Home » Chassis and bodywork » BODYWORK » TR4-4A-250 & 5 BODY SHELLS AND BODY COMPONENTS » TR4, 4A, 250 & 5 BODY SHELL COMPONENTS » TR4, 4A, 250 & 5 SURREY TOPS AND HARDTOPS

Chassis and bodywork

TR4, 4A, 250 & 5 SURREY TOPS AND HARDTOPS

Firstly, to clarify the correct description of Hardtops and Surrey Tops, although the general arrangement of fixed rear window with removable roof panel is generally referred to as a 'Surrey Top' car, this is in fact not correct. The cloth section, which replaces the roof panel, is the 'Surrey Top'. The rear window and frame is called the 'back light` and the roof panel is self-explanatory.

Revington TR has developed an ingenious new Backlight design, which incorporates a roll‑over bar (ROB). The Backlight frame is made from fibreglass, but uses for its strength an integral ROB with two backstays. The bar fits right up inside the fibreglass frame, thus affording maximum rollover protection, along with better rear visibility than with any other rollover bar available for use with a fixed backlight. The legs of the main hoop extend to the floor, whilst two rear stays attach to the top of the rear wheel arches. The main hoop is bolted to the 'B' posts too for added rigidity. Surrey tops and all three types of roof panel can be used in the normal manner.

Whilst the arrangement is much stronger with a ROB incorporated, Revington TR also offer a 'standalone' fibreglass back light frame which is constructed of much thicker fibreglass and does not need a ROB. It should be noted that this configuration is not as strong as the original aluminium and certainly nowhere near as strong as the ROB supported part.

To complete the installation a fit up kit will be needed, these are found under the heading 'FIT UP KITS, ROOF PANELS & ACCESSORIES' . To this might be added a surrey top or a hard top.

So, a typical installation might include: -

1 x RTR7122-3BRK Backlight Frame and ROB

1 x RTR7172F Fit up kit with flexiglass window

1 x RTR6139BK Surrey top kit

Please Note: Our backlight frame with and without the ROB or full cage has successfully been fitted to TR6 as well.

RTR7153 TR4-6 Standalone Backlight Frame.

This backlight frame has no ROB and is untrimmed. This backlight frame includes the internal bosses to accept the stainless steel finishers through which a surrey top or hard top is attached.

RTR7122 Series TR4-6 Roll Over Bar with Backlight Frame.

The part numbers in the series RTR7122 incorporate one untrimmed fibreglass backlight frame and one ROB. The part number suffix dictates the type of ROB included in the package.

RTR7267 Series TR4-6 Full cage, with Backlight Frame.

This full cage is neat and unobtrusive; it incorporates a set of legs to join from the cabin to the chassis. See RTR9177 series in section 9 for a fuller description. The front hoop goes down the side of the dash panel, requiring a small amount to be removed from each side. Revington TR do not approve of mutilating perfectly good original dash panel. To alleviate this problem we supply a solid aluminium panel, which can be adjusted to suit. Order Part no. RTR6133, see below.

17 results found.

