CLUTCH COVER TR4A-7 DIAPHRAM H GRAD

Home » Engine, Transmission, wheels/Tyres and Heating/Cooling » FLYWHEELS, CLUTCHES AND RELEASE MECHANISMS » CLUTCHES » CLUTCH COVER TR4A-7 DIAPHRAM H GRAD

CLUTCH COVER TR4A-7 DIAPHRAM H GRAD

Part No:

RTR1417

Price

£444.50

Price Ex VAT @ 20%

£370.42

CURRENTLY UNAVAILABLE

TR4A-6 High grade diaphragm clutch cover for use with 8.5" RTR1418 and RTR1090 series plates, will transmit 314NM (231ftlb) torque.

This cover can also be used in TR2-4 where the flywheel has been re-drilled to accept the diaphragm cover.

Two types of clutch assemblies consisting of a driven plate and a cover assembly were fitted to TR4A, 250, 5 and 6, Borg and Beck being one manufacturer and Laycock being the other. Both Driven Plates and Cover Assemblies are interchangeable. In addition a raised finger version is available which once again is completely interchangeable with all other components listed.

Uprated Release Bearing GRB211HD and a phosphor bronze carrier as well as uprated parts are listed below. A light duty cover is available too. see below

Engine, Transmission, wheels/Tyres and Heating/Cooling

47 plates in total

PLATE 20-35 - ENGINE (P.I. MODELS) Block, Crank Pistons Short Engine Assembly

PLATE 20-36 - ENGINE (P.I. MODELS) Cylinder Block, Liners, Oil Pressure Relief Valve and Switch, Core Plugs

PLATE 20-37 - ENGINE (P.I. MODELS) Plates front and rear, Rear Oil Seal

PLATE 20-38 - ENGINE (P.I. MODELS) Sump, Dipstick, Lifting Eyes

PLATE 20-39 - ENGINE (P.I. MODELS) Crankshaft and Flywheel, front pulley and fan belt

PLATE 20-40 - ENGINE (P.I. MODELS) Pistons & Connecting Rods, Big End Bearings

PLATE 20-41 - ENGINE (P.I. MODELS) Rocker Cover & Gasket, Cylinder Head Gasket

PLATE 20-42 - ENGINE (P.I. MODELS) Cylinder Head, rocker shaft, valves and Springs, push rods and cam followers. Core Plugs

PLATE 20-43 - ENGINE (P.I. MODELS) Camshaft, Timing chain and sprocket

PLATE 20-44 - ENGINE (P.I. MODELS) Timing Cover, front oil seal and chain tensioner

PLATE 20-45 - ENGINE (P.I. MODELS) Pedestal supporting Metering Unit and Distributor, Driving Gears and Seals

PLATE 20-46 - ENGINE (P.I. MODELS) Oil Pump

PLATE 20-47 - ENGINE (P.I. MODELS) Oil Filter and Housing

PLATE 20-48 - ENGINE (P.I. MODELS) Water Pump, Thermostat, Temperature Transmitter

PLATE 20-49 - ENGINE (P.I. MODELS) Cooling Fan and Hub

PLATE 20-56 - ENGINE (P.I. MODELS) Alternator Mounting Details

PLATE 20-52 - ENGINE (P.I. MODELS) Breather details and Air Manifold attachment details

PLATE 20-53 - ENGINE (P.I. MODELS) Air Manifold Assembly, joining tubes to throttle bodies & Air Filter Assembly

PLATE 20-60 - ENGINE MOUNTINGS Front, on engine inc. Support Bracket

PLATE 20-61 - ENGINE MOUNTINGS Rear, inc. Support Brackets to Chassis.

PLATE 20-57 - CLUTCH ASSEMBLY Driven Plate and Pressure Plate

PLATE 20-65 - CLUTCH RELEASE Cross Shaft, Slave Cylinder and Clutch Operation details

PLATE 20-64 - GEARBOX UNIT ASSEMBLY None-Overdrive

PLATE 20-66 - GEARBOX Casing, Nose, speedometer Drive and Extension (non-overdrive)

PLATE 20-67 - GEARBOX TOP COVER Top Cover Assembly

PLATE 20-68 - GEARBOX TOP COVER Top Cover components; Selectors, Shafts, Gasket

PLATE 20-69 - GEARBOX Speed Change Lever

PLATE 20-70 - GEARBOX Constant Pinion Shaft and Mainshaft Gears

PLATE 20-71 - GEARBOX Mainshafts (overdrive and none-overdrive), Rear Bearing and Drive Flange

PLATE 20-72 - GEARBOX Reverse and Countershaft Gears, Layshaft, Thrust Washers

PLATE 22-55 - OVERDRIVE KIT Including Electrical Switching, Gearbox Top Cover, Transmission Cover an Speedometer Cable details

PLATE 20-73 - 'J' TYPE OVERDRIVE J type Overdrive Unit, adaptor & gaskets

PLATE 20-74 - 'J' TYPE OVERDRIVE UNIT Main case, Brake Ring, Cam, Solenoid, Filter Details

PLATE 20-75 - 'J' TYPE OVERDRIVE UNIT Annulus, Sunwheel, Planet Carrier, Sliding Member & Unidirectional Clutch

PLATE 20-76 - 'J' TYPE OVERDRIVE UNIT Rear Case, Speedometer Gears, Bearings, Seal and Flange

PLATE 20-77 - 'J' TYPE OVERDRIVE UNIT Relief Valve, Accumulator and Pump details

PLATE 20-80 - PROPELLOR SHAFT

PLATE 20-81 - REAR AXLE Center Assy.

