- Part Detail
- CLICK TO VIEW
TRIUMPH PLATES - Browse Original Triumph Catalogue Plates
LAMP BOWL LUCAS OE SCREW ON RIM
CURRENTLY UNAVAILABLE
TR4-6 bowl headlamp. This headlamp bowl is an original Lucas part of the two adjuster screw type and comes with a clip to allow fitment of a screw on type rim part number 500929 as fitted to TR2 and TR3.
Should you need to replace the clip order part number 37H7421A.
To convert the headlamp bowl to accommodate a clip on type rim 119072, please order fitting kit BAU1460TR.
Many TR2-3A which should have 3 adjuster type headlamp bowls, have been converted to this later type. However, if you require the original part, order 7H6838.
A cheaper non Lucas part is available too, SML3B along with a plastic type which is obviously less prone to rot. Order SML3P
Many types of Headlamp bowl were fitted from the inception of the TR2 to the final TR6 off the line. Even within one model many different headlamp variations were fitted, the TR4 listing 17! And of course cars will have been fitted with alternatives over the years. In principle though, the headlamp bowl comes as two basic types, the early 3 adjuster type and the later 2 adjuster type.
Ther adjusters for the later 2 adjuster type are available as a kit BHM7058
Electrical systems, Instruments etc.
16 plates in total
| Part No. | Description and Comments | Price | Add to Cart | |
|---|---|---|---|---|
 |
BAU1460TR |
CLIP-HEADLAMP RIM-CLIP ONRevington TR information: TR3A-6 rim attachment clip set for clip on headlamp outer rims. This kit of parts services one headlamp bowl therefore two are required per car. The kit can be used to repair bowls with damaged clips... READ MORE |
£7.67 Ex VAT @ 20% |
|
 |
37H7421A |
H/L/RIM CLIP SCREW TYPE TR2/3Revington TR information: TR2-3 rim attachment clip set screw on. |
£2.27 Ex VAT @ 20% |
|
|
7H6838 |
HEADLAMP BOWL 2 screw typeRevington TR information: TR2-3B bowl headlamp 3 adjuster type |
£23.57 Ex VAT @ 20% |
|
|
7H6838SH |
Second Hand HEADLAMP BOWL 3 screw type |
£16.94 Ex VAT @ 20% |
|
|
119072 |
HEADLAMP RIM TR3A-6 OE QUALITYThis item has been superceded by 119072B - see below |
||
|
119072B |
REPRO H/LAMP RIM snap onRevington TR information: These cheap rims may require some alteration to the securing clip to enable fitment. Alternatively use Lucas part 119072 |
£21.84 Ex VAT @ 20% |
|
|
SML3P |
LAMP BUCKET PLASTIC TR4/6Revington TR information: TR4-6 bowl plastic type headlamps. This headlamp bowl is plastic and is a kit of parts including the headlamp-retaining rim, gasket and wiring grommet. The parts are not individually interchangeable with the original parts, but fit... READ MORE |
£24.07 Ex VAT @ 20% |
|
|
SML3B |
LAMP BUCKET REPRODUCTIONRevington TR information: TR4-6 bowl headlamp. This headlamp bowl is a reproduction part of the two adjuster screw type and comes with a clip to allow fitment of a screw on type rim part number 500929 as fitted to... READ MORE |
£16.81 Ex VAT @ 20% |
|
|
BHM7058 |
LAMP-TRIMSCREW KITRevington TR information: TR4-6 adjuster kit. 2 screw type. Containes two screws, two ferrules, two springs and two clips. Two packs required per car |
£7.42 Ex VAT @ 20% |
|
|
BAU2110 |
LIGHT WIRE W/O PILOTRevington TR information: Loom and connector for sealed beam and Halogen H4 headlamps.
As this loom carries all the headlamp current, and it is common for heaver duty bulbs to be fitted these days, our looms are manufactured... READ MORE |
£18.71 Ex VAT @ 20% |
|
|
BAU2110SH |
Second Hand HEADLAMP WIRING HASRNESS |
£8.45 Ex VAT @ 20% |
|
|
500929 |
RIM HEADLAMP LUCASRevington TR information: Headlamp rim screw on type. If the retaining mechanism needs replacing order 37H7421A. We also have reproduction parts, Stainless Steel, lightweight aluminium and second hand parts.
The later push on rim is 119072
|
£22.78 Ex VAT @ 20% |
|
|
500929SH |
RIM HEADLAMP SECOND HAND |
£12.02 Ex VAT @ 20% |
