Suspension and steering
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR4A Plate S - FRONT SUSPENSION AND FRONT HUBS.
<< Return to Triumph Catalogue Plate ListPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
S1AA | 307503 |
FRONT SUSPENSION UNIT Bolt on Disc Wheels R.H. |
1 | |||
S1BB | 307504 |
FRONT SUSPENSION UNIT Bolt on Disc Wheels L.H. |
1 | |||
S1CC | 514241 |
FRONT SUSPENSION UNIT Centre Lock, Wire Wheels R.H. |
1 | |||
S1DD | 514242 |
FRONT SUSPENSION UNIT Centre Lock, Wire Wheels L.H. |
1 | |||
The above units comprise:-Upper Wishbone, Top Inner Fulcrum, Vertical Link, Stub Axle, Hub, Brake Unit, Tie Rod Lever, Bottom Trunnion, Lower Wish bone Arms and Lower Inner Fulcrum Brackets |
||||||
S1 | 200659 |
UPPER FULCRUM PIN-INNERRevington TR information: We prefer not sell this part loose, as it is easy to fit the wrong way round. We sell 200659K, which includes a fitting instruction. Consider second hand part 200659SHK or second hand part powder coated... READ MORE |
2 |
£50.26 Ex VAT @ 20% |
||
S2A | 013599 |
Screw, set Top inner fulcrum pin to chassis frame |
8 | |||
S2B | WL0209 |
Washer, spring Top inner fulcrum pin to chassis frame |
8 | |||
S2 | 133504 |
UPPER WISHBONE ARM ASSEMBLY - FRONTRevington TR information: Consider also second hand part 133504SH or second hand part powder coated 133504SHPC |
2 |
£74.96 Ex VAT @ 20% |
||
S3 | 133507 |
UPPER WISHBONE ARM ASSEMBLY- REARRevington TR information: Consider also second hand part 133507SH or second hand part powder coated 133507SHPC |
2 |
£74.96 Ex VAT @ 20% |
||
S4 | 102228 |
Bush, rubber Wishbone to fulcrum pinRevington TR information: Upper inner front suspension wishbone bush, rubber TR2-6, also lower inner bush TR2-3. Our stock is genuine Leyland manufacture, the rubber is therefore significantly higher quality than aftermarket reproduction products. We offer a Superpro Polyurethane improved... READ MORE |
8 |
£3.13 Ex VAT @ 20% |
||
S5 | WM0069 |
Washer, plain Wishbone to fulcrum pin |
4 | |||
S6 | LN2210 |
Nut, slotted Wishbone to fulcrum pin |
4 | |||
S7 | P00010 |
Pin, cotter Wishbone to fulcrum pin |
4 | |||
S8 | 142394 |
Ball joint assembly, upper wishbone |
2 | |||
S9 | 138509 |
Gaiter, between ball joint and vertical link |
2 |
£9.89 Ex VAT @ 20% |
||
S10 | 138869 |
Clip, gaiterRevington TR information: This ring secures the gaiter on GSJ131 ball joint. As it is not available Revington TR recommend using lock wire. We can supply this by the meter RTR5285-16 or a full drum RTR5285-16M |
2 | |||
S11 | 501024 |
Nipple, grease, in top of ball joint |
2 | |||
S12 | 112347 |
Bolt Ball joint assembly to upper wishbone arm assembly |
4 |
£4.12 Ex VAT @ 20% |
||
S13 | YN2909 |
Nut, nyloc Ball joint assembly to upper wishbone arm assembly |
4 | |||
S14 | WP0045 |
Washer, plain Ball joint assembly to upper wishbone arm assembly |
4 | |||
S15 | 307215 |
VERTICAL LINK R.H.Revington TR information: Consider original second hand part number 307215SH. . |
1 |
£191.36 Ex VAT @ 20% |
||
S16 | 307216 |
VERTICAL LINK L.H. |
1 |
£191.36 Ex VAT @ 20% |
||
S17 | YN2911 |
Nut, nyloc, thin Vertical link to ball joint |
2 | |||
S17A | WP0011 |
Washer, plain Vertical link to ball joint |
2 | |||
S18 | 307211 |
Lever, tie rod R.H.Revington TR information: Consider original second hand part 307211SH, or original second hand part powder coated black 307211SHPC. |
1 | |||
S18A | 307212 |
Lever, tie rod L.H.Revington TR information: Consider original second hand part 307212SH or original second hand part powder coated black 307212SHPC |
