Fuel and braking systems
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR6 CP Plate V - ENGINE (Petrol Injection Model): Metering Unit and Injectors
<< Return to Triumph Catalogue Plate ListAlso in this listing
Metering Pump Unit, Control Assembly, Metering Distribution Assembly, Connection Kit, Injector Nozzle Assembly, Injector PipesPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
V1 | 309154 |
METERING PUMP UNIT- Push on typeTriumph Catalogue Remarks: Fitted up to Engine No. CP52533 |
1 | |||
V1A | 312070 |
METERING PUMP UNIT- Push on typeTriumph Catalogue Remarks: Fitted from Engine No. CP52534 up to CP53160 |
1 | |||
V1B | 312097 |
METERING PUMP UNIT- Push on typeTriumph Catalogue Remarks: Fitted from Engine No. CP53161 up to CP75314 |
1 | |||
V1C | 312529 |
METERING PUMP UNIT- Screw on type returnTriumph Catalogue Remarks: Fitted from Engine No. CP75315 up to end of CP production |
1 | |||
V1D | RKC0094 |
METERING PUMP UNIT- Screw on type returnTriumph Catalogue Remarks: Export market only. Fitted from Engine No. CR1 HE (1973).control cap sometimes green |
1 | |||
V1E | RKC0220 |
METERING PUMP UNIT- Screw on type returnTriumph Catalogue Remarks: Home market only. Fitted from Engine No. CR1 HE (1973).control cap sometimes green |
1 | |||
V1F | RKC0095 |
METERING PUMP UNIT (High Altitude)Triumph Catalogue Remarks: Fitted from Engine No. CR1 HE (1973) Identified by a double ended control assembly |
1 | |||
METERING PUMP UNIT Parts |
||||||
V1G | RTR4098 |
Control Spring Set 2 x Red SpringsTriumph Catalogue Remarks: Air bleed type Metering Unit TR6CP |
1 |
£85.96 Ex VAT @ 20% |
||
V1H | RTR4099 |
Control Spring Set 3 x Black SpringsTriumph Catalogue Remarks: Air bleed type Metering Unit TR6CR + 2.5PI MkII 124BHP |
1 |
£73.96 Ex VAT @ 20% |
||
V1I | 519907 |
CONTROL ASSEMBLY |
1 | |||
V1J | 519854 |
SCREW assembly, control |
1 | |||
V1K | 519856 |
SPRING, calibration, inner and outer |
1 | |||
V1L | 519857 |
DIAPHRAGM - VacuumTriumph Catalogue Remarks: Between spring chamber and the Datum track chamber |
1 |
£45.58 Ex VAT @ 20% |
||
V1M | 519858 |
BEARING, sphericalRevington TR information: Swivel unit, Metering unit. This part is shown in the attached Lucas diagram as supplied with the cross pin with the swivel manufactured from Nylon. These are given to excessive wear which leads to erratic running.... READ MORE |
1 |
£61.45 Ex VAT @ 20% |
||
V1N | 519859 |
SCREW, full load stroke |
1 | |||
V1O | 519860 |
SCREW, cam follower |
1 | |||
V1P | 519861 |
SHAFT AND ARM, pivot |
1 | |||
V1Q | 519863 |
SPRING, set, control arm |
1 | |||
V1R | 519864 |
SPRING, over fuel lever |
1 | |||
V1S | 519865 |
CAM, follower |
1 | |||
V1T | 519866 |
DATUM track |
1 |
£39.59 Ex VAT @ 20% |
||
V1U | 519867 |
LINKAGE |
1 |
£77.06 Ex VAT @ 20% |
||
V1V | 519869 |
SPRING, cam follower |
1 | |||
V1W | 519870 |
SEAL, distributor controlTriumph Catalogue Remarks: Between the metering section and the distribution section of the Metering Unit |
1 |
£61.64 Ex VAT @ 20% |
||
V1X | 519871 |
SUNDRY PARTS KITRevington TR information: Call for availability |
1 | |||
V1Y | 519908 |
METERING DISTRIBUTION ASSEMBLY |
1 |
£235.04 Ex VAT @ 20% |
||
V1Z | RTR4077 |
