SHAFT BOLT TR250-6 103mm

Part No:

148832

Price

£23.22

Price Ex VAT @ 20%

£19.35

AVAILABLE This part is available to order

TR250, 5 and 6 extensions 148831 are 84mm long with no register and use bolt 148832 which is 103mm long (measured from under the head). Consider second hand part 148832SH

46 plates in total

PLATE 20-04 - ENGINE (CARB MODELS) BLOCK Short Engine

PLATE 20-05 - ENGINE (CARB MODELS) BLOCK Cylinder Block, Liners, Oil Pressure Switch

PLATE 20-06 - ENGINE (CARB MODELS) End Plates, Rear Oil Seal

PLATE 20-07 - ENGINE (CARB MODELS) Sump, Dipstick, Lifting Eyes

PLATE 20-08 - ENGINE (CARB MODELS) ROTATING PARTS Crankshaft and Bearings, Flywheel and front Pulley, Hub and Fan Belt

PLATE 20-09 - ENGINE (CAR MODELS) Pistons and Connecting Rods, big end Bearings

PLATE 20-20 - ENGINE (CAR MODELS) cooling Fan

PLATE 20-17 - ENGINE (CARB MODELS) Oil Pump

PLATE 20-18 - ENGINE (CARB MODELS) Oil Filter and Canister

PLATE 20-10 - ENGINE (CARB MODELS) Rocker Cover & Gasket. Cylinder Head Gasket

PLATE 20-11 - ENGINE (CARB MODELS) Cylinder Head Assembly

PLATE 20-12 - ENGINE (CARB MODELS) Cylinder Head Rocker Gear and E.G.R. Valve

PLATE 20-13 - ENGINE (CARB MODELS) Cylinder Head Valve Gear, Camshaft Followers, Push Rods, Core Plugs and Studs

PLATE 20-14 - ENGINE (CARB MODELS) Camshaft, Timing Details, (Distributor Pedestals)

PLATE 20-15 - ENGINE (CARB MODELS) Timing Cover Details, Seal and Tensioner

PLATE 20-19 - ENGINE (CARB MODELS) Water Pump, Thermostat, Temperature Transmitter

PLATE 20-60 - ENGINE MOUNTINGS Front, on engine inc. Support Bracket

PLATE 20-61 - ENGINE MOUNTINGS Rear, inc. Support Brackets to Chassis.

PLATE 20-57 - CLUTCH ASSEMBLY Driven Plate and Pressure Plate

PLATE 20-65 - CLUTCH RELEASE Cross Shaft, Slave Cylinder and Clutch Operation details

PLATE 20-64 - GEARBOX UNIT ASSEMBLY None-Overdrive

PLATE 20-66 - GEARBOX Casing, Nose, speedometer Drive and Extension (non-overdrive)

PLATE 20-67 - GEARBOX TOP COVER Top Cover Assembly

PLATE 20-68 - GEARBOX TOP COVER Top Cover components; Selectors, Shafts, Gasket

PLATE 20-69 - GEARBOX Speed Change Lever

PLATE 20-70 - GEARBOX Constant Pinion Shaft and Mainshaft Gears

PLATE 20-71 - GEARBOX Mainshafts (overdrive and none-overdrive), Rear Bearing and Drive Flange

PLATE 20-72 - GEARBOX Reverse and Countershaft Gears, Layshaft, Thrust Washers

PLATE 20-73 - 'J' TYPE OVERDRIVE J type Overdrive Unit, adaptor & gaskets

PLATE 20-74 - 'J' TYPE OVERDRIVE UNIT Main case, Brake Ring, Cam, Solenoid, Filter Details

PLATE 20-75 - 'J' TYPE OVERDRIVE UNIT Annulus, Sunwheel, Planet Carrier, Sliding Member & Unidirectional Clutch

PLATE 20-76 - 'J' TYPE OVERDRIVE UNIT Rear Case, Speedometer Gears, Bearings, Seal and Flange

PLATE 20-77 - 'J' TYPE OVERDRIVE UNIT Relief Valve, Accumulator and Pump details

PLATE 22-55 - OVERDRIVE KIT Including Electrical Switching, Gearbox Top Cover, Transmission Cover an Speedometer Cable details

PLATE 20-80 - PROPELLOR SHAFT

PLATE 20-81 - REAR AXLE Center Assy.

