Choose Car Type


then
Search for parts
or
Browse
for parts

Engine, Transmission, wheels/Tyres and Heating/Cooling

PUSH RODS

Many gains in power and reliability in an engine can be achieved by careful building. When the rocker gear is installed, the rocker motion should result in the rocker being at 90° to the pedestal at half lift. To achieve this, the pedestal is either raised with shims, or the under-face machined off. This exercise will invariably result in the push rod ball pins being out of adjustment, requiring different length push rods. We therefore offer the push rods listed below to correct this situation. The push rods are measures in length overall. We appreciate that the correct way to measure would be from the centre of the ball end to the centre of the cup but as this is impractical an overall dimension gives an adequate indication of what will work in an individual application.

NOTE: For reference a TR250-6 Carb standard length is 211mm and TR5-6PI standard length is 206mm
11 results found.
< Back
  Part No. Description and Comments Price Add to Cart
RTR1191

CLICK FOR
MORE INFO

RTR Upgrade

PUSH ROD TUBULAR 198 MM TR5-6

Revington TR information: TR5-6 tubular push rod length 198mm. NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression. Part number 149513 is used in... READ MORE

 
No longer available 
151073

CLICK FOR
MORE INFO

PUSHROD T2000 8.0", 3.3" thick head

Revington TR information: Push Rod 6 Cylinder engine, 203mm (8") long MkII Triumph 2000 with flat top pistons and 3.3" thick cylinder head. Only two lengths of push rod were used in TR 6 cylinder engines although longer... READ MORE

 
No longer available 
151073SHK

CLICK FOR
MORE INFO

Second Hand PUSH ROD SET 12

Revington TR information: Push Rod 6 Cylinder engine, set of 12 Second Hand parts. 203mm (8") long MkII Triumph 2000 with flat top pistons and 3.3" thick cylinder head. Only two lengths of push rod were used in... READ MORE

£90.65

Ex VAT @ 20%
£75.54



Available to order
RTR1192

CLICK FOR
MORE INFO

RTR Upgrade

PUSH ROD TR5-6 203MM

Revington TR information: TR5-6 tubular push rod length 203mm. NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression. Part number 149513 is used in... READ MORE

£14.15

Ex VAT @ 20%
£11.79



Available to order
149513

CLICK FOR
MORE INFO

PUSH ROD TR5/6 CP PI 8.11"

Revington TR information: Standard TR5 CPTR6 push rod, 8.11" ( 206mm) long overall. NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression and a... READ MORE

£9.83

Ex VAT @ 20%
£8.19



RTR1193

CLICK FOR
MORE INFO

RTR Upgrade

PUSHROD 209.5mm (8.25")TR5-6

Revington TR information: TR5-6 tubular push rod length 209.5mm (8.25") NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression. Part number 149513 is used... READ MORE

 
No longer available 
148916

CLICK FOR
MORE INFO

PUSH ROD TR6 CR & TR250 TR6 CARB 8.3"(211mm)

Revington TR information: Standard TR250, TR6carb and CRTR6 push rod. NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression. Part number 149513 is used in... READ MORE

 
No longer available 
RTR1190

CLICK FOR
MORE INFO

RTR Upgrade

PUSH ROD 262mm O/A TR2-4A

Revington TR information: TR2-4A tubular push rod, length 262mm overall, of the type where the main shaft can be parted off with the cap in situ so that the cap can be pushed down into the tube to suit... READ MORE

£18.00

Ex VAT @ 20%
£15.00



RTR1189

CLICK FOR
MORE INFO

RTR Upgrade

PUSH ROD STD 260mm O/A Eff 253mm

Revington TR information: TR2-4A tubular push rod standard length: 260mm Many gains in power and reliability in an engine can be achieved by careful building. When the rocker gear is installed, the rocker motion should result in the rocker... READ MORE

 
No longer available 
RTR1155

CLICK FOR
MORE INFO

RTR Upgrade

PUSH ROD CH MOLY TR2-4A EACH

Revington TR information: TR2-4A Chrome Molybdenum Steel push rods. Length 275mm. These Push Rods are supplied with the lower ball end fitted and the top cup loose. This allows the fitter to trim the rod to the correct length... READ MORE

£51.24

Ex VAT @ 20%
£42.70



RTR1194

CLICK FOR
MORE INFO

RTR Upgrade

PUSHROD CHR-MOLY TR250, 5, 6

Revington TR information: TR5-6 Chrome Molybdenum Steel tube Push Rod for high stress applications. Priced each These push rods are 240mm long and are unfinished so that customers can cut them to the desired length. The lower ball pin... READ MORE

 
No longer available 
11 results found.

To view the Triumph Catalogue Plates, please pick a car type