MOUNT REAR DAMPER TR3-4 LH

Part No:

110789

NOT AVAILABLE This part is no longer available

TR3-4 Left Hand rear damper mount. This improved stronger bracket was introduced during TR3 production from Comm. No. TS8637 and continued throughout TR4 production with stiffeners RTR7289 fitted as standard.

The TR2 bracket 107475 was certainly not up to the job and was prone to tearing out of the chassis due to the pivoting action of the rear lever arm damper.

Although additional stiffeners RTR7289 were fitted to the TR3-4 mounts parts numbers 110788 and 110789 as standard, a further improvement is recommended in the form of stiffener kit RTR7118K.

TR3-4 rear damper mounts are near identical but are handed as they sit an the chassis at a slight angle, due to the chassis being slightly angled from front to back and the dampers needing to sit in line with the centre line for the chassis. The forward facing side of the bracket is deeper that the rear side face by 3mm.

TR4 rally cars used the larger dampers (DAS10) and therefore larger and even stiffer mounting bracketry (RTR7043K) which can be substituted on TR2-4 chassis where the work the car is being put to dictates the need.

12 plates in total

PLATE M - CHASSIS FRAME. also contains: - Starting handle guide & stay (17)(18)

PLATE AF - BODY AND FITTINGS: BODY COMPLETE AND BODY MOUNTINGS.

PLATE AJ - BODY AND FITTINGS: MEDALLION, GRILL, BONNET AND BONNET FASTENER DETAILS. Dzus bonnet fattener details start at AJ24F

PLATE AG - BODY AND FITTINGS: FRONT APRON, FRONT WINGS AND BULKHEAD. Vent lid details which are not shown are listed from 17C to 17M

PLATE AM - BODY AND FITTINGS: WINDSCREEN ASSEMBLY, AERO SCREENS AND SCUTTLE EDGE ROLL TRIM.

PLATE AN - BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. Steering Grommet AN17A

PLATE AK - BODY AND FITTINGS: DOORS, HINGES AND LOCKS, CASINGS AND SIDE CURTAINS.

PLATE AH - BODY AND FITTINGS: FLOORS REAR WINGS AND REAR BODY PANELS.

PLATE AP - BODY AND FITTINGS: TONNEAU TRIM, REAR PANELS AND WHEEL ARCH COVERS. STONEGUARDS.

PLATE AL - BODY AND FITTINGS: BOOT LID, LOCKS AND HINGES. SPARE WHEEL LID AND STOWAGE DETAILS.

BODY AND FITTINGS: FRONT BUMPER AND REAR OVERRIDERS, MISCELLANEOUS BODY DETAILS. Parts not shown: -
Wing Beads from AS108 onwards. Grab handle AS50

PLATE AS - BODY AND FITTINGS: FRONT BUMPER AND REAR OVERRIDERS, MISCELLANEOUS BODY DETAILS. Parts not shown: - Wing Beads from AS108 onwards. Grab handle AS50

ACCESSORIES: SPAT COVERS, 2 SPEED WIPERS, UNDERSHIELD, REAR SEAT, HARD TOP ETC. Aeroscreens (AV11) Badge/Lamp Bar (AV14), Anti Roll Bar (AV302), Tool Kit, Dual speed wiper kit (AV32) Adjustable steering column (AV81) Hard top (AV234) Windscreen washer kit (AV275).

PLATE AV - ACCESSORIES: SPAT COVERS, 2 SPEED WIPERS, UNDERSHIELD, REAR SEAT, HARD TOP ETC. Aeroscreens (AV11) Badge/Lamp Bar (AV14), Anti Roll Bar (AV302), Tool Kit, Dual speed wiper kit (AV32) Adjustable steering column (AV81) Hard top (AV234) Windscreen washer kit (AV275).

Related Products

Part No.	Description and Comments	Price	Add to Cart
RTR7118K CLICK FOR MORE INFO	KIT STRENGTHING rear DAMPER bracket TR2-4 Revington TR information: TR2-4 Damper Mount Strengthening kit for attachment to Inboard face of standard rear damper mountings (DAS9 type). The kit consists of 8 parts to strengthen the standard damper mount as well as when our rear anti... READ MORE	£87.32 Ex VAT @ 20% £72.77	Available to order
110788 CLICK FOR MORE INFO	MOUNT Rear damper TR3-4 RH Revington TR information: TR3-4 Right Hand rear damper mount. This improved stronger bracket was introduced during TR3 production from Comm. No. TS8637 and continued throughout TR4 production with stiffeners RTR7289 fitted as standard. The TR2 bracket 107475... READ MORE		No longer available
RTR7289 CLICK FOR MORE INFO	Stiffener on rear damper bracket TR3-4 Revington TR information: This rear damper mount stiffener was not fitted to TR2 which had no stiffeners attached. An improved stronger bracket was introduced during TR3 production from Comm. No. TS8637 and continued throughout TR4 production with these stiffeners... READ MORE		No longer available
RTR7043K CLICK FOR MORE INFO	MOUNTING KIT DAMPER rear TR2-4 DAS10 Revington TR information: TR2-4 Strengthened larger rear damper mounting kit to accommodate RTR3313L and RTR3313R DAS10 type dampers. This kit Comprises 2 mountings and 4 strengtheners plus 4 screws, nuts and washers to attach the dampers to the brackets.... READ MORE	£191.38 Ex VAT @ 20% £159.48	Available to order
107475 CLICK FOR MORE INFO	BRACKET REAR Damper TR2 only Revington TR information: This rear damper mount was fitted to TR2 only and is a simple bracket with no stiffeners attached. An improved stronger bracket was introduced during TR3 production from Comm. No. TS8637 and continued throughout TR4 production.... READ MORE		No longer available

Car Type	Plate	Plate Title	Plate No.	Triumph Part Description	No per Unit
TR2	M	CHASSIS FRAME.	M11B	Bracket, rear shock absorber-L.H. From Comm. No. TS8637 TR3 to TR4 reinforced type	1
TR3	M	CHASSIS FRAME.	M11B	Bracket, rear shock absorber-L.H. From Comm. No. TS8637 TR3 to TR4 reinforced type	1
TR4	N	CHASSIS FRAME AND RADIATOR SKID SHIELD.	N11	Bracket, rear damper mounting L.H.	1

Shopping Cart