Fuel and braking systems
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR5 Plate H - ENGINE: METERING UNIT, INJECTORS AND INJECTOR PIPES
<< Return to Triumph Catalogue Plate ListPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
H1 | 308205 |
METERING PUMP UNIT- Push on typeTriumph Catalogue Remarks: None Air bleed type |
1 | |||
H1A | 309154 |
METERING PUMP UNIT- Push on type returnTriumph Catalogue Remarks: Fitted up to engine No. CP52533. Air bleed type (not TR5, actually TR6CP but many cars will be fitted with this MU) |
1 | |||
H1B | 312070 |
METERING PUMP UNIT- Push on type returnTriumph Catalogue Remarks: Fitted from engine No. CP52534 to CP53160. Air bleed type (not TR5, actually TR6CP but many cars will be fitted with this MU) |
1 | |||
H1C | 312097 |
METERING PUMP UNIT- Screw on type returnTriumph Catalogue Remarks: Fitted from engine No. CP53161 to CP75314. Air bleed type (not TR5, actually TR6CP but many cars will be fitted with this MU) |
1 | |||
H1D | 312529 |
METERING PUMP UNIT- Screw on type returnTriumph Catalogue Remarks: Fitted from engine No. CP75315 to CR1HE. Air bleed type (not TR5, actually TR6CP but many cars will be fitted with this MU) |
1 | |||
METERING PUMP UNIT Parts |
||||||
H1C | RTR4097 |
Control Spring Set 2 x Silver SpringsTriumph Catalogue Remarks: Non Air bleed type Metering Unit |
1 | |||
H1D | RTR4098 |
Control Spring Set 2 x Red SpringsTriumph Catalogue Remarks: Air bleed type Metering Unit (not TR5, actually TR6CP but many cars will be fitted with this MU) |
1 |
£85.96 Ex VAT @ 20% |
||
H1E | 519857 |
DIAPHRAGM - VacuumTriumph Catalogue Remarks: Between spring chamber and the Datum track chamber |
1 |
£45.58 Ex VAT @ 20% |
||
H1F | 519858 |
BEARING, SphericalRevington TR information: Swivel unit, Metering unit. This part is shown in the attached Lucas diagram as supplied with the cross pin with the swivel manufactured from Nylon. These are given to excessive wear which leads to erratic running.... READ MORE |
1 |
£61.45 Ex VAT @ 20% |
||
H1G | 519870 |
DIAPHRAGM - Seal distributor controlTriumph Catalogue Remarks: Between the metering section and the distribution section of the Metering Unit |
1 |
£61.64 Ex VAT @ 20% |
||
H1H | RTR4077 |
SEAL Bung (doughnut)Triumph Catalogue Remarks: Sealing outlet unions to sleeve |
6 |
£7.07 Ex VAT @ 20% |
||
H1I | 518630 |
BOLT BanjoTriumph Catalogue Remarks: Securing outlet pipes 2 & 5 Including Non Return Valve |
2 |
£81.06 Ex VAT @ 20% |
||
H1J | 159386 |
SEAL 'O' ringTriumph Catalogue Remarks: Outlet connection 2 & 5 (Banjo Bolt) |
4 |
£2.47 Ex VAT @ 20% |
||
H1K | 518629 |
OUTLET UNION 1,6,3,4Triumph Catalogue Remarks: Including Non Return Valve |
4 |
£131.77 Ex VAT @ 20% |
||
H1L | RTR4327 |
SEAL Dowty, outlet unions 1,6,3,4 to MU bodyTriumph Catalogue Remarks: Fitted up to Engine number CP75314 |
4 |
£3.00 Ex VAT @ 20% |
||
H1M | 159486 |
SEAL 'O' Ring, outlet unions 1,6,3,4 to MU bodyTriumph Catalogue Remarks: Fitted from to Engine number CP75315 |
4 |
£4.06 Ex VAT @ 20% |
||
H1N | 516917 |
O' Ring kit |
1 | |||
H1O | 149041 |
Clip securing Choke Cable outerTriumph Catalogue Remarks: on Metering Unit |
1 |
£2.12 Ex VAT @ 20% |
||
H2 | 149486 |
'O' Ring, pump to pedestal |
1 |
£2.94 Ex VAT @ 20% |
||
H3 | HU0707 |
Screw, set Metering pump to pedestal |
3 | |||
H4 | WL0207 |
Washer, lock Metering pump to pedestal |
3 | |||
H5 | WP0007 |
Washer, plain Metering pump to pedestal |
3 | |||
H6 | 148946 |
Elbow, rubber, control to air inlet balance tube |
1 | |||
H7 | 149595 |
Coupling, pumpRevington TR information: Coupling TR5 am=nd 6 Lucas PI metering unit to distributor pedestal. Our couplings are genuine Lucas parts, also known as a drive dog. Beware of aftermarket parts that melt in modern petrol. |
1 |
£75.07 Ex VAT @ 20% |
||
H8 | 149609 |
Hose, metering, control to inlet manifold adaptor |
1 |
£10.01 Ex VAT @ 20% |
||
H9 | 514098 |
Clip, hose attachment |
1 | |||
H10 | 149512 |
INJECTOR NOZZLE ASSEMBLY (Inlet Manifold)Revington TR information: TR5-6 Injector screw in new. It is good practice to replace the seal around the outside of the plastic ferrule when an injector is changed, order part number 149511. We can supply new injectors in matched... READ MORE |