PLATE 20-82 - REAR AXLE Main Case, Rear Cover, Front Mounting Plate & mountings

PLATE 20-83 - REAR AXLE Differential Gears and carrier, nose bearings & flange

PLATE 20-84 - REAR AXLE Inner Axle Shafts

PLATE 20-85 - REAR AXLE Hub and Outer Axle Shaft Assys.

PLATE 21-12 - ROAD WHEELS AND TRIM

PLATE 21-33 - RADIATOR hoses & overflow bottle. All Countries Except USA.

PLATE 22-22 - HEATER Heater Unit, valve, controls & Water Hoses

PLATE 22-23 - HEATER FITTINGS Heater Air Ducting

PLATE 20-50 - ENGINE (P.I. MODELS) Exhaust Manifold, inlet/exhaust gasket and Water Return Pipe

Part No.	Description and Comments	Price	Add to Cart
GRB211HD CLICK FOR MORE INFO	BEARING CLUTCH RELEASE H/DUTY Revington TR information: TR4A-6 Release bearing, heavy duty. The introduction of this bearing has been prompted by the recent poor quality of the original style bearing. GRB211HD is a modern bearing which is much more reliable than the original... READ MORE	£77.89 Ex VAT @ 20% £64.91
147858PB CLICK FOR MORE INFO	CARRIER RELEASE BEARING PB TR4A-6 Revington TR information: TR4A-6 clutch release bearing carrier made from high quality phosphor bronze. A very high quality part with an internal diameter machined to very tight tolerance for a perfect fit. The original TR4A part, of a similar... READ MORE This item has a secondhand part available - see below	£145.51 Ex VAT @ 20% £121.26
147858PBSH	SLEEVE Second Hand	£56.10 Ex VAT @ 20% £46.75
RTR1417EX CLICK FOR MORE INFO	EXCHANGE COVER TR4A-7 DIAPHRAM H GRAD Revington TR information: Exchange TR4A-6 High grade diaphragm clutch cover suitable for very fast road cars, hillclimb and sprint and mild race cars. Pull off pressure 96-110kg. This Clutch Cover is 215mm (8.5") diameter and has a torque... READ MORE	£342.11 Ex VAT @ 20% £285.09	Currently unavailable
RTR1417-1EX CLICK FOR MORE INFO	CLUTCH COVER TR4A-7 DOUBLE DIAPHRAM H GRAD Revington TR information: Exchange TR4A-8 High grade diaphragm clutch cover 8.5" featuring a double diaphragm for maximum torque transmission. Pull off pressure 90-110kg. This cover is the highest torque transmitting cover we can offer before going to very expensive... READ MORE	£420.32 Ex VAT @ 20% £350.27
RTR1418 CLICK FOR MORE INFO	TR4A-6 CLUTCH PLATE HIGH GRADE ORGA Revington TR information: TR4A-6 Organic Centre Plate capable of transmitting 257NM (189ftlb) of torque when used with RTR1417, RTR1417EX or RTR1417-1EX. Suits 1.25" x 10 spline. This plate can also be used in TR2-4 where the flywheel has been... READ MORE	£266.70 Ex VAT @ 20% £222.25	Currently unavailable
RTR1090-1.25 CLICK FOR MORE INFO	CLUTCH PLATE CERAMETALIC TR4A-6 8.5" DIA Revington TR information: TR4A-6 Uprated Clutch Plate with standard type sprung hub but with cerametallic clutch material. suits 1.25" x 10 spline. Weight 1.7kg. Capable of transmitting 287NM (213ftlb) of torque when used with RTR1417 cover. Whilst the... READ MORE	£460.91 Ex VAT @ 20% £384.09	Currently unavailable
RTR1090-1.0 CLICK FOR MORE INFO	CLUTCH PLATE HIGH TORQUE 1" SPLINE 8.5" DIA Revington TR information: TR4A-6 Uprated clutch plate with standard type sprung hub but with cerametallic clutch material. suits 1.00" x 10 spline. Weight 1.7kg. Capable of transmitting 287NM (213ftlb) of torque when used with RTR1417. Whilst the hub... READ MORE	£461.32 Ex VAT @ 20% £384.43	Currently unavailable
GCC139EX CLICK FOR MORE INFO	CLUTCH COVER LAYCOCK 4A/6 RECON EX Revington TR information: Diaphragm Clutch Cover Assembly Exchange. A deposit will be charged until a reconditionable part is returned. Note that Laycock clutch parts are very difficult to find so an alternative detailed below may need to... READ MORE	£134.71 Ex VAT @ 20% £112.26	Currently unavailable
