Choose Car Type


then
Search for parts
or
Browse for parts

 

BUMPER IRON FRONT TR6 CP,CC RH

Part No:
814460

NOT AVAILABLE This part is no longer available

Right Hand TR6 front bumper bracket 814460 fitted up to commission number CF1.

This part differs from the later part 821409 only in that it does not have fitted the stiffening plate onto which the support tube is fitted.
Neither part is available new, please use second hand parts 814460SH, 821409SH or powder coated second hand parts 814460SHPC, 821409SHPC. See below

Although there are 4 types of TR6 front bumper, (CC and CP, CR and USA CF1-CF1250, USA CF1251-27000 and finally USA CF27001 to end) only two types of bracket, between the chassis and the front valence were employed.

814459 LH and 814460 RH used on CP and CC models only
821408 LH and 821409 RH used on the remaining 3 types. These brackets are in fact the same as the earlier brackets but with caged nuts fitted to attach the extra tube support from the cross tube. They are of sturdier construction having a doubler plate welded on the front of the bracket in an effort to minimise body damage in the event of low speed frontal impact.

Note: TR6 parts book RTC9093A shows 821408 as left hand & 821409 as right hand for USA markets on page 22.32 and on page 22.36 the other way round for all markets except the USA. This clearly cannot be correct.
For clarity 821408 is Left Hand and 821409 is Right Hand and this is confirmed in parts book 517785/A


To view the Triumph Catalogue Plates, please pick a car type