< Back

Part No.	Description and Comments	Price	Add to Cart
RTR7153 CLICK FOR MORE INFO	FRAME REAR WINDOW FG TR4-5 ST WT Revington TR information: Fibreglass Backlight Frame strengthened internally, bare unit for use where an integral roll over bar is not wanted. Suitable for TR4, 4A, 250 and TR5, can also be fitted to TR6. RTR7153 series TR4-6 Standalone Backlight... READ MORE	£795.47 Ex VAT @ 20% £662.89
RTR7153FK CLICK FOR MORE INFO	BACKLIGHT FRAME KIT+FLEXIGLASS Revington TR information: Fibreglass Backlight Frame kit, strengthened internally, with a flexiglass window for use where an integral roll over bar is not wanted. Suitable for TR4, 4A, 250 and TR5, can also be fitted to TR6. RTR7153 series... READ MORE	£1598.26 Ex VAT @ 20% £1331.88
RTR7153GK CLICK FOR MORE INFO	BACKLIGHT FRAME KIT+GLASS Revington TR information: Fibreglass Backlight Frame kit, strengthened internally, with a glass window for use where an integral roll over bar is not wanted. Suitable for TR4, 4A, 250 and TR5, can also be fitted to TR6. RTR7153 series... READ MORE		No longer available
RTR7153XK CLICK FOR MORE INFO	BACKLIGHT FRAME KIT NO WINDOW Revington TR information: Fibreglass Backlight Frame kit, strengthened internally, supplied without a window for use where an integral roll over bar is not wanted. Suitable for TR4, 4A, 250 and TR5, can also be fitted to TR6. RTR7153 series... READ MORE	£1196.40 Ex VAT @ 20% £997.00	Currently unavailable
RTR7122-1AK CLICK FOR MORE INFO	REAR SCREEN FRAME+ ROAD ROB TR4 Revington TR information: TR4-6 Fibreglass backlight frame, untrimmed, unpainted with a Road ROB suitable for TR4, no diagonal brace. This kit fits both LHD and RHD cars. This kit consist of a Roll Over Bar (ROB) kit and a... READ MORE	£1420.81 Ex VAT @ 20% £1184.01
RTR7122-1BK CLICK FOR MORE INFO	REAR SCREEN FRAME+ ROAD ROB TR4A-6 Revington TR information: TR4-6 Fibreglass backlight frame, untrimmed, unpainted with a Road ROB suitable for TR4A-6, no diagonal brace. This kit fits both LHD and RHD cars. This kit consist of a Roll Over Bar (ROB) kit and a... READ MORE	£1420.81 Ex VAT @ 20% £1184.01
RTR7122-2ALK CLICK FOR MORE INFO	REAR SCREEN FRAME+ ROB FIX DIAG TR4 LHD Revington TR information: TR4-6 Fibreglass backlight frame, untrimmed, unpainted with a Road/competition ROB suitable for TR4, fixed diagonal brace. This kit fits LHD cars with the top of the brace above the drivers head. This kit consist of a... READ MORE	£1507.52 Ex VAT @ 20% £1256.27	Currently unavailable
RTR7122-2BLK CLICK FOR MORE INFO	REAR SCREEN FRAME+ ROB FIX DIAG TR4A-6 LHD Revington TR information: TR4-6 Fibreglass backlight frame, untrimmed, unpainted with a Road/competition ROB suitable for TR4A-6, fixed diagonal brace. This kit fits LHD cars with the top of the brace above the drivers head. This kit consist of a Roll... READ MORE	£1507.52 Ex VAT @ 20% £1256.27	Currently unavailable
RTR7122-2ARK CLICK FOR MORE INFO	REAR SCREEN FRAME+ ROB FIX DIAG TR4 RHD Revington TR information: TR4-6 Fibreglass backlight frame, untrimmed, unpainted with a Road/competition ROB suitable for TR4, fixed diagonal brace. This kit fits RHD cars with the top of the brace above the drivers head. This kit consist of... READ MORE	£1507.52 Ex VAT @ 20% £1256.27	Currently unavailable
RTR7122-2BRK CLICK FOR MORE INFO	REAR SCREEN FRAME+ ROB FIX DIAG TR4A-6 RHD and LHD Revington TR information: TR4-6 Fibreglass backlight frame, untrimmed, unpainted with a Road/competition ROB suitable for TR4A-6, fixed diagonal brace. This kit fits RHD cars with the top of the brace above the drivers head. This kit consist of... READ MORE	£1507.52 Ex VAT @ 20% £1256.27	Currently unavailable
RTR7122-3ALK CLICK FOR MORE INFO	REAR SCREEN FRAME+ ROB REM DIAG TR4 LHD Revington TR information: TR4-6 Fibreglass backlight frame, untrimmed, unpainted with a Road/competition ROB suitable for TR4, removable diagonal brace. This kit fits LHD cars with the top of the brace above the drivers head. This kit consist of a... READ MORE	£1684.68 Ex VAT @ 20% £1403.90	Currently unavailable
RTR7122-3BLK CLICK FOR MORE INFO	REAR SCREEN FRAME+ ROB REM DIAG TR4A-6 LHD Revington TR information: TR4-6 Fibreglass backlight frame, untrimmed, unpainted with a Road/competition ROB suitable for TR4A-6 removable diagonal brace. This kit fits LHD cars with the top of the brace above the drivers head. This kit consist of a... READ MORE	£1684.68 Ex VAT @ 20% £1403.90	Currently unavailable
RTR7122-3ARK CLICK FOR MORE INFO	REAR SCREEN FRAME+ ROB REM DIAG TR4 RHD Revington TR information: TR4-6 Fibreglass backlight frame, untrimmed, unpainted with a Road/competition ROB suitable for TR4, removable diagonal brace. This kit fits RHD cars with the top of the brace above the drivers head. This kit consist of a... READ MORE	£1684.68 Ex VAT @ 20% £1403.90	Currently unavailable
RTR7122-3BRK CLICK FOR MORE INFO	REAR SCREEN FRAME+ ROB REM DIAG TR4A-6 RHD Revington TR information: TR4-6 Fibreglass backlight frame, untrimmed, unpainted with a Road/competition ROB suitable for TR4A-6, removable diagonal brace. This kit fits RHD and LHD cars with the top of the brace above the drivers head. This kit consist... READ MORE	£1684.68 Ex VAT @ 20% £1403.90	Currently unavailable
RTR7267-1L CLICK FOR MORE INFO	BACKLIGHT FRAME + FULL CAGE TR4-5 LHD Revington TR information: TR4-5 Full cage, fixed diagonal LHD with Backlight Frame. The roof panel is not included but can be ordered separately. TR4-6 Fibreglass backlight frame, untrimmed, unpainted with a Full Safety Roll Cage, fixed diagonal LHD... READ MORE	£4345.60 Ex VAT @ 20% £3621.33
RTR7267-1R CLICK FOR MORE INFO	BACKLIGHT FRAME + FULL CAGE TR4-5 RHD Revington TR information: TR4-5 Full cage, fixed diagonal RHD with Backlight Frame. This full cage is neat and unobtrusive; it incorporates a set of legs to join from the cabin to the chassis. See RTR9177 series in section... READ MORE	£4345.60 Ex VAT @ 20% £3621.33
RTR9148HB CLICK FOR MORE INFO	HARNESS BAR STAND ALONE TR4-6 WITH FERRULES Revington TR information: Standalone Harness Bar TR4-6. This bar bolts to the wheel arches and provides 4 off 7/16"UNF attachment point for driver and passenger full harness shoulder straps. This supplementary transverse harness bar can be used on its... READ MORE	£377.71 Ex VAT @ 20% £314.76

Part No.

Description and Comments

Price

Add to Cart

Special Offer

AMMETER -60->+60 BLACK RIM

Chassis and bodywork

TR4, 4A, 250 & 5 SURREY TOPS AND HARDTOPS

RTR7153

RTR7153FK

RTR7153GK

RTR7153XK

RTR7122-1AK

RTR7122-1BK

RTR7122-2ALK

RTR7122-2BLK

RTR7122-2ARK

RTR7122-2BRK

RTR7122-3ALK

RTR7122-3BLK

RTR7122-3ARK

RTR7122-3BRK

RTR7267-1L

RTR7267-1R

RTR9148HB

To view the Triumph Catalogue Plates, please pick a car type