1 | |||
S18 | 133499 |
Plate, mounting, disc brake caliper R.H.Revington TR information: Fitted from commission Number CT4690 (wire wheels), CT4388 (disc wheels) and future. Not currently available, use second hand part 133499SH or second hand part powder coated black 133499SHPC. |
1 | |||
S19 | 133500 |
Plate, mounting, disc brake caliper L.H.Revington TR information: Fitted from commission Number CT4690 (wire wheels), CT4388 (disc wheels) and future. Not currently available, use second hand part 133500SH or second hand part powder coated black 133500SHPC |
1 | |||
S20 | 118324 |
Bolt Mounting plates to vertical link |
2 |
£4.58 Ex VAT @ 20% |
||
521 | 113144 |
Bolt Mounting plates to vertical link |
2 | |||
S22 | 106641 |
Washer, tab Mounting plates to vertical link |
4 |
£2.76 Ex VAT @ 20% |
||
S23 | YN2909 |
Nut, nyloc Mounting plates to vertical link |
2 | |||
S24 | 113143 |
Bolt Tie rod levers and mounting plates to vertical link |
2 | |||
S25 | 112032 |
Bolt Tie rod levers and mounting plates to vertical link |
2 | |||
S26 | 107106 |
Piece, distance Tie rod levers and mounting plates to vertical linkRevington TR information: This spacer is 24 mm long. Consider also second hand part 107106SH or second hand part powder coated black 107106SHPC. |
4 |
£4.25 Ex VAT @ 20% |
||
S27 | YN2909 |
Nut, nyloc Tie rod levers and mounting plates to vertical link |
4 | |||
S27A | WP0045 |
Washer, plain Dust cover to vertical link |
2 | |||
S27B | TN3209 |
Nut, nyloc Dust cover to vertical link |
2 | |||
S28 | 115763 |
STUB AXLE |
2 |
£36.31 Ex VAT @ 20% |
||
S29 | WP0011 |
Washer, plain Stub axle to vertical link |
2 | |||
S30 | TN3211 |
Nut, thin, nyloc Stub axle to vertical link |
2 | |||
S31 | 107194 |
Seal, oil assembly |
2 | |||
S31A | 100667 |
Seal, felt |
1 | |||
S31B | 100868 |
Retainer, felt seal |
1 |
£1.73 Ex VAT @ 20% |
||
S32 | 100573 |
Bearing, inner, front hub |
2 | |||
S33 | 114284 |
Hub Assembly, frontTriumph Catalogue Remarks: For use with disc wheels only |
2 |
£260.47 Ex VAT @ 20% |
||
S34 | 114282 |
Stud, wheelTriumph Catalogue Remarks: For use with disc wheels only |
8 |
£6.53 Ex VAT @ 20% |
||
S35 | 114283 |
Hub assembly, frontTriumph Catalogue Remarks: For use with wire wheels only |
2 | |||
S36 | 114281 |
Stud, wheelTriumph Catalogue Remarks: For use with wire wheels only |
8 |
£6.66 Ex VAT @ 20% |
||
S36A | 202446 |
Extension hub, R.H.Triumph Catalogue Remarks: For use with wire wheels only |
1 | |||
S37 | 202447 |
Extension hub, L.H.Triumph Catalogue Remarks: For use with wire wheels only |
1 | |||
S38 | 110366 |
Nut, extension to hubTriumph Catalogue Remarks: For use with wire wheels only |
8 |
£2.66 Ex VAT @ 20% |
||
S39 | 100536 |
Bearing, outer |
2 | |||
S40 | 102690 |
Washer, 'D' Front hub to stub axle |
2 |
£5.09 Ex VAT @ 20% |
||
S41 | LN2211 |
Nut, slotted Front hub to stub axleRevington TR information: Some nuts are too thick and do not fit under the cap. We have sourced the correct height nut that fits correctly. |
2 |
£4.38 Ex VAT @ 20% |
||
S42 | PCA020 |
Pin, cotter Front hub to stub axle |
2 | |||
S43 | 102689 |
Cap, grease retainingRevington TR information: Grease cap. consider second hand part 102689SH |
2 |
£7.48 Ex VAT @ 20% |
||
S43A | 142377 |
BOTTOM TRUNNION ASSEMBLY R.H.Revington TR information: consider second hand part 142377SH For the trunnion seal kits see Superpro polyurethane kits below. |
£112.52 Ex VAT @ 20% |
|||
S44 | 142378 |
BOTTOM TRUNNION ASSEMBLY R.H.Revington TR information: consider second hand part 142378SH For the trunnion seal kits see Superpro polyurethane kit below. |