148402EX CLICK FOR MORE INFO	CLUTCH PLATE LAYCOCK TR4A/6 EXCH. Revington TR information: Diaphragm Clutch Driven Plate Exchange. A deposit will be charged until a reconditionable part is returned. This Laycock Clutch Driven Plate is not available new. Note that Laycock clutch parts are very difficult to find... READ MORE	£129.04 Ex VAT @ 20% £107.53	Currently unavailable
GCC228-1EX CLICK FOR MORE INFO	EXCHANGE LIGHT DUTY COVER TR4A-7 Revington TR information: Exchange TR4A-6 Diaphragm Clutch Cover suitable for light loads where the car is used for touring or casual use and a light feel to the clutch is important. Pull off pressure 55-65kg This cover can also... READ MORE	£120.89 Ex VAT @ 20% £100.74	Currently unavailable
GCC228 CLICK FOR MORE INFO	CLUTCH COVER TR4A-7 BORG & BECK Revington TR information: Diaphragm Clutch Cover Standard specification. Whist this part is available new, Revington TR can also offer an exchange part GCC228EX which is remanufactured to the original specification. This cover can also be used in TR2-4 where... READ MORE This item has a secondhand part available - see below	£155.90 Ex VAT @ 20% £129.92	Currently unavailable
GCC228SH	Second Hand CLUTCH COVER TR4A-7 BORG & BECK	£60.46 Ex VAT @ 20% £50.38
GCC228EX CLICK FOR MORE INFO	EXCHANGE CLUTCH COVER TR4A-7 BORG & BECK Revington TR information: Exchange TR4A-7 Diaphragm Clutch Cover suitable for normal and slightly uprated loads where the car is used for lively driving. Pull off pressure 66-80kg. This cover can also be used in TR2-4 where the flywheel has... READ MORE	£134.69 Ex VAT @ 20% £112.24
GCP143 CLICK FOR MORE INFO	CLUTCH PLATE TR4A-6 B&B Revington TR information: Whist this Driven Plate is available new, Revington TR prefer due to varying quality of newly manufactured parts, often having fewer rivets holding them together than were present in the original equipment, to supply an... READ MORE This item has a secondhand part available - see below	£122.28 Ex VAT @ 20% £101.90	Currently unavailable
GCP143SH CLICK FOR MORE INFO	Second Hand CLUTCH PLATE TR4A-6	£50.41 Ex VAT @ 20% £42.01
GCP143EX CLICK FOR MORE INFO	CLUTCH PLATE TR4A/6 RECON EXCH Revington TR information: Diaphragm Clutch Driven Plate Exchange, Borg and Beck type. A deposit will be charged until a reconditionable part is returned. Whist this driven plate is available new, Revington TR prefer this exchange part as quality of... READ MORE	£120.83 Ex VAT @ 20% £100.69
RTR1051 CLICK FOR MORE INFO	CLUTCH COVER UPRATED TR4A-7 Revington TR information: New clutch cover TR4A 6 uprated. Suitable for all fast road applications. Borg and Beck type 8.5"diameter, weight 4.8kg. The specification of this part is Torque capacity:224Nm (165lbs/ft) using driven plates RTR1052 or RTR1052EX Clamp load:... READ MORE	£392.20 Ex VAT @ 20% £326.83	Currently unavailable
RTR1051EX CLICK FOR MORE INFO	EXCHANGE COVER UPRATED TR4-7 Revington TR information: Exchange TR4A - 6 uprated clutch cover. Suitable for all fast road applications. Borg and Beck, weight 4.8kg. (Standard TR2 weighs 6.2kg), exchange. Every bit as good as the outright product, but cheaper. Pull off pressure... READ MORE	£241.67 Ex VAT @ 20% £201.39	Currently unavailable
RTR1052 CLICK FOR MORE INFO	CLUTCH PLATE UPRATED Revington TR information: New uprated clutch plate TR4A-6 uprated, Borg and Beck, type 8.5" diameter. Weight 1.4kg. The combination of this plate and cover RTR1051 works well for fast road/hillclimb, sprint and rally with power up to 150 BHP... READ MORE	£323.51 Ex VAT @ 20% £269.59	Currently unavailable
RTR1052EX CLICK FOR MORE INFO	CLUTCH PLATE UPRATED EXCHANGE Revington TR information: TR4A-6 uprated clutch plate, Borg and Beck. Weight 1.4kg. 8.5" (215mm) diameter. The combination of this plate and cover RTR1051 works well for fast road/hillclimb, sprint and rally with power up to 150 BHP at the... READ MORE	£164.42 Ex VAT @ 20% £137.02	Currently unavailable

Special Offer

AMMETER -60->+60 BLACK RIM