Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR5 Plate R - INDEPENDENT REAR AXLE: DIFFERENTIAL UNIT, REAR AXLE SHAFTS AND HUB UNITS
<< Return to Triumph Catalogue Plate ListPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
R1AA | 517082 |
REAR AXLE CENTRE ASSEMBLY(3.45 -1 Ratio)Revington TR information: 3.45:1 ratio. As new axles are not available, use reconditioned unit part number 517393, or second hand part 313130SH. |
1 | |||
R1AB | 517393 |
REAR AXLE CENTRE ASSEMBLY (3.45 - 1 Ratio) RECONDITIONED UNITRevington TR information: TR5, TR6CP and CR 3.34:1 ratio Centre Rear Axle Differential Exchange Reconditioned unit. These reconditioned units include a good second hand crown wheel and pinion (CWP) and planet gears. Bearings and shims are replaced as necessary.... READ MORE |
1 |
£1373.89 Ex VAT @ 20% |
||
R1 | 149826 |
Cover assembly-RearRevington TR information: Not available new. Please ask for a price for a second hand part |
1 | |||
R2 | 118826 |
Plug, core, breather hole |
1 | |||
R3 | 510408 |
Pin, cotter, breather |
1 | |||
R4 | 147783 |
Rubber, mounting, assembly, controlled reboundTriumph Catalogue Remarks: On axle mounting bracket |
2 |
£26.40 Ex VAT @ 20% |
||
R5 | HB0811 |
Bolt Mounting rubber to axle mounting bracket |
4 | |||
R6 | TN3208 |
Nut, nyloc Mounting rubber to axle mounting bracket |
4 | |||
R7 | WM0058 |
Washer Mounting rubber to axle mounting bracket |
4 |
£0.14 Ex VAT @ 20% |
||
R8 | 211793 |
Plate assembly, axle mountingRevington TR information: Consider second hand part 211793SH or reinforced second hand part 211793EX. |
1 |
£327.08 Ex VAT @ 20% |
||
R9 | 140007 |
Washer, distance, axle mounting plate |
1 | |||
R10 | 132856 |
Bolt Mouinting plate to hypoid housing |
4 |
£10.80 Ex VAT @ 20% |
||
R11 | WN0710 |
Washer, shakeproof Mouinting plate to hypoid housing |
4 | |||
R12 | 305815 |
Housing assembly, hypoid |
1 | |||
R13 | 140419 |
Dowel, locating rear cover |
2 |
£0.64 Ex VAT @ 20% |
||
R13A | Not serviced |
Cap, bearing |
||||
R14 | 100878 |
Screw, set Bearing caps to hypoid housing |
4 | |||
R15 | WL0209 |
Washer, lock Bearing caps to hypoid housing |
4 | |||
R16 | 114774 |
Plug, oil levelRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
R17 | 302155 |
Case, differentialRevington TR information: TR3-6 Girling only diff Carrier which uses thick 153385 planet gears and accommodates TR3-4A Girling half shafts and TR5-6 independent side shafts. Not available new use Second Hand part 302155SH or complete carrier with second hand... READ MORE |
1 | |||
R18 | 110515 |
Bearing, differential casing to hypoid housing |
2 |
£62.52 Ex VAT @ 20% |
||
R19 | 100894 |
Shim, adjusting differential bearing .003"Triumph Catalogue Remarks: A/R |
£3.11 Ex VAT @ 20% |
|||
R19 | 100895 |
Shim, adjusting differential bearing .005"Triumph Catalogue Remarks: A/R |
||||
R19 | 100896 |
Shim, adjusting differential bearing .010"Triumph Catalogue Remarks: A/R |
£1.63 Ex VAT @ 20% |
|||
R20 | 516398 |
Crown wheel and pinion assembly 3.45 : 1 ratioRevington TR information: CWP 3.45:1 ratio TR5-6. This crown wheel and pinion set is suitable for TR2-6. When used with the appropriate bearings, it will fit TR2-4A live axle and TR4AIRS-6 differential unit. |
1 |
£473.26 Ex VAT @ 20% |
||
R20A | 502127 |
Crown wheel and pinion assembly 3.7 : 1 ratioRevington TR information: CWP 3.7:1 ratio TR2-4. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
1 |
£529.28 Ex VAT @ 20% |
||
R20B | 505014 |
Crown wheel and pinion assembly 4.1 : I ratioTriumph Catalogue Remarks: Alternative fitment for competition purposes |
