- Part Detail
- CLICK TO VIEW
TRIUMPH PLATES - Browse Original Triumph Catalogue Plates
CLUTCH COVER TR4A-7 BORG & BECK
AVAILABLE This part is available to order
Diaphragm Clutch Cover Standard specification. Whist this part is available new, Revington TR can also offer an exchange part GCC228EX which is remanufactured to the original specification.
This cover can also be used in TR2-4 where the flywheel has been re-drilled to accept the diaphragm cover.
Two types of clutch assemblies consisting of a driven plate and a cover assembly were fitted to TR4A, 250, 5 and 6, Borg and Beck being one manufacturer and Laycock being the other. Both Driven Plates and Cover Assemblies are interchangeable. In addition a raised finger version is available which once again is completely interchangeable with all other components listed.
Uprated Release Bearing GRB211HD and a phosphor bronze carrier as well as uprated parts are listed below. A light duty cover is available too. see below
| Part No. | Description and Comments | Price | Add to Cart | |
|---|---|---|---|---|
 |
GRB211HD |
BEARING CLUTCH RELEASE H/DUTYRevington TR information: TR4A-6 Release bearing, heavy duty. The introduction of this bearing has been prompted by the recent poor quality of the original style bearing. GRB211HD is a modern bearing which is much more reliable than the original... READ MORE |
£77.89 Ex VAT @ 20% |
|
 |
147858PB |
CARRIER RELEASE BEARING PB TR4A-6Revington TR information: TR4A-6 clutch release bearing carrier made from high quality phosphor bronze. A very high quality part with an internal diameter machined to very tight tolerance for a perfect fit. The original TR4A part, of a similar... READ MORE |
£145.51 Ex VAT @ 20% |
|
 |
GCP143 |
CLUTCH PLATE TR4A-6 B&BRevington TR information: Whist this Driven Plate is available new, Revington TR prefer due to varying quality of newly manufactured parts, often having fewer rivets holding them together than were present in the original equipment, to supply an... READ MORE |
£122.28 Ex VAT @ 20% |
|
|
GCP143EX |
CLUTCH PLATE TR4A/6 RECON EXCHRevington TR information: Diaphragm Clutch Driven Plate Exchange, Borg and Beck type. A deposit will be charged until a reconditionable part is returned. Whist this driven plate is available new, Revington TR prefer this exchange part as quality of... READ MORE |
£120.83 Ex VAT @ 20% |
|
|
GCC228EX |
EXCHANGE CLUTCH COVER TR4A-7 BORG & BECKRevington TR information: Exchange TR4A-7 Diaphragm Clutch Cover suitable for normal and slightly uprated loads where the car is used for lively driving. Pull off pressure 66-80kg. This cover can also be used in TR2-4 where the flywheel has... READ MORE |
£134.69 Ex VAT @ 20% |
|
|
GCC228-1EX |
EXCHANGE LIGHT DUTY COVER TR4A-7Revington TR information: Exchange TR4A-6 Diaphragm Clutch Cover suitable for light loads where the car is used for touring or casual use and a light feel to the clutch is important. Pull off pressure 55-65kg This cover can also... READ MORE |
£120.89 Ex VAT @ 20% |
|
 |
GCC139EX |
CLUTCH COVER LAYCOCK 4A/6 RECON EXRevington TR information: Diaphragm Clutch Cover Assembly Exchange. A deposit will be charged until a reconditionable part is returned. Note that Laycock clutch parts are very difficult to find so an alternative detailed below may need to... READ MORE |
£134.71 Ex VAT @ 20% |
