GEAR DIFF PLANET TR3-6

Part No:

113188

Superceded by 153385 - click here to view

All TR s from Girling TR3-TR6 use pinion gear 113188

The Differential fitted to TR2 8, Dolomite 2.5PI etc. use a common arrangement of thrust washers in conjunction with pinion gears. A complete range of thicknesses is shown below allowing excessive wear to be eliminated by use of one or a combination of thrust washers.
138440 0.027 ' 139952 0.056
147249 0.030 139953 0.060"
138441 0.035" 139954 0.064"
148805 0.041" 160375 0.065-67"
056793 0.048 139955 0.068"
139951 0.052" 139956 0.072"
TR s TR2-3- with a Lockheed axle use pinion gear 100823

17 plates in total

PLATE Q - REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS.

PLATE A - ENGINE: CYLINDER BLOCK AND HEAD

PLATE B - ENGINE: CRANK, PISTONS, CONNECTING RODS AND FLYWHEEL.

PLATE D - ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS.

PLATE F - ENGINE: OIL FILTER ASSEMBLY.

PLATE C - ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated).

PLATE H - ENGINE: WATER THERMOSTAT, WATER HOSES AND IGNITION (Not illustrated).

PLATE JA - ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated).

PLATE J - CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER.

PLATE K - GEARBOX: CASING, TOP COVER AND MOUNTING.

PLATE L - GEARBOX: MAINSHAFT, CONSTANT PINION SHAFT, COUNTERSHAFT AND REVERSE GEAR.

PLATE AT - HIGH SPEED EQUIPMENT: GEARBOX AND OVERDRIVE, COMPETITION PARTS AND TONNEAU COVER Uprated Springs, Dampers and Brakes

PLATE AW - OVERDRIVE UNIT DETAILS.

PLATE P - REAR AXLE: EARLY 'LOCKHEED' TYPE 4 BOLT MOUNTING.

PLATE PS - REAR AXLE: LATE 'GIRLING TYPE' 6 BOLT MOUNTING.

PLATE X - EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS.

PLATE AU - ACCESSORIES: HEATER KIT.

Part No.	Description and Comments	Price	Add to Cart
056793 CLICK FOR MORE INFO	DIFF PINION THRUST 0.048 INCH This item has been superceded by 139951 - see below
139951 CLICK FOR MORE INFO	THRUST WASHER 51/53 THOU Revington TR information: Thrust washer 0.052" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE	£9.07 Ex VAT @ 20% £7.56
100823SH CLICK FOR MORE INFO	Second Hand DIFF PLANET GEAR TR2 Revington TR information: A selection of various thicknesses of cupped washer are available from which suitable sizes can be selected as required to give zero backlash The Differential fitted to TR2 8, Dolomite 2.5PI etc. use a common arrangement... READ MORE	£68.14 Ex VAT @ 20% £56.78
138441 CLICK FOR MORE INFO	SHIM 0.035" Revington TR information: Thrust Washer 0.035" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE	£5.28 Ex VAT @ 20% £4.40
160375 CLICK FOR MORE INFO	THRUST 65-67 THOU Revington TR information: Thrust Washer 0.065-67" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE	£7.01 Ex VAT @ 20% £5.84
147249 CLICK FOR MORE INFO	THRUST WASHER 0.030 INCH Revington TR information: Thrust Washer 0.030" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE	£1.67 Ex VAT @ 20% £1.39
139955 CLICK FOR MORE INFO	THRUST WASHER 0.068" Revington TR information: Thrust Washer 0.068" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE	£7.60 Ex VAT @ 20% £6.33	Available to order
139956 CLICK FOR MORE INFO	THRUST WASHER 0.072" Revington TR information: Thrust Washer 0.072" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE	£7.60 Ex VAT @ 20% £6.33
139951 CLICK FOR MORE INFO	THRUST WASHER 51/53 THOU Revington TR information: Thrust washer 0.052" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE	£9.07 Ex VAT @ 20% £7.56
139952 CLICK FOR MORE INFO	THRUST WASHER 55/57 THOU Revington TR information: Thrust Washer 0.056" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE	£8.70 Ex VAT @ 20% £7.25
139953 CLICK FOR MORE INFO	THRUST WASHER 59/61 THOU Revington TR information: Thrust Washer 0.060" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE	£11.57 Ex VAT @ 20% £9.64
139954 CLICK FOR MORE INFO	THRUST WASHER 63/65 THOU Revington TR information: Thrust Washer 0.064" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE	£15.88 Ex VAT @ 20% £13.23
138440 CLICK FOR MORE INFO	WASHER DIFF 0.027" thich TR2-6 Revington TR information: Thrust Washer 0.027" ( 0.686mm) thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer... READ MORE	£5.28 Ex VAT @ 20% £4.40
148805 CLICK FOR MORE INFO	WASHER SHIM 0.041" Revington TR information: Thrust Washer 0.041" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE	£12.17 Ex VAT @ 20% £10.14