1 |
£403.88 Ex VAT @ 20% |
||
R20C | 503924 |
Crown wheel and pinion assembly 4.55 : 1 ratioTriumph Catalogue Remarks: Alternative fitment for competition purposes |
1 | |||
R20D | 502523 |
Crown wheel and pinion assembly 4.3 :1 ratioTriumph Catalogue Remarks: Alternative fitment for competition purposes |
1 |
£471.30 Ex VAT @ 20% |
||
R20E | 515709 |
Crown wheel and pinion assembly 4.875 :1 ratioTriumph Catalogue Remarks: Alternative fitment for competition purposes |
1 | |||
R21 | 110737 |
Bolt Crown wheel to differential case |
10 |
£2.12 Ex VAT @ 20% |
||
R22 | 118977 |
Washer, lock Crown wheel to differential case |
10 | |||
R23 | 113187 |
Gear, side, differential-16 teeth |
2 | |||
R24 | 102801 |
Washer, thrust, differential side gear |
2 |
£4.22 Ex VAT @ 20% |
||
R25 | 113188 |
Pinion, differential-10 teethRevington TR information: All TR s from Girling TR3-TR6 use pinion gear 113188 The Differential fitted to TR2 8, Dolomite 2.5PI etc. use a common arrangement of thrust washers in conjunction with pinion gears. A complete range of thicknesses... READ MORE |
2 | |||
R26 | 056793 |
Washer, thrust, differential pinion .465"/.495"Revington TR information: Thrust Washer 0.048" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
A/R |
£10.14 Ex VAT @ 20% |
||
R26 | 139951 |
Washer, thrust, differential pinion .057"/.059"Revington TR information: Thrust washer 0.052" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
A/R |
£9.07 Ex VAT @ 20% |
||
R26 | 139952 |
Washer, thrust, differential pinion .061"//063"Revington TR information: Thrust Washer 0.056" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
A/R |
£8.70 Ex VAT @ 20% |
||
R26 | 139953 |
Washer, thrust, differential pinion .065"/.067"Revington TR information: Thrust Washer 0.060" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
A/R |
£11.57 Ex VAT @ 20% |
||
R26 | 139954 |
Washer, thrust, differential pinion .069"/.071"Revington TR information: Thrust Washer 0.064" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
A/R |
£15.88 Ex VAT @ 20% |
||
R26 | 139955 |
Washer, thrust, differential pinion .073"/.075"Revington TR information: Thrust Washer 0.068" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
A/R |
£7.60 Ex VAT @ 20% |
||
R26 | 139956 |
Washer, thrust, differential pinion .077"/.079"Revington TR information: Thrust Washer 0.072" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
A/R |
£7.60 Ex VAT @ 20% |
||
R27 | 100844 |
Pin, cross, differential |
1 |
£43.52 Ex VAT @ 20% |
||
R28 | 111215 |
Pin, locating cross pin in differential casingRevington TR information: not available new, use second hand part 111215SH |
1 |
£9.07 Ex VAT @ 20% |
||
R29 | 100897 |
Bearing, taper roller, pinion head |
1 | |||
REAR AXLE CENTRE ASSEMBLY -cont. |
||||||
R30 | 100965 |
Shim, adjusting pinion head bearing .003" |
£4.08 Ex VAT @ 20% |
|||
R30 | 100966 |
Shim, adjusting pinion head bearing. 005" |
A/R |
£1.49 Ex VAT @ 20% |
||
R30 | 100967 |
Shim, adjusting pinion head bearing .010" |
£1.72 Ex VAT @ 20% |
|||
R31 | 100846 |
Spacer, between bearings |
1 |
£19.32 Ex VAT @ 20% |
||
R32 | 100422 |
Bearing, roller, pinion shank |
1 |
£54.68 Ex VAT @ 20% |
||
R33 | 100562 |
Shim, adjusting pinion shank bearing .003"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375"... READ MORE |
£2.14 Ex VAT @ 20% |
|||
R33 | 100563 |
Shim, adjusting pinion shank bearing .005"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375" external diameter. 140793... READ MORE |
AIR |
