Choose Car Type


then
Search for parts
or
Browse for parts

 

BOOT LID TR3A PRE60K STEEL

Part No:
802637
Price
£1065.64
Price Ex VAT @ 20%
£888.03

IN STOCK This part is immediately available

This reproduction steel boot lid includes all the internal brackets and framing as original.

Revington TR have made their own tooling after researching the various shapes and forms found on a variety of boot lids and the apertures on cars they have to fit. Considerable variation was found so a compromise has been determined that will give a good fit on most cars. Do bear in mind that a rebuilt car may well have been built around a poorly shaped boot lid!

Intended to fit TR3A pre commission number 60,000 it has a central hole for the locking handle but no side holes or brackets to accept the budget locks which were omitted at this change point.

There were 3 types of boot lid fitted to TR2-3B
900479 is suitable for TR2-3 with a central lock and side budget locks. There is an integral internal frame and the hinges are flush with the boot lid skin.
802637 is suitable for TR3A's pre commission number 60,000 with a central lock and no side budget locks. There is an integral internal frame and the hinges are flush with the boot lid skin.
803780 is suitable for TR3A's post commission number 60,000 with a central lock and no side budget locks. The hinges sit on plinths pressed up into the boot lid skin.

Steel, aluminium and fibreglass versions are available as well as second hand parts. See below.


To view the Triumph Catalogue Plates, please pick a car type