Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR5 Plate M - GEARBOX: CASING, TOP COVER AND MOUNTING
<< Return to Triumph Catalogue Plate ListPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
M1AA | 516642 |
GEARBOX UNITTriumph Catalogue Remarks: (Less Gear Lever) |
1 | |||
M1BB | 517391 |
GEARBOX UNIT (Less Gear Lever)Triumph Catalogue Remarks: RECONDITIONED UNIT |
1 | |||
M1CC | 516643 |
GEARBOX UNIT-OverdriveTriumph Catalogue Remarks: (Less Gear Lever and Gearbox Extension) |
1 | |||
M1EE | 515121 |
GEARBOX GASKET SET |
1 |
£7.18 Ex VAT @ 20% |
||
M1 | 201662 |
GEARBOX AND CLUTCH HOUSING ASSEMBLY |
1 | |||
M2 | 137651 |
Bush, clutch housingRevington TR information: These bearings are narrow and give rise to excessive cross shaft wear. Consider using bronze bush RTR1204 that gives a larger support area |
2 |
£9.08 Ex VAT @ 20% |
||
M3 | 114774 |
Plug, drain, in bottom of gearboxRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
M4 | 100157 |
FRONT END COVERRevington TR information: TR2-6 Gearbox nose with 1.66" (42.61mm) diameter sliding section to accommodate standard 31.75mm (1.25") diameter input shaft and standard release carrier. Consider original second hand part number 100157SH or where necessary Triumph 2000/2500 gearbox Nose... READ MORE |
1 |
£63.24 Ex VAT @ 20% |
||
M5 | 141756 |
Seal, in front end coverRevington TR information: Gearbox nose seal TR2-6 and all similar gearboxes, T2000, T2500, Dolomite, Stage ,etc. Our seal stock is genuine Leyland new old stock, not cheap reproductions. |
1 |
£14.42 Ex VAT @ 20% |
||
M6 | 059537 |
Gasket Front end covertogearboxRevington TR information: Consider gasket kit RTR1003 |
1 |
£1.39 Ex VAT @ 20% |
||
M7 | 114034 |
Washer Front end covertogearbox |
4 | |||
M8 | WU3857 |
Screw, wedglok Front end covertogearbox |
4 | |||
M9 | 055773 |
Cover, countershaft end |
1 |
£10.01 Ex VAT @ 20% |
||
M10 | 055774 |
Gasket Countershaft end cover to gearbox |
1 |
£1.80 Ex VAT @ 20% |
||
M11 | WU3857 |
Screw, set, wedglok Countershaft end cover to gearbox |
2 | |||
M12 | 114034 |
Washer, plain Countershaft end cover to gearbox |
2 | |||
M13 | 305048 |
GEARBOX EXTENSIONRevington TR information: Gearbox extension ( none overdrive. Not available new, use 305048SH |
1 | |||
M14 | 146129 |
Seal, oil, in rear of extension |
1 |
£12.26 Ex VAT @ 20% |
||
MI5 | 132465 |
Washer, paper, extension to gearbox |
1 |
£2.42 Ex VAT @ 20% |
||
MI6 | HU0858 |
Screw, set Extension to gearbox |
5 | |||
M16A | HB0866 |
Bolt Extension to gearbox |
1 | |||
M17 | WL0208 |
Washer, lock Extension to gearbox |
6 | |||
M18 | 147965 |
Gear, speedo drivenRevington TR information: This gear is plastic, usually red in colour and has 15 teeth. TR2-4A Gearboxes without overdrive and overdrives used a brass bearing and a steel gear with 15 teeth 107747 Brass Bearing Housing 058969 Steel Gear... READ MORE |
1 |
£51.82 Ex VAT @ 20% |
||
M19 | 146540 |
Bearing, speedo |
1 | |||
M20 | 108757 |
Seal, oil |
1 |
£2.32 Ex VAT @ 20% |
||
M21 | 147751 |
'o' ring |
1 |
£1.38 Ex VAT @ 20% |
||
M22 | 146541 |
Washer |
1 | |||
M23 | 107746 |
Screw, locking Bearing to extensionRevington TR information: Special Pinch Bolt holding the speedometer drive into the gearbox casing. Not available new. Use 107746SH or modify Screw SH505121 as described in 'More About This Part'. This special bolt has an overall length of... READ MORE |
1 | |||
M24 | WL0208 |
Washer, lock Bearing to extension |
1 | |||
M5A | 516259 |
TOP COVER ASSEMBLY- Normal |
1 | |||
M25B | 516260 |
