Choose Car Type


then
Search for parts
or
Browse for parts

 

BELL HOUSING & GEARBOX CASE TR4A-6

Part No:
210622

NOT AVAILABLE This part is no longer available

TR4A-6 (all models) Bell Housing & Gear Case. Only two types of gear case were used on TR4-6. The TR4 being the first model used a gear casing (part number 304692) where the bell housing flange was of a consistent thickness (8mm) around the whole flange.

For the TR4A (part number 210622) the flange thickness was doubled to 16mm in the areas where the studs and bolts attach the flange to the engine. This casing (part number 210622) was carried on to the end of TR6 production. 

These casings are not available new. Please see second hand parts (210622SH) listed below.

TR2-3B second hand casings are kept under the part number 206286SH

17 plates in total

REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS.

PLATE Q - REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS.

ENGINE: CYLINDER BLOCK AND HEAD

PLATE A - ENGINE: CYLINDER BLOCK AND HEAD

ENGINE: CRANK, PISTONS, CONNECTING RODS AND FLYWHEEL.

PLATE B - ENGINE: CRANK, PISTONS, CONNECTING RODS AND FLYWHEEL.

ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS.

PLATE D - ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS.

ENGINE: OIL FILTER ASSEMBLY.

PLATE F - ENGINE: OIL FILTER ASSEMBLY.

ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated).

PLATE C - ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated).

ENGINE: WATER THERMOSTAT, WATER HOSES AND IGNITION (Not illustrated).

PLATE H - ENGINE: WATER THERMOSTAT, WATER HOSES AND IGNITION (Not illustrated).

ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated).

PLATE JA - ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated).

CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER.

PLATE J - CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER.

GEARBOX: CASING, TOP COVER AND MOUNTING.

PLATE K - GEARBOX: CASING, TOP COVER AND MOUNTING.

GEARBOX: MAINSHAFT, CONSTANT PINION SHAFT, COUNTERSHAFT AND REVERSE GEAR.

PLATE L - GEARBOX: MAINSHAFT, CONSTANT PINION SHAFT, COUNTERSHAFT AND REVERSE GEAR.

HIGH SPEED EQUIPMENT: GEARBOX AND OVERDRIVE, COMPETITION PARTS AND TONNEAU COVER Uprated Springs, Dampers and Brakes

PLATE AT - HIGH SPEED EQUIPMENT: GEARBOX AND OVERDRIVE, COMPETITION PARTS AND TONNEAU COVER Uprated Springs, Dampers and Brakes

OVERDRIVE UNIT DETAILS.

PLATE AW - OVERDRIVE UNIT DETAILS.

REAR AXLE: EARLY 'LOCKHEED' TYPE 4 BOLT MOUNTING.

PLATE P - REAR AXLE: EARLY 'LOCKHEED' TYPE 4 BOLT MOUNTING.

REAR AXLE: LATE 'GIRLING TYPE' 6 BOLT MOUNTING.

PLATE PS - REAR AXLE: LATE 'GIRLING TYPE' 6 BOLT MOUNTING.

EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS.

PLATE X - EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS.

ACCESSORIES: HEATER KIT.

PLATE AU - ACCESSORIES: HEATER KIT.