on the selector shafts of TR4-6 gearboxes 128063 on 1st and 2nd shaft 74.6mm long 117811 on 3rd and 4th shaft 82.2mm long 129779 on reverse shaft... READ MORE |
1 |
£2.29 Ex VAT @ 20% |
||
P43 | 122653 |
Screw, taper, securing selectors and forks to shaft |
5 |
£7.14 Ex VAT @ 20% |
||
P44 | 106050 |
Ring, sealing, selector shaft |
3 |
£1.26 Ex VAT @ 20% |
||
P45 | 106051 |
Plate, cover, over sealing ring |
1 |
£7.94 Ex VAT @ 20% |
||
P46 | HU0704 |
Screw, set Cover plate to top cover |
2 | |||
P47 | WL0207 |
Washer, lock Cover plate to top cover |
2 | |||
P48 | 105788 |
Roller, interlock Fitted in top cover |
1 |
£4.58 Ex VAT @ 20% |
||
P49 | BL0024 |
Ball, interlock Fitted in top cover |
2 | |||
P50 | BL0024 |
Ball, selector shaft, 1st and 2nd gear |
1 | |||
P51 | 101236 |
Spring, bail |
1 | |||
P52 | 106481 |
Plunger, selector shaft, 3rd and top |
1 |
£17.56 Ex VAT @ 20% |
||
P53 | 106489 |
Spring, plunger |
1 |
£1.04 Ex VAT @ 20% |
||
P54 | 109401 |
Piece, distance, plungerRevington TR information: No longer available, use second hand part 109401SH |
1 | |||
P55 | 132388 |
Plunger, reverse selector |
1 | |||
P56 | 106489 |
Spring, reverse plunger |
1 |
£1.04 Ex VAT @ 20% |
||
P57 | 109401 |
Piece, distance, selector shaft plunger-ReverseRevington TR information: No longer available, use second hand part 109401SH |
1 | |||
P58 | 108166 |
Plug, retaining springRevington TR information: No longer available, we can however supply second hand parts 108166SH |
3 | |||
P59 | 105758 |
Washer, joint, top cover |
1 |
£1.73 Ex VAT @ 20% |
||
P60 | HB0873 |
Bolt Top cover attachment |
2 |
£0.95 Ex VAT @ 20% |
||
P61 | HB0871 |
Bolt Top cover attachment |
2 | |||
P62 | 056370 |
Screw, set Top cover attachment |
4 |
£3.80 Ex VAT @ 20% |
||
P63 | WL0208 |
Washer, lock Top cover attachment |
8 | |||
P64 | 143624 |
CHANGE SPEED LEVER ASSEMBLYRevington TR information: Not available new use second hand part number 143624SH. There are 4 basic types of gear lever fitted to TR2-6, which are all interchangeable, provided the correct top cover and fixings are used. There are 4... READ MORE |
1 | |||
P65 | 112424 |
Plunger In ball end |
1 |
£5.98 Ex VAT @ 20% |
||
P66 | 137988 |
Spring In ball end |
1 | |||
P67 | 109531 |
Spring Fitted under cap |
1 | |||
P68 | 112442 |
Retainer, spring Fitted under capRevington TR information: No longer vailable, use second hand part 112442SH |
1 | |||
P69 | 131246 |
KnobRevington TR information: Fitted up to CP53853 and now available new. This knob is a plain black sphere with no logo. Consider second hand part 131246SH or you can use part number 144095 but reverse is on the left... READ MORE |
1 |
£48.46 Ex VAT @ 20% |
||
P70 | 506157 |
Nut, jam |
1 | |||
P71 | 105787 |
Cap, change speed lever |
1 | |||
P72 | HU0703 |
Screw, set Cap to top cover |
1 | |||
P73 | WL0207 |
Washer, lock Cap to top cover |
1 | |||
P74 | HB0727 |
Bolt Lever to top cover |
1 | |||
P75 | TN3207 |
Nut, nyloc Lever to top cover |
1 | |||
P75A | 709313 |
Grommet, gear lever UpperTriumph Catalogue Remarks: Up to Comm. No. CTC57521 |
1 | |||
P75B | 709312 |
Grommet, gear lever LowerTriumph Catalogue Remarks: Up to Comm. No. CTC57522 |
1 | |||
P75C | 709328 |
Grommet, gear lever UpperTriumph Catalogue Remarks: From Comm. No. CTC57522 and future |
1 |
£8.28 Ex VAT @ 20% |
||
P75D | 709329 |
Grommet, gear lever LowerTriumph Catalogue Remarks: From Comm. No. CTC57522 and future |
