Choose Car Type


then
Search for parts
or
Browse for parts

Home  »  Fuel and braking systems  »  FRONT BRAKES  »  STANDARD TR3-TR6 CALIPERS  »  CALIPER TR6 LATE IMP LH CLIP SEALS

CALIPER TR6 LATE IMP LH CLIP SEALS

Part No:
311851EX
Price
£185.74
Price Ex VAT @ 20%
£154.78
Deposit *
£50.00

AVAILABLE This part is available to order

* Deposit Required: A deposit is required for this part. This will be refunded in full or in part on receipt of exchange item, depending on the condition of the part received. Vat at the prevailing rate will be added to the deposit if applicable.

Calliper 16PB type LH, TR6 from CC29930 and CP26077 to TR6 CC81078 and CP76094. This type of caliper which uses ¼" pad retention pins, has imperial threads and later seals (retained with a spring clip).

This is an original unit rebuilt, consider also 4-pot caliper kit RTR4461PK. See below

Fuel and braking systems

12 plates in total

ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS.

PLATE D - ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS.

ENGINE: 1-1/2" SU CARBURETTORS. Vacuum pipe - see G86A

PLATE G - ENGINE: 1-1/2" SU CARBURETTORS. Vacuum pipe - see G86A

ENGINE: 1-3/4" SU CARBURETTORS.

PLATE GS - ENGINE: 1-3/4" SU CARBURETTORS.

ENGINE: PETROL PUMP.

PLATE E - ENGINE: PETROL PUMP.

PEDALS: ACCELERATOR, CLUTCH AND BRAKE.

PLATE T - PEDALS: ACCELERATOR, CLUTCH AND BRAKE.

MASTER CYLINDER: TWIN AND LATE SEPARATE CYLINDERS WITH RESERVOIR Girling cylinders and components (not illustrated) are listed from item U32 onward.

PLATE U - MASTER CYLINDER: TWIN AND LATE SEPARATE CYLINDERS WITH RESERVOIR Girling cylinders and components (not illustrated) are listed from item U32 onward.

BRAKE UNIT: FRONT AND REAR, LOCKHEED AND GIRLING.

PLATE V - BRAKE UNIT: FRONT AND REAR, LOCKHEED AND GIRLING.

BRAKE UNIT: FRONT CALIPERS AND REAR DRUMS.

PLATE X - BRAKE UNIT: FRONT CALIPERS AND REAR DRUMS.

HANDBRAKE: LEVER, CABLES AND COMPENSATOR.

PLATE S - HANDBRAKE: LEVER, CABLES AND COMPENSATOR.

CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER.

PLATE J - CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER.

HYDRAULIC PIPES, PETROL PIPES, PETROL TANK AND SENDER UNIT.

PLATE W - HYDRAULIC PIPES, PETROL PIPES, PETROL TANK AND SENDER UNIT.

HIGH SPEED EQUIPMENT: GEARBOX AND OVERDRIVE, COMPETITION PARTS AND TONNEAU COVER Uprated Springs, Dampers and Brakes

PLATE AT - HIGH SPEED EQUIPMENT: GEARBOX AND OVERDRIVE, COMPETITION PARTS AND TONNEAU COVER Uprated Springs, Dampers and Brakes