- Part Detail
- CLICK TO VIEW
TRIUMPH PLATES - Browse Original Triumph Catalogue Plates
ROD SEAL KIT
Part No:
SPF0334K
Price
£25.24
Price Ex VAT @ 20%
£21.03
IN STOCK This part is immediately available
![](https://www.revingtontr.com/images/no-product-image.jpg)
Boot, Track Rod End (TRE) universal. One kit contains 2 seals. If 4 seals are required you will need 2 kits.
Manufactured from SuperPro polyurethane this boot will give very long life as SuperPro polyurethane is far less likely to split than rubber. These boots are not a direct fit replacement for TR boots as they are a universal fit product, but will do the job. TR2-7 track rod ends can be rendered unserviceable simply for the need of a new gaiter (boot). If your ball joint is in serviceable condition but just needs a gaiter, then choose 17H3501 rubber gaiter or SPF0334K (TR2-6) or SPF0333K SuperPro Polyurethane gaiters (sold in pairs).
All 3 types of boot available from SuperPro, SPF332K, SPF333K and SPF334K have been checked by RevingtonTR against all TR types of TRE and Top Ball Joint (TBJ).
Conclusion
1. None of the boots are a particularly close fit to the TR ball joints but the following will doubtless work well in practice. There have been dozens of designs of TRE on the market over the years so one version might fit better than another
1.1 TR2 TRE use SPF0334K. Very tight but will stay on when articulated. Can also use SPF333K
1.2 TR4-6 TRE use SPF0334K Very tight but will stay on when articulated, Can also use SPF333K
1.3 TR7 TRE use SPF0332K Slightly loose but will stay on.
2. None of the 3 available boots fit TR TBJ.
3. The disadvantage with these boots is they have no inner lip to locate in the groove hence them being tested for slipping off where our findings showed that technically the boots are less than perfect with no inner lip, in practice when packed with grease they work.