SEAL Bung (doughnut)Triumph Catalogue Remarks: Sealing outlet unions to sleeve |
6 |
£7.07 Ex VAT @ 20% |
||
V1AA | 518631 |
CONNECTION, inletTriumph Catalogue Remarks: Fitted up to Engine No. CP75314 |
1 | |||
V1AB | 521028 |
CONNECTION KIT, inletTriumph Catalogue Remarks: Fitted from Engine No. CP75315 |
1 |
£23.50 Ex VAT @ 20% |
||
V1AC | 159489 |
'O' RING, inlet connectionTriumph Catalogue Remarks: Fitted from Engine No. CP75315 |
1 |
£2.63 Ex VAT @ 20% |
||
V1AD | 519872 |
STRAINER inletRevington TR information: These are not new but ultrasonically cleaned second hand parts. We also have 'as used' second hand parts 519872SH We keep exchange PRV's, a completely new PRV system (RTR4456K) which eliminates resonance, new washers and the... READ MORE |
1 | |||
V1AE | 518630 |
BOLT, banjoTriumph Catalogue Remarks: Securing outlet pipes 2 & 5 Including Non Return Valve |
2 |
£81.06 Ex VAT @ 20% |
||
V1AF | 159386 |
SEAL 'O' ringTriumph Catalogue Remarks: Outlet connection 2 & 5 (Banjo Bolt) |
4 |
£2.47 Ex VAT @ 20% |
||
V1AG | 517308 |
BANJO, firtreeRevington TR information: Banjo Union, 2&5 at the Metering Unit. Not available new. Use second hand part 517308SH TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set out below... READ MORE |
1 | |||
V1AH | 518629 |
CONNECTION, outletTriumph Catalogue Remarks: Fitted up to Engine No. CP75314 |
4 |
£131.77 Ex VAT @ 20% |
||
V1AI | 521029 |
CONNECTION KIT, outletTriumph Catalogue Remarks: Fitted from Engine No. CP75315 |
1 | |||
V1AJ | RTR4327 |
SEAL Dowty, outlet unions 1,6,3,4 to MU bodyTriumph Catalogue Remarks: Fitted up to Engine number CP75314 |
4 |
£3.00 Ex VAT @ 20% |
||
V1AK | 159486 |
SEAL 'O' Ring, outlet unions 1,6,3,4 to MU bodyTriumph Catalogue Remarks: Fitted from to Engine number CP75315 |
4 |
£4.06 Ex VAT @ 20% |
||
V1AL | 516917 |
'O' RING KIT |
1 | |||
V1AM | 519873 |
ROTOR AND SLEEVE |
1 |
£167.40 Ex VAT @ 20% |
||
V1AN | 519874 |
SCREW, cap |
1 | |||
V1AO | 519875 |
SCREW, countersunk |
1 | |||
V1AP | 149595 |
COUPLING, driveRevington TR information: Coupling TR5 am=nd 6 Lucas PI metering unit to distributor pedestal. Our couplings are genuine Lucas parts, also known as a drive dog. Beware of aftermarket parts that melt in modern petrol. |
1 |
£75.07 Ex VAT @ 20% |
||
V1AQ | 518495 |
WASHER, outlet sealingTriumph Catalogue Remarks: Fitted up to Engine No. CP75314 |
1 | |||
V1AR | 518496 |
WASHER, inlet sealingTriumph Catalogue Remarks: Fitted up to Engine No. CP75314 |
1 | |||
V1AS | 149041 |
CLIP securing choke cable outer |
1 |
£2.12 Ex VAT @ 20% |
||
V2 | 149486 |
'O'RING, pump to pedestal |
1 |
£2.94 Ex VAT @ 20% |
||
V3 | HU0707 |
SCREW, set - Metering pump to pedestal |
3 | |||
V4 | WL0207 |
WASHER, lock - Metering pump to pedestal |
3 | |||
V5 | WP0007 |
WASHER, plain - Metering pump to pedestal |
3 | |||
V6 | 148946 |
ELBOW, rubber, control to air inlet balance tube |
1 | |||
V7 | 149595 |
COUPLING, pumpRevington TR information: Coupling TR5 am=nd 6 Lucas PI metering unit to distributor pedestal. Our couplings are genuine Lucas parts, also known as a drive dog. Beware of aftermarket parts that melt in modern petrol. |
1 |
£75.07 Ex VAT @ 20% |
||
V8 | 149609 |
HOSE, metering, control to inlet manifold adaptor |
1 |
£10.01 Ex VAT @ 20% |