056793

CLICK FOR
MORE INFO

DIFF PINION THRUST 0.048 INCH

This item has been superceded by 139951 - see below

139951

CLICK FOR
MORE INFO

THRUST WASHER 51/53 THOU

Revington TR information: Thrust washer 0.052" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE

£9.07

Ex VAT @ 20%
£7.56

100823SH

CLICK FOR
MORE INFO

Second Hand DIFF PLANET GEAR TR2

Revington TR information: A selection of various thicknesses of cupped washer are available from which suitable sizes can be selected as required to give zero backlash The Differential fitted to TR2 8, Dolomite 2.5PI etc. use a common arrangement... READ MORE

£68.14

Ex VAT @ 20%
£56.78

138441

CLICK FOR
MORE INFO

SHIM 0.035"

Revington TR information: Thrust Washer 0.035" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE

£5.28

Ex VAT @ 20%
£4.40

160375

CLICK FOR
MORE INFO

THRUST 65-67 THOU

Revington TR information: Thrust Washer 0.065-67" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE

£7.01

Ex VAT @ 20%
£5.84

147249

CLICK FOR
MORE INFO

THRUST WASHER 0.030 INCH

Revington TR information: Thrust Washer 0.030" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE

£1.67

Ex VAT @ 20%
£1.39

139955

CLICK FOR
MORE INFO

THRUST WASHER 0.068"

Revington TR information: Thrust Washer 0.068" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE

£7.60

Ex VAT @ 20%
£6.33

139956

CLICK FOR
MORE INFO

THRUST WASHER 0.072"

Revington TR information: Thrust Washer 0.072" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE

£7.60

Ex VAT @ 20%
£6.33

139951

CLICK FOR
MORE INFO

THRUST WASHER 51/53 THOU

£9.07

Ex VAT @ 20%
£7.56

139952

CLICK FOR
MORE INFO

THRUST WASHER 55/57 THOU

Revington TR information: Thrust Washer 0.056" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE

£8.70

Ex VAT @ 20%
£7.25

139953

CLICK FOR
MORE INFO

THRUST WASHER 59/61 THOU

Revington TR information: Thrust Washer 0.060" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE

£11.57

Ex VAT @ 20%
£9.64

139954

CLICK FOR
MORE INFO

THRUST WASHER 63/65 THOU

Revington TR information: Thrust Washer 0.064" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE

£15.88

Ex VAT @ 20%
£13.23

138440

CLICK FOR
MORE INFO

WASHER DIFF 0.027" thich TR2-6

Revington TR information: Thrust Washer 0.027" ( 0.686mm) thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer... READ MORE

£5.28

Ex VAT @ 20%
£4.40

148805

CLICK FOR
MORE INFO

WASHER SHIM 0.041"

Revington TR information: Thrust Washer 0.041" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE

£12.17

Ex VAT @ 20%
£10.14

Car Type	Plate	Plate Title	Plate No.	Triumph Part Description	No per Unit
TR2	PS	REAR AXLE: LATE 'GIRLING TYPE' 6 BOLT MOUNTING.	PS13	Gear, pinion, differential From Comm. No. TS13046	2
TR3	PS	REAR AXLE: LATE 'GIRLING TYPE' 6 BOLT MOUNTING.	PS13	Gear, pinion, differential From Comm. No. TS13046	2
TR4	R	REAR AXLE	R13	'Gear, pinion, differential	2
TR4A	T	INDEPENDENT REAR AXLE: DIFFERENTIAL UNIT, REAR AXLE SHAFTS AND HUB UNITS.	T23	Pinion, differential-10 teeth	2
TR4A	U	RIGID REAR AXLE.	U13	Gear, pinion, differential	2
TR250	S	INDEPENDENT REAR AXLE	S29	Pinion, differential -10 teeth	2
TR5	R	INDEPENDENT REAR AXLE: DIFFERENTIAL UNIT, REAR AXLE SHAFTS AND HUB UNITS	R25	Pinion, differential-10 teeth	2
TR6CP	AE	INDEPENDENT REAR AXLE	AE25	PINION, differential - 10 teeth If fitted in pairs Alt to 153385	2
TR6CC	AE	INDEPENDENT REAR AXLE	AE25	PINION, differential - 10 teeth If fitted in pairs Alt to 153385	2

Shopping Cart