£112.52 Ex VAT @ 20% |
|||
S45 | 142403 |
Stop, steering lock |
2 | |||
S46 | HU0811 |
Screw, set Stop to trunnion |
2 | |||
S47 | WL0222 |
Washer, lock Stop to trunnion |
2 | |||
S48 | 056934 |
Nipple, grease |
2 |
£2.41 Ex VAT @ 20% |
||
S49 | 142402 |
Seal, oil, between trunnion and vertical linkRevington TR information: Use the Superpro polyurethane version SPF2253K for longer life. |
2 |
£11.57 Ex VAT @ 20% |
||
S50 | 307210 |
LOWER WISHBONE ARM ASSEMBLY-FRONT R.H. and REAR LH.Revington TR information: Consider also second hand part 307210SH or second hand part powder coated 307210SHPC |
2 |
£111.76 Ex VAT @ 20% |
||
S51 | 307209 |
LOWER WISHBONE ARM ASSEMBLY-FRONT L H. and REAR R. H.Revington TR information: TR4A-6 Lower Wishbone, left hand front and right hand back. Original part Leyland packaged. Consider also second hand part 307209SH or second hand part powder coated 307209SHPC |
2 |
£108.49 Ex VAT @ 20% |
||
S52 | 139835 |
Bolt, pivot Lower trunnion to lower wishbone |
2 |
£9.80 Ex VAT @ 20% |
||
S53 | 139832 |
Piece, distance Lower trunnion to lower wishboneRevington TR information: Our stock of this sleeve is genuine British Leyland or stainless steel part 139832SS. Consider also trunnion bush kit FSK6TK, two required per car |
4 |
£10.55 Ex VAT @ 20% |
||
S54 | 139833 |
Bearing, nylon Lower trunnion to lower wishboneRevington TR information: This nylon bush is available separately under this part number or in trunnion bush kit FSK6TUK. Superpro Polyurethane offer an improved kit SPF1844K Full kits for the front suspension are available too. |
8 |
£5.36 Ex VAT @ 20% |
||
S55 | 142388 |
Washer, backing Lower trunnion to lower wishboneRevington TR information: This washer is available separately under this part number or in trunnion bush kit FSK6TUK. Our stock is genuine Leyland. Superpro Polyurethane offer an improved kit SPF1844K Full kits for the front suspension are available too.... READ MORE |
8 |
£2.66 Ex VAT @ 20% |
||
S56 | 142387 |
Ring, sealing Lower trunnion to lower wishboneRevington TR information: This ring is available separately under this part number or in trunnion bush kit FSK6TUK. Superpro Polyurethane offer an improved bush kit SPF1844K Full kits for the front suspension are available too. |
8 |
£3.12 Ex VAT @ 20% |
||
S57 | 139834 |
Shield, water Lower trunnion to lower wishboneRevington TR information: This shield is available separately under this part number or in trunnion bush kit FSK6TUK. Our stock is genuine Leyland. Superpro Polyurethane offer an improved bush kit SPF1844K Full kits for the front suspension are available... READ MORE |
8 |
£2.27 Ex VAT @ 20% |
||
S58 | LN2212 |
Nut Lower trunnion to lower wishbone |
2 |
£7.18 Ex VAT @ 20% |
||
S59 | P00012 |
Pin, cotter Lower trunnion to lower wishbone |
2 | |||
S60 | 139715 |
Bracket assembly, lower fulcrum, inner |
4 | |||
S61 | 141481 |
Bush Lower wishbone to mounting bracketRevington TR information: Superpro Polyurethane kit SPF0288K offers a much improved ride and considerably longer life. We also have 141481UK, which is a Nylatron kit |
4 |
£2.78 Ex VAT @ 20% |
||
S62 | HB1121 |
Bolt Lower wishbone to mounting bracket |
4 | |||
S63 | YN2911 |
Nut, nylon Lower wishbone to mounting bracket |
4 | |||
S64 | 139727 |
Shim Bracket to chassis frameRevington TR information: Shim adjusting, steel, front suspension TR4A-6. Revington suggest as an alternative, you use second hand part 139727SH or stainless steel part 139727SH . |
