Originally the rear deck of a TR4, 4A, 5 and 250 was supplied as a single item comprising a centre deck, two forward and two rear deck panels (sometimes called tonneau panels) under the following part numbers.

850346  TR4 rear deck assembly. Up to CT5642 with the bracket to accommodate the early rod type boot lid stay attached

806820 TR4 rear deck assembly. From CT5643 with the bracket to accommodate the late retracting type boot lid stay attached

808776   TR4A, 250, 5 rear deck assembly

These are now not available as a complete assembly; please use the following panels.

808776RP  TR4A, 250, 5 centre deck. Use for TR4 too
813708 TR4A, 250, 5, 6 LH forward tonneau panel.
813709 TR4A, 250, 5, 6 RH forward tonneau panel.
850007 TR4, 4A, 250, 5 LH rear tonneau panel.
850008 TR4, 4A, 250, 5 RH rear tonneau panel.

TR4 owners please note that your centre deck and forward tonneau panels are different to TR4A-5 insofar as the width of the faised section of the forward tonneay panel is the same going rearwards to the centre deck, The TR4A-5 (and the TR6) panle is waisted near the rear deck to provide room for the bulkier hood to fold down. Currently these panels are unavailable however the TR4A, 250, 5 parts above can be used with little visible difference.

The centre part of the deck assembly has 3 frame parts underneath it; a long one across the rear that adds strength and holds the tank board and two fore and aft that hold the petrol tank. These are not supplied with 808776RP and should be removed from the panel being replaced. If you do not have a frame set RevingtonTR can have a set made under part number 808776FI to special order.