£2.86 Ex VAT @ 20% |
||
R33 | 100564 |
Shim, adjusting pinion shank bearing .010"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375" external diameter. 140793... READ MORE |
£1.84 Ex VAT @ 20% |
|||
R34 | 140337 |
Seal, oil, pinionRevington TR information: TR4A-6. Independent axle nose seal. Not shown in late TR6 parts book. The Original Triumph TR4A parts catalogue does not list the Axle Pinion Seal correctly in so far as seal 140337 is listed for both... READ MORE |
1 |
£12.88 Ex VAT @ 20% |
||
R35 | 138105 |
Flange, pinionRevington TR information: Round Differential input flange, TR4A (both Live axle and IRS) to TR6 CP52867/CC61570. Consider original second hand part 138105SH. |
1 |
£84.07 Ex VAT @ 20% |
||
R36 | 115990 |
Washer Flange to pinion |
1 | |||
R37 | 112635 |
Nut, slotted Flange to pinionRevington TR information: This slotterd nut is used to secure TR2-4 and 4A-5 diferential pinnions. When a nyloc nut is required use NY610163 |
1 |
£11.96 Ex VAT @ 20% |
||
R38 | 514773 |
Wire, soft iron, 14G x 4" Flange to pinion |
A/R | |||
R39 | 134480 |
Washer, joint Hypoid housing to rear cover |
1 |
£2.23 Ex VAT @ 20% |
||
R40 | HU0808 |
Screw, set Hypoid housing to rear cover |
8 | |||
R41 | WL0208 |
Washer, lock Hypoid housing to rear cover |
8 | |||
R42 | 134235 |
Mounting, rubber Upper, frontRevington TR information: These bushes are very soft and can allow too much axle movement. We recommend using the following Superpro polyurethane bush kits: - SPF0138AVK TR4A IRS: Road use. SPF0138AK TR4A IRS: Fast Road and Rally use. SPF0138A-90K... READ MORE |
2 |
£4.75 Ex VAT @ 20% |
||
R43 | 134236 |
Mounting, rubber Lower, frontRevington TR information: These bushes are very soft and can allow too much axle movement. We recommend using the following Superpro polyurethane bush kits: - SPF0138AVK TR4A IRS: Road use. SPF0138AK TR4A IRS: Fast Road and Rally use. SPF0138A-90K... READ MORE |
2 |
£3.48 Ex VAT @ 20% |
||
R44 | 134234 |
Washer, special Rear axle centre |
4 |
£6.26 Ex VAT @ 20% |
||
R45 | TN3209 |
Nut, nyloc Rear axle centre |
4 | |||
R46 | 149379 |
AXLE SHAFT INNER R.H.Revington TR information: RH Axle Shaft for TR4A-6 differentials. This is the short shaft 157mm long including the thread. Not available new. Use second hand part 149379SH. |
1 | |||
R47 | 149378 |
AXLE SHAFT INNER L.HRevington TR information: LH Axle Shaft for TR4A-6 differentials. This is the long shaft, 178mm long including the thread. Whilst we have new parts available we also keep second hand part 149378SH. |
1 | |||
R48 | 134465 |
Bearing, ball, axle shaft |
2 |
£26.95 Ex VAT @ 20% |
||
R49 | 128638 |
Housing, oil seal |
2 |
£26.92 Ex VAT @ 20% |
||
R50 | HU0806 |
Screw, set Housing to hypoid housing |
8 | |||
R51 | WL0208 |
Washer, lock Housing to hypoid housing |
8 | |||
R52 | 138523 |
Seal, oil |
2 |
£6.49 Ex VAT @ 20% |
||
R53 | 149409 |
Flange assembly, driving, innerRevington TR information: Drive Flange differential TR5-6. This drive flange whilst available new, is also available second hand. Be aware that this part is not the same as the earlier flange 138726 as the keyway is wider on the... READ MORE |
2 |
£74.87 Ex VAT @ 20% |
||
R54 | 134450 |
Stoneguard |
2 | |||
R55 | 143280 |
Key Inner driving flange to inner axle shaft |
2 |
£14.59 Ex VAT @ 20% |
||
R56 | 139043 |
Washer, plain Inner driving flange to inner axle shaft |
2 | |||
R57 | 138563 |
Nut, nyloc Inner driving flange to inner axle shaft |
2 |
£21.46 Ex VAT @ 20% |
||
R57B | 212293 |