TOP COVER ASSEMBLY -OverdriveRevington TR information: Not available new please consider second hand part 516260SH |
1 | |||
M25 | 308238 |
Cover, top, complete with plugs |
1 | |||
M26 | 104449 |
Plug, interlock, side of top cover Welch plugs |
1 |
£1.90 Ex VAT @ 20% |
||
M27 | 104449 |
Plug, selector shafts Welch plugs |
3 |
£1.90 Ex VAT @ 20% |
||
M28 | 054505 |
Plug, sides of top cover Welch plugs |
2 |
£2.39 Ex VAT @ 20% |
||
M29 | 114774 |
Plug, oil filler and levelRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
M30 | 128066 |
Shaft, selector 1st and 2ndRevington TR information: Consider second hand original part 128066SH |
1 |
£21.47 Ex VAT @ 20% |
||
M31 | 129986 |
Shaft, selector 3rd and top Reverse |
1 | |||
M32 | 132389 |
Shaft, selector Reverse |
1 | |||
M33 | 127386 |
Selector 1st and 2ndRevington TR information: Selector 1st and 2nd. Not currently available new (July 2018) however we usually have second hand parts for sale |
1 | |||
M34 | 127385 |
Selector ReverseRevington TR information: Selector reverse. When not available new, order second hand part 127385SH |
1 |
£75.88 Ex VAT @ 20% |
||
M35 | 128067 |
Fork, selector 1st and 2ndRevington TR information: Fork Selector 1st and 2nd. Not available new however we usually have second hand parts for sale |
1 | |||
M36 | 127387 |
Fork, selector 3rd and topRevington TR information: Not currently available. use second hand part 127387SH |
1 | |||
M37 | 129780 |
Actuator, reverse |
1 |
£15.19 Ex VAT @ 20% |
||
M38 | 129779 |
Sleeve, reverse shaftRevington TR information: Tube on reverse shaft 50.4mm long. Our stock is genuine Leyland Three tubes are used on the selector shafts of TR4-6 gearboxes 128063 on 1st and 2nd shaft 74.6mm long 117811 on 3rd and 4th shaft 82.2mm long 129779 on reverse shaft... READ MORE |
1 |
£2.29 Ex VAT @ 20% |
||
M39 | 128063 |
Sleeve, 1st and 2nd shaftRevington TR information: Tube on 1st and 2nd shaft 74.6mm long Three tubes are used on the selector shafts of TR4-6 gearboxes 128063 on 1st and 2nd shaft 74.6mm long 117811 on 3rd and 4th shaft 82.2mm long 129779 on reverse shaft 50.4mm long |
1 | |||
M40 | 117811 |
Sleeve, 3rd and top shaftRevington TR information: steel tube 3/4th speed change shaft TR4-6 gearbox top cover Three tubes are used on the selector shafts of TR4-6 gearboxes 128063 on 1st and 2nd shaft 74.6mm long 117811 on 3rd and 4th shaft 82.2mm long 129779 on reverse shaft 50.4mm... READ MORE |
1 |
£9.53 Ex VAT @ 20% |
||
M41 | 122653 |
Screw, taper, securing selectors and forks to shaft |
5 |
£7.14 Ex VAT @ 20% |
||
M42 | 106050 |
Ring, sealing, selector shaft |
3 |
£1.26 Ex VAT @ 20% |
||
M43 | 106051 |
Plate, cover, over sealing ring |
1 |
£7.94 Ex VAT @ 20% |
||
M44 | HU0704 |
Screw, set Cover plate to top cover |
2 | |||
M45 | WL0207 |
Washer, lock Cover plate to top cover |
2 | |||
M46 | 105788 |
Roller, interlock Fitted in top cover |
1 |
£4.58 Ex VAT @ 20% |
||
M47 | BL0024 |
Ball, interlock Fitted in top cover |
2 | |||
M48 | BL0024 |
Ball, selector shaft, 1st and 2nd gear |
1 | |||
M49 | 101236 |
Spring, ball |
1 | |||
M50 | 106481 |
Plunger, selector shaft, 3rd and top |
1 |
£17.56 Ex VAT @ 20% |
||
M51 | 106489 |
Spring, plunger |
1 |
£1.04 Ex VAT @ 20% |
||
M52 | 109401 |
Piece, distance, plungerRevington TR information: No longer available, use second hand part 109401SH |
1 | |||
M53 | 136990 |
Plunger, reverse selector |
1 |
£3.06 Ex VAT @ 20% |
||
M53A | 106489 |
Spring, reverse plunger |
1 |
£1.04 Ex VAT @ 20% |
||
M53B | 109401 |
