Choose Car Type


then
Search for parts
or
Browse
for parts

NUT SQUARE 1/4" UNF, 7/16" square, 1/4" thick

Part No:
CN6

NOT AVAILABLE This part is no longer available

Nut square 1/4" UNF, 0.437" across the flats, (7/16"AF), 1/4" thick. Triumph and general application. Not currently available, the thinner CN1 can be used as an alternative. A full range of cages and nuts is available, detailed in the table below.

Square nuts and cages are used to provide a bit of 'wobble' when aligning components as the cage is slightly larger than the nut but still stops the nut from rotating. The full range of cages and square nuts is listed here to enable easy matching of nuts and cages for any application: -
 

Part Number

Description

CN2 Cage 1/2" square, 1/4" deep internally for 7/16" square nuts. Overall length 1.43"
CN2-1 Cage, mounts in a square hole in the panel. Use CN1 nuts
CN3 Cage long 1/2" wide 11/16" long, 1/4" deep internally for 7/16" square nuts. Overall length 1.72"
CN1 Nut 1/4"UNF 7/16" square 0.177" thick. Uses cage CN2 or CN3
CN4 Nut 1/4"UNF 1/2" square 0.125" thick. 
CN6 Nut 1/4"UNF 7/16" square 0.125" thick. 
600032 Cage 5/8" square, 3/8" deep internally for 9/16" square nuts. Overall length 1.65"
RTR5135 Cage 11/16" square, 0.2" deep internally for 9/16" or 5/8" square nuts. Overall length 2.125"
RTR5135-1  Cage, mounts in a square hole in the panel. Use CN4. 5 or RTR5137 nuts 
CN5 Nut  5/16"UNF 1/2" square.
NQ2708 Nut 5/16"UNF 9/16" square 0.25" thick. 
NQ2708SS Nut 5/16"UNF 9/16" square 0.25" thick. Stainless Steel
RTR5136 Nut 5/16"UNF 5/8" square 0.2" thick. 
RTR5137 Nut 3/8"UNF 9/16" square 0.213" thick.