- Part Detail
- CLICK TO VIEW
TRIUMPH PLATES - Browse Original Triumph Catalogue Plates
AXLE BUMP STOP TR2-4
IN STOCK This part is immediately available
Buffer around the axle which acts as both a bump and a rebound stop. We recommend the SuperPro Polyurethane improved kit. Please see SPF1957K
This part is the correct size for TR3-4 Girling axles but too large for TR2-3 Lockheed axles which have a smaller axle tube diameter. For these axles the Bump/rebound Stop can be cut and reshaped to fit the smaller axle tube and held in place with the wire retainer as normal.
TR4's have an additional buffer attached under the rear floor to prevent the axle pinion casing travelling to far north. See part number RTR3468.
| Part No. | Description and Comments | Price | Add to Cart | |
|---|---|---|---|---|
 |
SPF1957K |
AXLE BUMP STOP kit TR2-4. 2 bump stops and 4 cable tiesRevington TR information: TR2-4 Bump stop kit Polyurethane. This main bump stop kit is an improvement on the standard part 115456, is fitted around the axle and acts as both a bump and a rebound stop. This product... READ MORE |
£65.59 Ex VAT @ 20% |
|
 |
EAW4321 |
WIRE TIE |
£0.58 Ex VAT @ 20% |
|
|
RTR3468
|
BUFFER REAR AXLE PINION HOUSING TR4Revington TR information: This Buffer is fitted to the underside of the rear floor of TR4's only to prevent the axle pinion casing travelling too far north. The parts we keep under this part number are second hand as... READ MORE |
£73.80 Ex VAT @ 20% |