£17.30 Ex VAT @ 20% |
|||
Note:-When either 709313 or 709312 need renewal order 1 of each 709328 and 709329 |
||||||
GEARBOX ATTACHMENT DETAILS |
6 | |||||
P76E | HU0860 |
Screw, set Gearbox to engine |
||||
P76F | WL0208 |
Washer, lock Gearbox to engine |
6 | |||
P76G | HN2008 |
Nut Gearbox to engine |
3 | |||
P76H | WL020B |
Washer, lock Gearbox to engine |
3 | |||
P76 | 104086 |
REAR ENGINE MOUNTINGRevington TR information: This standard Mounting supporting the gearbox or overdrive is made with 55/60 shore hardness rubber. For competition or where significantly extra torque than standard is likely to be applied to the engine mountings use uprated part... READ MORE |
1 |
£21.62 Ex VAT @ 20% |
||
P77 | 132951 |
Strap, anti-vibration Gearbox extension to top coverRevington TR information: Not available new, use second hand part 132951SH 131711 was fitted up to gearbox CT17814. 132951 was fitted from CT17815. They are identical other than part number 132951 has an extra hole just above the... READ MORE |
1 | |||
P78 | 131690 |
Washer, spacing Gearbox extension to top coverRevington TR information: This spacer 1" outside diameter, 0.53" internal diameter and 1/4" thick is used to space anti-vibration Strap 131711 off the 'A' type gearbox mounting so that it will line up with the ... gear lever... READ MORE |
1 |
£2.41 Ex VAT @ 20% |
||
P79 | WM0093 |
Washer, plain Gearbox extension to top cover |
1 |
£0.40 Ex VAT @ 20% |
||
P79A | 144314 |
WEIGHT AND BUSH ASSEMBLY,Triumph Catalogue Remarks: Normal condition |
1 | |||
P79B | 132604 |
VIBRATION DAMPERTriumph Catalogue Remarks: Overdrive condition |
1 | |||
P79C | 132607 |
Clip, vibration damperRevington TR information: This clip supports vibration damper 132604 on the back of the TR4 gearbox |
1 | |||
P79D | HB1025 |
Bolt Securing weight to clip |
1 | |||
P79E | WP1069 |
Washer, plain Securing weight to clip |
1 | |||
P79F | YN2910 |
Nut, nyloc Securing weight to clip |
1 | |||
P79G | 132608 |
Strap, vibration damperRevington TR information: This strap joins anti-vibration strap 132951 ro vibration damper 132604 131711 was fitted up to gearbox CT17814. 132951 was fitted from CT17815. They are identical other than part number 132951 has an extra hole just above... READ MORE |
1 | |||
P79H | HU0806 |
Screw, Set Securing clip to strap |
1 | |||
P79I | H80811 |
Bolt Securing clip to strap |
1 | |||
P79J | YN2908 |
Nut, nyloc Securing clip to strap |
1 | |||
P80 | H81112 |
Bolt Engine mounting to gearbox extension |
1 | |||
P81 | HB1115 |
Bolt Engine mounting to gearbox extension |
1 | |||
P82 | HN2011 |
Nut Engine mounting to gearbox extension |
1 | |||
P83 | WL0211 |
Washer, lock Engine mounting to gearbox extension |
2 | |||
P84 | HN2010 |
Nut Engine mounting to crossmember |
2 | |||
P85 | WL0210 |
Washer, lock Engine mounting to crossmember |
2 | |||
P85A | WP0010 |
Washer, plain Engine mounting to crossmember |
2 | |||
P86 | 112445 |
CLUTCH HOUSING COVERRevington TR information: No longer available new. Consider original second hand part number 112445SH. . |
1 | |||
PB7 | HU0808 |
Screw, set Securing cover to gearbox |
2 | |||
P87A | HU0810 |
Screw, set Securing cover to gearbox |
2 | |||
P88 | HN2008 |
Nut Securing cover to gearbox |
4 | |||
P89 | WL0208 |
Washer, lock Securing cover to gearbox |
4 |
Also in this listing
Gear lever grommet item P75A