Piece, distance, selector shaft plunger- reverseRevington TR information: No longer available, use second hand part 109401SH |
1 | |||
M54 | 108166 |
Plug, retaining springRevington TR information: No longer available, we can however supply second hand parts 108166SH |
3 | |||
M55 | 105758 |
Washer, joint, top cover |
1 |
£1.73 Ex VAT @ 20% |
||
M56 | HB0873 |
Bolt Top cover to casing |
2 |
£0.95 Ex VAT @ 20% |
||
M57 | HB0871 |
Bolt Top cover to casing |
2 | |||
M58 | 056370 |
Screw, set Top cover to casting |
4 |
£3.80 Ex VAT @ 20% |
||
M59 | WL0208 |
Washer, lock Top cover to casing |
8 | |||
M60 | 148095 |
CHANGE SPEED LEVER ASSEMBLYRevington TR information: Not available new, consider second hand part 148095SH. There are 4 basic types of gear lever fitted to TR2-6, which are all interchangeable, provided the correct top cover and fixings are used. TR2-3B Part number 112447.... READ MORE |
1 | |||
M61 | 112424 |
Plunger In ball end |
1 |
£5.98 Ex VAT @ 20% |
||
M62 | 137988 |
Spring In ball end |
1 | |||
M63 | 145796 |
Spring Fitted under capRevington TR information: Spring gear lever, TR2-6CC/CP. Whilst this spring is unavailable, consider original second hand part number 145796SH. This spring had 6 coils and has an internal diameter of 16mm where the spring fits over the gear lever.... READ MORE |
1 | |||
M64 | 112442 |
Retainer, spring Fitted under capRevington TR information: No longer vailable, use second hand part 112442SH |
1 | |||
M65 | 131246 |
Knob, gear leverRevington TR information: Fitted up to CP53853 and now available new. This knob is a plain black sphere with no logo. Consider second hand part 131246SH or you can use part number 144095 but reverse is on the left... READ MORE |
1 |
£48.46 Ex VAT @ 20% |
||
M66 | 506157 |
Nut, jam -for knob |
1 | |||
M67 | 140816 |
Cap, change speed leverRevington TR information: Not available new use second hand part 140816SH. |
1 | |||
M68 | HU0703 |
Screw, set Cap to top cover |
1 | |||
M69 | WL0207 |
Washer, lock Cap to top cover |
1 | |||
M70 | 141984 |
Pin, locating Gear lever to top coverRevington TR information: consider second hand part 141984SH |
2 | |||
M71 | JN2108 |
Nut, jam Gear lever to top cover |
2 | |||
M71A | 709329 |
GEARBOX Grommet, lower -Gear leverRevington TR information: Upper grommet is linked below. |
1 |
£17.30 Ex VAT @ 20% |
||
M71B | 622381 |
Gauntlet, gear lever-Complete assembly (incorporating Part No. 709328 grommet upper)Triumph Catalogue Remarks: Black |
1 | |||
GEARBOX ATTACHMENT DETAILS |
||||||
M71C | HB0811 |
Bolt Gearbox to engine attachment |
8 | |||
M71D | WL0208 |
Washer, lock Gearbox to engine attachment |
8 | |||
M71E | HN2008 |
Nut Gearbox to engine attachment |
8 | |||
M71F | HN2008 |
Nut Gearbox to engine attachment |
3 | |||
M71G | WL0208 |
Washer, lock Gearbox to engine attachment |
3 | |||
M72 | 104086 |
REAR ENGINE MOUNTINGRevington TR information: This standard Mounting supporting the gearbox or overdrive is made with 55/60 shore hardness rubber. For competition or where significantly extra torque than standard is likely to be applied to the engine mountings use uprated part... READ MORE |
1 |
£21.62 Ex VAT @ 20% |
||
M73 | HB1112 |
Bolt Engine mounting to gearbox extension |
2 | |||
M74 | HN2011 |
Nut Engine mounting to gearbox extension |
1 | |||
M75 | WL0211 |
Washer, lock Engine mounting to gearbox extension |
2 | |||
M76 | HN2010 |
Nut Engine mounting to crossmember |
2 | |||
M77 | WL0210 |
Washer, lock Engine mounting to crossmember |
2 | |||
M78 | WP0010 |
Washer, plain Engine mounting to crossmember |
2 |