PLATE 20-82 - REAR AXLE Main Case, Rear Cover, Front Mounting Plate & mountings

PLATE 20-83 - REAR AXLE Differential Gears and carrier, nose bearings & flange

PLATE 20-84 - REAR AXLE Inner Axle Shafts

PLATE 20-85 - REAR AXLE Hub and Outer Axle Shaft Assys.

PLATE 21-12 - ROAD WHEELS AND TRIM

PLATE 21-33 - RADIATOR hoses & overflow bottle. All Countries Except USA.

PLATE 21-34 - RADIATOR USA Only

PLATE 22-22 - HEATER Heater Unit, valve, controls & Water Hoses

PLATE 22-23 - HEATER FITTINGS Heater Air Ducting

PLATE 20-21 - ENGINE (CARB MODELS) Inlet Manifold and Water Pipes

Part No.	Description and Comments	Price	Add to Cart
148831 CLICK FOR MORE INFO	ENGINE HUB TR5-6 84mm Revington TR information: TR250, 5 and 6 Hub Extension part number 148831 are 84mm long with no register and use bolt part number 148832 which is 103mm long (measured from under the head) The extension piece is not... READ MORE		No longer available
148832SH	Second Hand BOLT ENGINE EXT Revington TR information: TR250, 5 and 6 extensions 148831 are 84mm long with no register and use bolt 148832SH which is 103mm long (measured from under the head).	£15.95 Ex VAT @ 20% £13.29	Available to order
148831SH CLICK FOR MORE INFO	Second Hand ENGINE HUB TR5-6 Revington TR information: TR250, 5 and 6 extensions 148831SH are 84mm long with no register and use bolt 148832 which is 103mm long (measured from under the head) not available new use 148831SH	£56.59 Ex VAT @ 20% £47.16

148831

CLICK FOR
MORE INFO

ENGINE HUB TR5-6 84mm

Revington TR information: TR250, 5 and 6 Hub Extension part number 148831 are 84mm long with no register and use bolt part number 148832 which is 103mm long (measured from under the head) The extension piece is not... READ MORE

148832SH

Second Hand BOLT ENGINE EXT

Revington TR information: TR250, 5 and 6 extensions 148831 are 84mm long with no register and use bolt 148832SH which is 103mm long (measured from under the head).

£15.95

Ex VAT @ 20%
£13.29

148831SH

CLICK FOR
MORE INFO

Second Hand ENGINE HUB TR5-6

Revington TR information: TR250, 5 and 6 extensions 148831SH are 84mm long with no register and use bolt 148832 which is 103mm long (measured from under the head) not available new use 148831SH

£56.59

Ex VAT @ 20%
£47.16

Car Type	Plate	Plate Title	Plate No.	Triumph Part Description	No per Unit
TR250	C	ENGINE: Internal	C12	Bolt, securing adaptor and pulley to crankshaft	1
TR5	C	ENGINE: CRANK, PISTONS CONNECTING RODS AND CAMSHAFT	C13	Bolt, securing adaptor and pulley to crankshaft	1
TR6CP	Q	ENGINE (Petrol Injection Model): Crankshaft, Camshaft, Pistons and Flywheel	Q13	BOLT, securing extension and pulley to crankshaft	1
TR6CC	C	ENGINE (Carburettor Model): Crankshaft, Camshaft, Pistons and Flywheel	C12	BOLT, securing adaptor and pulley to crankshaft	1
TR6CR	20-39	ENGINE (P.I. MODELS)	20-39	BOLT	1
TR6CF	20-08	ENGINE (CARB MODELS) ROTATING PARTS	20-08	BOLT	1

Shopping Cart

SHAFT BOLT TR250-6 103mm

This part appears on the following Triumph Catalogue Plates

46 plates in total