- Part Detail
- CLICK TO VIEW
TRIUMPH PLATES - Browse Original Triumph Catalogue Plates
DAMPER LEVER U/R TR2-4 L.H.
Part No:
RTR3119LEX
Price
£121.72
Price Ex VAT @ 20%
£101.43
Deposit *
£100.00
IN STOCK This part is immediately available
TR2-4 uprated lever arm Left Hand. A deposit applies as this part is supplied on an exchange basis ( see below for outsight purchase). Please be aware that there are many reproduction dampers around these days, the internals of which are decidedly suspect, needing to be sleeved to bring them up to suitable standard, which will affect the refund of your deposit.
This uprated damper uses revised valves and thicker oil.
Summary of Exchange policy
RTR3119LEX and RTR3119REX are supplied exchange or outright. If we supply this part on an exchange basis the deposit applied at the point of sale will be refunded when a reconditionable damper is returned.
Features that will render a damper not suitable for reconditioning, or will incur retention of some or all the deposit, include but are not limited to: -
Reproduction dampers, the internals of all we have seen are decidedly suspect, needing to be sleeved to bring them up to a suitable standard. If it does not say ARMSTRONG on the casing, expect to have part or all of your deposit retained.
Broken, bent or cracked casing or arm
Incorrect size mounting holes in arm or body
Seized or internally damaged units.
Incorrect size mounting holes in arm or body
Seized or internally damaged units.
If RTR3119LEX or RTR3119REX are supplied non exchange then the deposit mentioned above will not be refunded as an old unit will not be returned to us, so the total cost of the unit will be the unit cost plus the deposit cost which is displayed with this part number.
TR2-4 Rear Dampers are notoriously difficult to tighten up. The following cap screws and washers help to keep the Dampers tight, and ease assembly and removal.
SC606101 Cap Screw (4 required)
WP10612075 Washer (4 required)
Standard dampers are available new and exchange. See part numbers 202388, 202388EX and 202389, 202389EX
TR2-4 Rear Dampers are notoriously difficult to tighten up. The following cap screws and washers help to keep the Dampers tight, and ease assembly and removal.
SC606101 Cap Screw (4 required)
WP10612075 Washer (4 required)
Standard dampers are available new and exchange. See part numbers 202388, 202388EX and 202389, 202389EX