- Part Detail
- CLICK TO VIEW
TRIUMPH PLATES - Browse Original Triumph Catalogue Plates
PUSHROD LOW COMPRESSION TR2-4A
Part No:
108616
NOT AVAILABLE This part is no longer available
Push rod, TR2-4A engine for use in low compression engines. When not available use second hand part 106968SH. listed here are all the push rods used throughout the production of TR2-4A engines.
Various pushrod types were used in TR2-4A engines as follows:
TR2-3B High compression 106968 Eng. No. 1-12960E, 114035 Eng. No. 12961E-55690E, 106968 Eng. No. 55691E on
TR4-4A High compression 106968
TR2-3B Low compression 108616 Eng. No. 1-12960E, 114048 Eng. No. 12961E-55690E, 108616 Eng. No. 55691E on
TR4-4A High compression 106968
TR4-4A Low compression 108616
Early High compression rods are 262mm long, 5/16" (7.94mm) diameter tubular type and later ones are 258mm long, 3/8" (9.52mm) Diameter which are much stronger. This later type is the type we now supply.
Low compression push rods are rare and none were available when this explanation was compiled, but we suspect they would be about 3-4mm longer. All second hand push rods are kept and supplied under part number 106968SH
TR2-3B High compression 106968 Eng. No. 1-12960E, 114035 Eng. No. 12961E-55690E, 106968 Eng. No. 55691E on
TR4-4A High compression 106968
TR2-3B Low compression 108616 Eng. No. 1-12960E, 114048 Eng. No. 12961E-55690E, 108616 Eng. No. 55691E on
TR4-4A High compression 106968
TR4-4A Low compression 108616
Early High compression rods are 262mm long, 5/16" (7.94mm) diameter tubular type and later ones are 258mm long, 3/8" (9.52mm) Diameter which are much stronger. This later type is the type we now supply.
Low compression push rods are rare and none were available when this explanation was compiled, but we suspect they would be about 3-4mm longer. All second hand push rods are kept and supplied under part number 106968SH