as req'd. |
£6.16 Ex VAT @ 20% |
||
S65 | YN2909 |
Nut, nyloc Bracket to chassis frame |
4 | |||
S66 | WM0059 |
Washer, plain Bracket to chassis frame |
4 |
£0.55 Ex VAT @ 20% |
||
S67 | 140951 |
LOWER SPRING PAN ASSEMBLYRevington TR information: This part is no longer available new. Please order second hand part 140951SH or powder coated second hand part 140951SHPC |
2 | |||
S67A | 101961 |
Screw, retaining rebound abutment bracket |
8 | |||
S68 | HB0916 |
Bolt Spring pan assembly to lower wishbone |
8 | |||
S69 | 143712 |
Stud Spring pan assembly to lower wishbone |
8 |
£2.66 Ex VAT @ 20% |
||
S70 | YN2909 |
Nut, nyloc Spring pan assembly to lower wishbone |
12 | |||
S71 | WP0020 |
Washer, plain Spring pan assembly to lower wishbone |
12 | |||
S72 | 211648 |
FRONT ROAD SPRING (Coil) 'Short' |
2 | |||
S72A | 144910 |
Piece, packing, on top of front road springTriumph Catalogue Remarks: Fitted from Comm. No. CTC59836 to Comm. No - Note:-Packing piece 144910 to be used with road spring 211648 only. Front road spring 213165 may be used for all replacements. |
2 | |||
S72B | 213165 |
FRONT ROAD SPRING (Coil) 'Long'Triumph Catalogue Remarks: Fitted from Comm. No - and future |
2 | |||
S73 | 100751 |
Washer, rubber, both ends of springRevington TR information: Revington TR recommends using the superior Superpro Polyurethane product SPF1028K. A thicker version SPF1028-5K is available too to enable corner height adjustments to be made. We also have second hand parts 100751SH. . |
4 | |||
S74 | 107682 |
Piece, packing, between spring and abutmentRevington TR information: Consider second hand part 107682SH |
2 |
£37.37 Ex VAT @ 20% |
||
S75 | 100751 |
Washer, rubber, over packing pieceRevington TR information: Revington TR recommends using the superior Superpro Polyurethane product SPF1028K. A thicker version SPF1028-5K is available too to enable corner height adjustments to be made. We also have second hand parts 100751SH. . |
2 | |||
S76 | 139703 |
FRONT SHOCK ABSORBER |
||||
S76A | 143355 |
FRONT SHOCK ABSORBER-ADJUSTABLETriumph Catalogue Remarks: Special orders only |
2 | |||
S77 | 119450 |
Rubber, mounting LowerRevington TR information: Superpro Polyurethane offer an improved kit whic lasts much longer than rubber. Please see SPF0476K below |
2 | |||
S78 | 142444 |
Rubber, mounting Upper |
4 | |||
S79 | 140416 |
Washer Shock absorber upper attachmentRevington TR information: Flat washer 7/16" internal diameter, 1-5/8" external diameter, 0.164" thick Can use stainless steel washer WP107261572 or cupped washer TBC |
2 |
£1.55 Ex VAT @ 20% |
||
S80 | 140479 |
Washer Shock absorber upper attachmentRevington TR information: Flat washer 3/8" internal diameter, 1-5/8" external diameter, 0.150" thick Can use stainless steel washer WP106261252 or cupped washer ACA5759 |
2 |
£1.38 Ex VAT @ 20% |
||
S81 | HN2009 |
Nut Shock absorber upper attachment |
2 | |||
S82 | JN2109 |
Nut, jam Shock absorber upper attachment |
2 | |||
S83 | 106843 |
Bracket, shock absorberRevington TR information: Lower damper support plain (without tube) fitted to TR2-6. Consider second hand part 106843SH or second hand part powder coated black 106843SHPC. TR2-4 utilise a cover bracket 106844 below this part to act on the rebound... READ MORE |
4 |
£12.80 Ex VAT @ 20% |
||
S84 | HB1019 |
Bolt Shock absorber to Fulcrum brackets |
2 | |||
S85 | JN3210 |
Nut, nyloc Shock absorber to Fulcrum brackets |
2 | |||
S86 | HN2009 |
Nut Fulcrum brackets to spring pan |
8 | |||
S87 | WL0209 |
Washer, lock Fulcrum brackets to spring pan |
8 |