OUTER AXLE SHAFT ASSEMBLY (comprising items R58 to R67 inclusive)Revington TR information: Triumph sold the TR4A drive shafts as a complete assembly including all parts from the hub to the flange connected to the differential unit. Today we sell the drive shafts separately from the hub. See Drive... READ MORE |
2 | |||
R57C | 145085 |
SLEEVE YOKE AND YOKE SHAFT ASSEMBLY (comprising items R60, R64, R65, R66 and R67) |
2 | |||
R58 | 137478 |
Shaft, axle outer |
2 | |||
R59 | 211137 |
Flange, yokeRevington TR information: TR4A-6 drive flange for standard drive shafts. |
2 |
£110.80 Ex VAT @ 20% |
||
R60 | 140749 |
Joint, slip, assembly |
2 | |||
R61 | 213844 |
Boot, P.V.C., inner axle shaftRevington TR information: Consider original second hand part number 213844SH. . |
2 |
£12.58 Ex VAT @ 20% |
||
R62 | 144859 |
Joint, universal-Flange end and hub end |
4 | |||
R63 | 144825 |
Nipple, grease |
4 | |||
R64 | 142437 |
Shaft, sliding halfRevington TR information: No longer available in this form as a standard part. TR's 4A IRS, 250, 5 and 6 can exhibit a tendency for the rear end to do a single twitch, both left and right, on the... READ MORE |
2 |
£134.88 Ex VAT @ 20% |
||
OUTER AXLE SHAFT ASSEMBLY-cont. |
||||||
R65 | 140753 |
Boot, rubber |
2 |
£9.12 Ex VAT @ 20% |
||
R66 | 140606 |
Clip, boot Large |
2 | |||
R67 | 140607 |
Clip, boot Small |
2 | |||
R68 | 107960 |
Bolt Outer axle shaft assembly to inner driving flangeRevington TR information: This bolt is used for other applications but primarily the propshaft. Also used in the axle. |
8 |
£4.25 Ex VAT @ 20% |
||
R69 | TN3209 |
Nut, nyloc Outer axle shaft assembly to inner driving flange |
8 | |||
R70 | 137496 |
Housing, rear hubRevington TR information: This part is a bare hub bearing housing only. Consider also second hand part 137496SH. If you are looking for a complete hub assembly with the flange and central shaft with the universal joint yoke, these... READ MORE |
2 |
£204.70 Ex VAT @ 20% |
||
R71 | YN2908 |
Nut, nyloc, hub housing and brake back plate to trailing arm |
12 | |||
R72 | 138089 |
Seal, oil, inner |
2 | |||
R73 | 132066 |
Bearing, inner |
2 | |||
R74 | 138272 |
Spacer, collapsible, bearings |
2 |
£2.78 Ex VAT @ 20% |
||
R75 | 134589 |
Bearing, outer |
2 | |||
R76 | 138090 |
Seal, oil, outer |
2 | |||
R77 | 134584 |
Adjuster |
2 | |||
R78 | 137497 |
Stoneguard |
2 |
£8.71 Ex VAT @ 20% |
||
R79 | 138861 |
Nut, adjusting |
2 |
£16.08 Ex VAT @ 20% |
||
R80 | 134585 |
Nut, lock |
2 |
£9.55 Ex VAT @ 20% |
||
R81 | 139057 |
Washer, tab |
2 |
£5.09 Ex VAT @ 20% |
||
R82 | 210979 |
DRIVING FLANGE AND HUB ASSEMBLYTriumph Catalogue Remarks: Disc wheels only |
2 |
£172.48 Ex VAT @ 20% |
||
R83 | 132317 |
Stud, wheelTriumph Catalogue Remarks: Disc wheels only |
8 |
£6.11 Ex VAT @ 20% |
||
R83A | 212403 |
DRIVING FLANGE AND HUB ASSEMBLYTriumph Catalogue Remarks: Wire wheels only |
2 |
£273.07 Ex VAT @ 20% |
||
R83B | 142799 |
Stud, wheelTriumph Catalogue Remarks: Wire wheels only |
8 |
£7.43 Ex VAT @ 20% |
||
R83C | 202446 |
Extension, hub R.H.Triumph Catalogue Remarks: Wire wheels only |
1 | |||
R83D | 202447 |
Extension, hub L.H.Triumph Catalogue Remarks: Wire wheels only |
1 | |||
R83E | 110366 |
Nut, extension to hubTriumph Catalogue Remarks: Wire wheels only |
8 |
£2.66 Ex VAT @ 20% |
||
R84 | 134591 |
Key, driving flange Driving flange to outer axle shaft |
2 |
£5.41 Ex VAT @ 20% |
||
R85 | WM0063 |
Washer, plain Driving flange to outer axle shaft |
2 |
£2.05 Ex VAT @ 20% |
||
R86 | 138563 |
Nut, nyloc Driving flange to outer axle shaft |
2 |
£21.46 Ex VAT @ 20% |