|
 |
148402EX |
CLUTCH PLATE LAYCOCK TR4A/6 EXCH.Revington TR information: Diaphragm Clutch Driven Plate Exchange. A deposit will be charged until a reconditionable part is returned. This Laycock Clutch Driven Plate is not available new. Note that Laycock clutch parts are very difficult to find... READ MORE |
£129.04 Ex VAT @ 20% |
|
|
RTR1051
|
CLUTCH COVER UPRATED TR4A-7Revington TR information: New clutch cover TR4A 6 uprated. Suitable for all fast road applications. Borg and Beck type 8.5"diameter, weight 4.8kg. The specification of this part is Torque capacity:224Nm (165lbs/ft) using driven plates RTR1052 or RTR1052EX Clamp load:... READ MORE |
£392.20 Ex VAT @ 20% |
|
|
RTR1051EX
|
EXCHANGE COVER UPRATED TR4-7Revington TR information: Exchange TR4A - 6 uprated clutch cover. Suitable for all fast road applications. Borg and Beck, weight 4.8kg. (Standard TR2 weighs 6.2kg), exchange. Every bit as good as the outright product, but cheaper. Pull off pressure... READ MORE |
£241.67 Ex VAT @ 20% |
|
|
RTR1052
|
CLUTCH PLATE UPRATEDRevington TR information: New uprated clutch plate TR4A-6 uprated, Borg and Beck, type 8.5" diameter. Weight 1.4kg. The combination of this plate and cover RTR1051 works well for fast road/hillclimb, sprint and rally with power up to 150 BHP... READ MORE |
£323.51 Ex VAT @ 20% |
|
|
RTR1052EX
|
CLUTCH PLATE UPRATED EXCHANGERevington TR information: TR4A-6 uprated clutch plate, Borg and Beck. Weight 1.4kg. 8.5" (215mm) diameter. The combination of this plate and cover RTR1051 works well for fast road/hillclimb, sprint and rally with power up to 150 BHP at the... READ MORE |
£164.42 Ex VAT @ 20% |
|
|
RTR1417
|
CLUTCH COVER TR4A-7 DIAPHRAM H GRADRevington TR information: TR4A-6 High grade diaphragm clutch cover for use with 8.5" RTR1418 and RTR1090 series plates, will transmit 314NM (231ftlb) torque. This cover can also be used in TR2-4 where the flywheel has been re-drilled to accept... READ MORE |
£444.50 Ex VAT @ 20% |
|
|
RTR1417EX
|
EXCHANGE COVER TR4A-7 DIAPHRAM H GRADRevington TR information: Exchange TR4A-6 High grade diaphragm clutch cover suitable for very fast road cars, hillclimb and sprint and mild race cars. Pull off pressure 96-110kg. This Clutch Cover is 215mm (8.5") diameter and has a torque... READ MORE |
£342.11 Ex VAT @ 20% |
|
 |
RTR1417-1EX
|
CLUTCH COVER TR4A-7 DOUBLE DIAPHRAM H GRADRevington TR information: Exchange TR4A-8 High grade diaphragm clutch cover 8.5" featuring a double diaphragm for maximum torque transmission. Pull off pressure 90-110kg. This cover is the highest torque transmitting cover we can offer before going to very expensive... READ MORE |
£420.32 Ex VAT @ 20% |
|
|
RTR1418
|
TR4A-6 CLUTCH PLATE HIGH GRADE ORGARevington TR information: TR4A-6 Organic Centre Plate capable of transmitting 257NM (189ftlb) of torque when used with RTR1417, RTR1417EX or RTR1417-1EX. Suits 1.25" x 10 spline. This plate can also be used in TR2-4 where the flywheel has been... READ MORE |
£266.70 Ex VAT @ 20% |
|
 |
RTR1090-1.25
|
CLUTCH PLATE CERAMETALIC TR4A-6 8.5" DIARevington TR information: TR4A-6 Uprated Clutch Plate with standard type sprung hub but with cerametallic clutch material. suits 1.25" x 10 spline. Weight 1.7kg. Capable of transmitting 287NM (213ftlb) of torque when used with RTR1417 cover. Whilst the... READ MORE |
£460.91 Ex VAT @ 20% |
