Choose Car Type


then
Search for parts
or
Browse
for parts

CAGE FOR 9/16" square nut .32" deep

Part No:
600032

NOT AVAILABLE This part is no longer available

This steel cage, is used to retain square nuts, usually with 5/16" or 3/8" UNF and 8-10mm threads. This deep cage is not available, however, a shallower cage is, with sufficiently long weld on legs to enable them to be bent over a little to accommodate slightly deeper nuts of the type that would be used in 600032 type cages. See cage RTR5135 below

Square nuts and cages are used to provide a bit of 'wobble' when aligning components as the cage is slightly larger than the nut but still stops the nut from rotating. The full range of cages and square nuts is listed here to enable easy matching of nuts and cages for any application: -
 

Part Number

Description

CN2 Cage 1/2" square, 1/4" deep internally for 7/16" square nuts. Overall length 1.43"
CN2-1 Cage, mounts in a square hole in the panel. Use CN1 nuts
CN3 Cage long 1/2" wide 11/16" long, 1/4" deep internally for 7/16" square nuts. Overall length 1.72"
CN1 Nut 1/4"UNF 7/16" square 0.177" thick. Uses cage CN2 or CN3
CN4 Nut 1/4"UNF 1/2" square 0.125" thick. 
CN6 Nut 1/4"UNF 7/16" square 0.125" thick. 
600032 Cage 5/8" square, 3/8" deep internally for 9/16" square nuts. Overall length 1.65"
RTR5135 Cage 11/16" square, 0.2" deep internally for 9/16" or 5/8" square nuts. Overall length 2.125"
RTR5135-1  Cage, mounts in a square hole in the panel. Use CN4. 5 or RTR5137 nuts 
CN5 Nut  5/16"UNF 1/2" square.
NQ2708 Nut 5/16"UNF 9/16" square 0.25" thick. 
NQ2708SS Nut 5/16"UNF 9/16" square 0.25" thick. Stainless Steel
RTR5136 Nut 5/16"UNF 5/8" square 0.2" thick. 
RTR5137 Nut 3/8"UNF 9/16" square 0.213" thick. 

To view the Triumph Catalogue Plates, please pick a car type