6 |
£129.04 Ex VAT @ 20% |
||
H11 | 516922 |
Block, heat insulating c/w 'O' ring Nozzle to manifoldRevington TR information: Nylon adaptor injector to manifold, push in type. We also keep second hand parts 516922SH. See also 516922S, screw in type. Usually has the seal fitted. |
6 |
£11.95 Ex VAT @ 20% |
||
H12 | 149511 |
'O' Ring Nozzle to manifold |
6 |
£1.19 Ex VAT @ 20% |
||
H13 | 149308 |
Plate, clamping, injectors Securing injectorsRevington TR information: Standard mild steel injector retaining plate. This plate secures two injectors and is retained with a 5/16UNC screw between the two injectors. This plate is not available new in its original form. Please purchase second hand... READ MORE |
3 | |||
H14 | HU0853 |
Screw, set Securing injectors |
3 | |||
H15 | WL0208 |
Washer, plain Securing injectors |
3 | |||
INJECTOR PIPES |
||||||
H16 | 517305 |
Tube, 30¼" long No. 1 injector pipeTriumph Catalogue Remarks: Sold in yards |
1 |
£10.24 Ex VAT @ 20% |
||
H17 | 517307 |
Elbow No. 1 injector pipeRevington TR information: Elbow to all injectors plus 3&4 at the Metering Unit. Not available new, use second hand part TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set... READ MORE |
1 | |||
H18 | 517306 |
Nipple and nut No. 1 injector pipeRevington TR information: Straight Nipple and Nut, 1&6 at the Metering Unit. Not available new, use second hand part TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set out... READ MORE |
1 | |||
H19 | 517305 |
Tube, 31" long No. 2 injector pipeTriumph Catalogue Remarks: Sold in yards |
1 |
£10.24 Ex VAT @ 20% |
||
H20 | 517307 |
Elbow No. 2 injector pipeRevington TR information: Elbow to all injectors plus 3&4 at the Metering Unit. Not available new, use second hand part TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set... READ MORE |
1 | |||
H21 | 517308 |
Banjo No. 2 injector pipeRevington TR information: Banjo Union, 2&5 at the Metering Unit. Not available new. Use second hand part 517308SH TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set out below... READ MORE |
1 | |||
H22 | 517305 |
Tube, 30" long No. 3 injector pipeTriumph Catalogue Remarks: Sold in yards |
1 |
£10.24 Ex VAT @ 20% |
||
H23 | 517307 |
Elbow No. 3 injector pipeRevington TR information: Elbow to all injectors plus 3&4 at the Metering Unit. Not available new, use second hand part TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set... READ MORE |
2 | |||
H24 | 517305 |
Tube, 29⅛" long No. 4 injectorTriumph Catalogue Remarks: Sold in yards |
1 |
£10.24 Ex VAT @ 20% |
||
H25 | 517307 |
Elbow pipe No. 4 injectorRevington TR information: Elbow to all injectors plus 3&4 at the Metering Unit. Not available new, use second hand part TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set... READ MORE |
2 | |||
H26 | 517305 |
Tube, 21¾" long No. 5 injector pipeTriumph Catalogue Remarks: Sold in yards |
1 |
£10.24 Ex VAT @ 20% |
||
H27 | 517307 |
Elbow No. 5 injector pipeRevington TR information: Elbow to all injectors plus 3&4 at the Metering Unit. Not available new, use second hand part TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set... READ MORE |
1 | |||
H28 | 517308 |
Banjo No. 5 injector pipeRevington TR information: Banjo Union, 2&5 at the Metering Unit. Not available new. Use second hand part 517308SH TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set out below... READ MORE |
1 | |||
H29 | 517305 |
Tube, 20¼" long No. 6 injector pipeTriumph Catalogue Remarks: Sold in yards. |
1 |
£10.24 Ex VAT @ 20% |
||
Note:- 5 yards of Tube No. 517305 will service one engine.Triumph Catalogue Remarks: However Braided Hose set RTR4107 is a better solution |
||||||
H30 | 517307 |
Elbow No. 6 injector pipeRevington TR information: Elbow to all injectors plus 3&4 at the Metering Unit. Not available new, use second hand part TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set... READ MORE |
1 | |||
H31 | 517306 |
Nipple and nut No. 6 injector pipeRevington TR information: Straight Nipple and Nut, 1&6 at the Metering Unit. Not available new, use second hand part TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set out... READ MORE |
1 | |||
H32 | 145891 |
Clip, firtree, securing injector pipes |
3 |