||
V9 | 514048 |
CLIP, hose attachment to rocker cover rear stud |
1 | |||
V9A | 157178 |
SHIM, 0.002" - metering pump unitTriumph Catalogue Remarks: Fitted from Engine No. ............ |
A/R | |||
V10 | 149512 |
INJECTOR NOZZLE ASSEMBLY (Inlet Manifold)Triumph Catalogue Remarks: SCREW IN Fitted up to Engine No. ............ |
6 |
£129.04 Ex VAT @ 20% |
||
V10A | 157913 |
INJECTOR NOZZLE ASSEMBLY (Inlet Manifold)Triumph Catalogue Remarks: PUSH IN Fitted from Engine No. ............ |
6 |
£173.64 Ex VAT @ 20% |
||
V11 | 516922 |
BLOCK, heat insulating c/w `0' ring - Nozzle toRevington TR information: Nylon adaptor injector to manifold, push in type. We also keep second hand parts 516922SH. See also 516922S, screw in type. Usually has the seal fitted. |
6 |
£11.95 Ex VAT @ 20% |
||
V12 | 149511 |
'O' RING - Nozzle to manifold |
6 |
£1.19 Ex VAT @ 20% |
||
V13 | 149308 |
PLATE clamping injectors - Securing injectorsRevington TR information: Standard mild steel injector retaining plate. This plate secures two injectors and is retained with a 5/16UNC screw between the two injectors. This plate is not available new in its original form. Please purchase second hand... READ MORE |
3 | |||
V14 | HU0853 |
SCREW, set - Securing injectors |
3 | |||
V15 | WL0208 |
WASHER, plain - Securing injectors |
3 | |||
INJECTOR PIPES |
||||||
V16 | 149566 |
PIPE ASSEMBLY, No. 1Triumph Catalogue Remarks: Fitted up to Engine No. CR1 HE |
1 | |||
V16A | UKC0351 |
PIPE ASSEMBLY, No. 1Triumph Catalogue Remarks: Fitted from Engine No. CR1 HE |
1 | |||
V16B | 517305 |
TUBE, 30 1/4" long - No. 1 injector pipeTriumph Catalogue Remarks: Sold in yards |
1 |
£10.24 Ex VAT @ 20% |
||
V17 | 517307 |
ELBOW - No. 1 injector pipeRevington TR information: Elbow to all injectors plus 3&4 at the Metering Unit. Not available new, use second hand part TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set... READ MORE |
1 | |||
V18 | 517306 |
NIPPLE AND NUT - No. 1 injector pipeRevington TR information: Straight Nipple and Nut, 1&6 at the Metering Unit. Not available new, use second hand part TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set out... READ MORE |
1 | |||
V19 | 149586 |
PIPE ASSEMBLY, No. 2Triumph Catalogue Remarks: Fitted up to Engine No. CR1 HE |
1 | |||
V19A | UKC0361 |
PIPE ASSEMBLY, No. 2Triumph Catalogue Remarks: Fitted from Engine No. CR1 HE |
1 | |||
V19B | 517305 |
TUBE, 31" long - No. 2 injector pipeTriumph Catalogue Remarks: Sold in yards |
1 |
£10.24 Ex VAT @ 20% |
||
V20 | 517307 |
ELBOW - No. 2 injector pipeRevington TR information: Elbow to all injectors plus 3&4 at the Metering Unit. Not available new, use second hand part TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set... READ MORE |
1 | |||
V21 | 517308 |
BANJO - No. 2 injector pipeRevington TR information: Banjo Union, 2&5 at the Metering Unit. Not available new. Use second hand part 517308SH TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set out below... READ MORE |
1 | |||
V22 | 149576 |
PIPE ASSEMBLY, No. 3Triumph Catalogue Remarks: Fitted up to Engine No. CR1 HE |
1 | |||
V22A | UKC0371 |
PIPE ASSEMBLY, No. 3Triumph Catalogue Remarks: Fitted from Engine No. CR1 HE |
1 | |||
V22B | 517305 |
