Choose Car Type


then
Search for parts
or
Browse for parts

 

VIBRATION DAMPER

Part No:
132604

NOT AVAILABLE This part is no longer available

Fitted to TR4 from approximately CT18000 on and retro fitted by dealers in accordance with Service Information sheet 2/53, the damper was intended to reduce any vibration that occurred between 2700 and 3000 RPM.

Two types of assembly were provided 144314 for non-overdrive gearboxes and 132604 for overdrive type gearboxes. As neither is available new, we keep second hand parts under the part number 132604SH.
The damper is a large block of steel with a Metalastic type rubber central bush, held onto the back of the gear box with Clip 132607 and to the existing anti-vibration strap 132951 with a horizontal Strap 132608



17 plates in total

ENGINE: CYLINDER BLOCK AND HEAD

PLATE A - ENGINE: CYLINDER BLOCK AND HEAD

ENGINE: CRANK, PISTONS, CONNECTING RODS AND FLYWHEEL.

PLATE B - ENGINE: CRANK, PISTONS, CONNECTING RODS AND FLYWHEEL.

ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS.

PLATE D - ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS.

ENGINE: OIL FILTER ASSEMBLY.

PLATE F - ENGINE: OIL FILTER ASSEMBLY.

ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated).

PLATE C - ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated).

ENGINE: WATER THERMOSTAT, WATER HOSES AND IGNITION (Not illustrated).

PLATE H - ENGINE: WATER THERMOSTAT, WATER HOSES AND IGNITION (Not illustrated).

ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated).

PLATE JA - ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated).

CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER.

PLATE J - CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER.

GEARBOX: CASING, TOP COVER AND MOUNTING.

PLATE K - GEARBOX: CASING, TOP COVER AND MOUNTING.

GEARBOX: MAINSHAFT, CONSTANT PINION SHAFT, COUNTERSHAFT AND REVERSE GEAR.

PLATE L - GEARBOX: MAINSHAFT, CONSTANT PINION SHAFT, COUNTERSHAFT AND REVERSE GEAR.

HIGH SPEED EQUIPMENT: GEARBOX AND OVERDRIVE, COMPETITION PARTS AND TONNEAU COVER Uprated Springs, Dampers and Brakes

PLATE AT - HIGH SPEED EQUIPMENT: GEARBOX AND OVERDRIVE, COMPETITION PARTS AND TONNEAU COVER Uprated Springs, Dampers and Brakes

OVERDRIVE UNIT DETAILS.

PLATE AW - OVERDRIVE UNIT DETAILS.

REAR AXLE: EARLY 'LOCKHEED' TYPE 4 BOLT MOUNTING.

PLATE P - REAR AXLE: EARLY 'LOCKHEED' TYPE 4 BOLT MOUNTING.

REAR AXLE: LATE 'GIRLING TYPE' 6 BOLT MOUNTING.

PLATE PS - REAR AXLE: LATE 'GIRLING TYPE' 6 BOLT MOUNTING.

REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS.

PLATE Q - REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS.

EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS.

PLATE X - EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS.

ACCESSORIES: HEATER KIT.

PLATE AU - ACCESSORIES: HEATER KIT.