Choose Car Type


then
Search for parts
or
Browse for parts

Home  »  Suspension and steering  »  FRONT SUSPENSION  »  GENERAL FRONT SUSPENSION PARTS  »  UPPER INNER WISHBONE KIT TR2-6 no sleeve

UPPER INNER WISHBONE KIT TR2-6 no sleeve

Part No:
SPF0288AK
Price
£51.44
Price Ex VAT @ 20%
£42.87

IN STOCK This part is immediately available

Main
Main
1 image

TR2-6 Superpro polyurethane Upper inner bush kit. Halfway house between standard 102228 bush and 102228UK kit. One kit required per car. Can be used on TR2-4 lower inner too.

As well as TR2 this bush can be used in the lower inner in place of nylon on TR3-4 when a softer, less harsh feel is required. It will introduce some compliance in to the suspension that was not there before but is a halfway house choice and will give a slightly softer and less harsh feel.
For TR4A-6 lower link uprated and mid range bushes see below

Installation:
Make sure inside of the arm is completely cleaned out; no paint on the inside and the same for the fulcrum pin. The lubricant supplied must be used to enable the bush to be inserted into the arm. Use a vice and a large socket at the other end of the wishbone arm for the bush to expand into and wind the bush in. Once inserted the bush will elongate ensuring there will be no end float once assembled. The fulcrum pin will be a tight fit in the centre of the bush to ensure no play in operation and once again assembly must be completed with plenty of lubricant supplied.

Suspension and steering

To view the Triumph Catalogue Plates, please pick a car type