TUBE, 30" long - No. 3 injector pipeTriumph Catalogue Remarks: Sold in yards |
1 |
£10.24 Ex VAT @ 20% |
||
V23C | 517307 |
ELBOW - No. 3 injector pipeRevington TR information: Elbow to all injectors plus 3&4 at the Metering Unit. Not available new, use second hand part TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set... READ MORE |
2 | |||
V24 | 149575 |
PIPE ASSEMBLY, No. 4Triumph Catalogue Remarks: Fitted up to Engine No. CR1 HE |
1 | |||
V24A | UKC0372 |
PIPE ASSEMBLY, No. 4Triumph Catalogue Remarks: Fitted from Engine No. CR1 HE |
1 | |||
V24B | 517305 |
TUBE, 29 1/8" long - No. 4 injector pipeTriumph Catalogue Remarks: Sold in yards |
1 |
£10.24 Ex VAT @ 20% |
||
V25 | 517307 |
ELBOW -- No. 4 injector pipeRevington TR information: Elbow to all injectors plus 3&4 at the Metering Unit. Not available new, use second hand part TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set... READ MORE |
2 | |||
V26 | 149585 |
PIPE ASSEMBLY, No. 5Triumph Catalogue Remarks: Fitted up to Engine No. CR1 HE |
1 | |||
V26A | UKC0362 |
PIPE ASSEMBLY, No. 5Triumph Catalogue Remarks: Fitted from Engine No. CR1 HE |
1 | |||
V26B | 517305 |
TUBE, 21 3/4" long - No. 5 injector pipeTriumph Catalogue Remarks: Sold in yards |
1 |
£10.24 Ex VAT @ 20% |
||
V27 | 517307 |
ELBOW -- No. 5 injector pipeRevington TR information: Elbow to all injectors plus 3&4 at the Metering Unit. Not available new, use second hand part TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set... READ MORE |
1 | |||
V28 | 517308 |
BANJO No. 5 injector pipeRevington TR information: Banjo Union, 2&5 at the Metering Unit. Not available new. Use second hand part 517308SH TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set out below... READ MORE |
1 | |||
V29 | 149565 |
PIPE ASSEMBLY, No. 6Triumph Catalogue Remarks: Fitted up to Engine No. CR1 HE |
1 | |||
V29A | UKC0352 |
PIPE ASSEMBLY, No. 6Triumph Catalogue Remarks: Fitted from Engine No. CR1 HE |
1 | |||
V29B | 517305 |
TUBE, 201/4" long - No. 6 injector pipeTriumph Catalogue Remarks: Sold in yards |
1 |
£10.24 Ex VAT @ 20% |
||
Note:- 5 yards of Tube No. 517305 will service one engine.Triumph Catalogue Remarks: However Braided Hose set RTR4107 is a better solution |
||||||
V30 | 517307 |
ELBOW - No. 6 injector pipeRevington TR information: Elbow to all injectors plus 3&4 at the Metering Unit. Not available new, use second hand part TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set... READ MORE |
1 | |||
V31 | 517306 |
NIPPLE AND NUT - No. 6 injector pipeRevington TR information: Straight Nipple and Nut, 1&6 at the Metering Unit. Not available new, use second hand part TR5-6 injector feed pipes were available in a variety of forms during the life of the TR5-6 and 2.5PI Set out... READ MORE |
1 | |||
V32 | 145891 |
CLIP, firtree, securing injector pipes |
3 | |||
V32A | 148672 |
CLIP, Injector pipesTriumph Catalogue Remarks: Fitted from Engine No. CR1 HE |
2 |
£5.17 Ex VAT @ 20% |
||
V32B | 148673 |
CLIP, Injector pipesTriumph Catalogue Remarks: Fitted from Engine No. CR1 HE |
3 |
£3.56 Ex VAT @ 20% |
Also in this listing
Metering Pump Unit, Control Assembly, Metering Distribution Assembly, Connection Kit, Injector Nozzle Assembly, Injector Pipes