- Part Detail
- CLICK TO VIEW
TRIUMPH PLATES - Browse Original Triumph Catalogue Plates
THRUST 65-67 THOU
Part No:
160375
Price
£7.01
Price Ex VAT @ 20%
£5.84
IN STOCK This part is immediately available
![](https://www.revingtontr.com/images/no-product-image.jpg)
Thrust Washer 0.065-67" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm.
A selection of various thicknesses of cupped washer are available from which suitable sizes can be selected as required to give zero backlash
The Differential fitted to TR2 8, Dolomite 2.5PI etc. use a common arrangement of thrust washers in conjunction with pinion gears (100823 or 153385). A complete range of thicknesses is shown below allowing excessive wear to be eliminated by use of one or a combination of thrust washers.
138440 0.027 ' 139952 0.056
147249 0.030 139953 0.060"
138441 0.035" 139954 0.064"
148805 0.041" 160375 0.065-67"
056793 0.048 139955 0.068"
139951 0.052" 139956 0.072"
TR s TR2-3- with a Lockheed axle use pinion gear 100823
The Differential fitted to TR2 8, Dolomite 2.5PI etc. use a common arrangement of thrust washers in conjunction with pinion gears (100823 or 153385). A complete range of thicknesses is shown below allowing excessive wear to be eliminated by use of one or a combination of thrust washers.
138440 0.027 ' 139952 0.056
147249 0.030 139953 0.060"
138441 0.035" 139954 0.064"
148805 0.041" 160375 0.065-67"
056793 0.048 139955 0.068"
139951 0.052" 139956 0.072"
TR s TR2-3- with a Lockheed axle use pinion gear 100823