Choose Car Type


then
Search for parts
or
Browse
for parts

Engine, Transmission, wheels/Tyres and Heating/Cooling

ENGINE BLOCK PARTS

16 results found.
< Back
  Part No. Description and Comments Price Add to Cart
RTR1498

CLICK FOR
MORE INFO

RTR Upgrade

TR2-4 ARP HEAD STUD/NUT SET

Revington TR information: Set of 10 TR2-4A head studs, washers and nuts by ARP. Useful in an engine producing the highest power and therefor subject to the highest stesses A 6 cylinder kit is not available.

£553.56

Ex VAT @ 20%
£461.30



Available to order
046172

CLICK FOR
MORE INFO

CORE PLUG DISHED 1 INCH

Revington TR information: 1" welch plug used instead of 144687 on front of early TR5 engine block.

£2.30

Ex VAT @ 20%
£1.92



155660

CLICK FOR
MORE INFO

MAGNETIC DRAIN PLUG

Revington TR information: Magnetic sump plug, catches all the iron filings as your engine slowly wears. Can be used in gearbox and axle too. Don't forget the fibre washer which is sometimes required.

£17.81

Ex VAT @ 20%
£14.84



Available to order
RTR1068

CLICK FOR
MORE INFO

RTR Upgrade

BRACKET ALTERNATOR

Revington TR information: TR2-4A modified dynamo bracket to accept an alternator. Revington TR have three alternator/dynamo brackets available. 058912 Original TR2-4A dynamo mount. This bracket has its legs 102mm apart measured externally and 94mm internally (the material is 4mm... READ MORE

£32.32

Ex VAT @ 20%
£26.93



RTR1281

CLICK FOR
MORE INFO

RTR Upgrade

BLANK PETROL PUMP TR2-4A

Revington TR information: TR2-4A blank when mechanical petrol pump not used. We make these pieces by hand due to the very small sales volume. Some tool marks may be visible which could be polished out to improve the... READ MORE

£16.93

Ex VAT @ 20%
£14.11



RTR1026K

CLICK FOR
MORE INFO

RTR Upgrade

SEAL KIT REAR CRANK GACO TR2-4A

Revington TR information: Crankshaft Gaco lip type rear oil seal kit, suitable for TR2-4A, Vanguard and Ensign etc. The scroll is machined off the crankshaft down to 63.5mm and a Gaco type lip seal is fitted. The kit comes... READ MORE

£148.40

Ex VAT @ 20%
£123.67



RTR1026S

CLICK FOR
MORE INFO

RTR Upgrade

SEAL GACO RR CRANK TR2-4A

Revington TR information: Replacement seal for Crank shaft Gaco rear oil seal kit.

£14.99

Ex VAT @ 20%
£12.49



RTR1135K

RTR Upgrade

BOLT SET ENG->GEARBOX 8MM TR2-4A

Revington TR information: TR2-4A bolt set engine to gearbox with 8mm flange.

£29.96

Ex VAT @ 20%
£24.97



Available to order
RTR1147K

RTR Upgrade

BOLT SET ENG->G/BOX 14MM TR2-4A

Revington TR information: TR2-4A bolt set engine to gearbox with 14mm flange.

£32.02

Ex VAT @ 20%
£26.68



Available to order
112789

CLICK FOR
MORE INFO

GASKET FIG 8 0.015" STEEL

Revington TR information: Three thicknesses of figure of 8 gasket are available; 0.015" made from steel, 0.018" made from copper, and 0.021" made from aluminium or copper. The alternative thicknesses can be used to adjust the height of the... READ MORE

£3.79

Ex VAT @ 20%
£3.16



Available to order
112789CU

CLICK FOR
MORE INFO

FIGURE 8 GASKET COPPER 0.018"

Revington TR information: Three thicknesses of figure of 8 gasket are available; 0.015" made from steel, 0.018" made from copper, and 0.021" made from aluminium or copper. The alternative thicknesses can be used to adjust the height of the... READ MORE

£6.55

Ex VAT @ 20%
£5.46



Available to order
112789-021C

CLICK FOR
MORE INFO

GASKET FIG 8 0.021" Copper

Revington TR information: Three thicknesses of figure of 8 gasket are available; 0.015" made from steel, 0.018" made from copper, and 0.021" made from aluminium or copper. The alternative thicknesses can be used to adjust the height of the... READ MORE

£17.94

Ex VAT @ 20%
£14.95



112789X

CLICK FOR
MORE INFO

GASKET FIG 8 0.021" ALLY

Revington TR information: When NO LONGER AVAILABLE us 112789-021C. Three thicknesses of figure of 8 gasket are available; 0.015" made from steel, 0.018" made from copper, and 0.021" made from aluminium or copper. The alternative thicknesses can be used... READ MORE

 
No longer available 
151134-1

CLICK FOR
MORE INFO

SEALER BLOCK ENG TR5-6 STEEL

Revington TR information: Sealing block to front engine plate TR250, 5 and 6. Also suitable for 6 cylinder saloon cars. This part is manufactured from steel as an upgrade tot he standard aluminium version which is prone to having... READ MORE

£108.65

Ex VAT @ 20%
£90.54



Available to order
RTR1146K

RTR Upgrade

BOLT SET ENG-G/BOX TR5-6

Revington TR information: TR5-6 bolt set engine to gearbox.

£36.70

Ex VAT @ 20%
£30.58



Available to order
RTR1008

CLICK FOR
MORE INFO

RTR Upgrade

THRUST REPAIR BOTH CAP/BLOCK TR6

Revington TR information: Cost to modify a 6-cylinder engine to incorporate an extra thrust washer. This cost applies if the Crankshaft/block/cap all require machining. This procedure may be needed if the thrust washers have already fallen out and are... READ MORE

£686.90

Ex VAT @ 20%
£572.42



Available to order
16 results found.

To view the Triumph Catalogue Plates, please pick a car type