Choose Car Type


then
Search for parts
or
Browse
for parts

WASHER SPRING 3/8

Part No:
WL0209

This part appears on the following Triumph Catalogue Plates

Car Type Plate Plate Title Plate No. Triumph Part Description No per Unit
TR2 N FRONT SUSPENSION AND FRONT HUBS. N1D Washer, spring, on bolt and screw 8
TR2 M CHASSIS FRAME. M8B Washer, spring, on bolt 6
TR2 M CHASSIS FRAME. M9D Washer, spring, on screw 4
TR2 N FRONT SUSPENSION AND FRONT HUBS. N76A Washer, spring, under nut 8
TR2 N FRONT SUSPENSION AND FRONT HUBS. N77C Washer, under nut 4
TR2 A ENGINE: CYLINDER BLOCK AND HEAD A67 Washer, spring, under nut
Used with steel Rocker Pedestals only. Use WP009 with aluminium Rocker Pedestals
4
TR2 D ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS. D23A Washer, spring, under nut, 8
TR2 D ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS. D23A Washer, spring, under nut, 8
TR2 D ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS. D23A Washer, spring, under nut, 8
TR2 Z ELECTRICAL EQUIPMENT: DYNAMO, STARTER MOTOR AND STARTER SOLENOID. Z26I Washer, spring, under nut 2
TR2 AF BODY AND FITTINGS: BODY COMPLETE AND BODY MOUNTINGS. AF7B Washer, spring, on screw 4
TR2 G ENGINE: 1-1/2" SU CARBURETTORS. G85C Washer, spring, under nut
From Engine No. 1
4
TR2 Q REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. Q10A Washer, spring, under nut 4
TR2 Q REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. Q10A Washer, spring, under nut 4
TR2 Q REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. Q19A Washer, spring, under nut 2
TR2 Q REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. Q19A Washer, spring, under nut 2
TR2 Q REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. Q22A Washer, spring, under nut 4
TR2 Q REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. Q22A Washer, spring, under nut 4
TR2 R STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. R28F Washer, spring, on bolts 2
TR2 AJ BODY AND FITTINGS: MEDALLION, GRILL, BONNET AND BONNET FASTENER DETAILS. AJ18 Washer, spring, under nut
From Comm. No. TS1 to Comm. No. TS4228
2
TR2 R STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. R35C Washer, spring, on bolt 2
TR2 T PEDALS: ACCELERATOR, CLUTCH AND BRAKE. T32 Washer, spring, on screws 2
TR2 U MASTER CYLINDER: TWIN AND LATE SEPARATE CYLINDERS WITH RESERVOIR U31 Washer, spring, under nuts
From Comm. No. TS1 to 13045
2
TR2 C ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated). C21 Washer, spring, under nut 2
TR2 C ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated). C25 Washer, spring, under nut 3
TR2 V BRAKE UNIT: FRONT AND REAR, LOCKHEED AND GIRLING. V66 Washer, spring, Friction disc to front hub
From Comm. No. TS13046 to commission number TS56376 Wire Wheels and TS56383 Disc Wheels only.
8
TR2 V BRAKE UNIT: FRONT AND REAR, LOCKHEED AND GIRLING. V90 Washer, spring, Friction disc to front hub
With Wire Wheels 56377 With Disc Wheels 56384
8
TR2 W HYDRAULIC PIPES, PETROL PIPES, PETROL TANK AND SENDER UNIT. W30B Washer, spring, on setscrews 4
TR2 AS BODY AND FITTINGS: FRONT BUMPER AND REAR OVERRIDERS, MISCELLANEOUS BODY DETAILS. AS15 Washer, spring, under nut
From Comm. No. TS1 to Comm. No. TS22013
4
TR2 AS BODY AND FITTINGS: FRONT BUMPER AND REAR OVERRIDERS, MISCELLANEOUS BODY DETAILS. AS15AB Washer, lock, on bolt
From Comm. No. TS22014
1
TR2 AS BODY AND FITTINGS: FRONT BUMPER AND REAR OVERRIDERS, MISCELLANEOUS BODY DETAILS. AS15AF Washer, lock, on bolt
From Comm. No. TS22014
3
TR2 AS BODY AND FITTINGS: FRONT BUMPER AND REAR OVERRIDERS, MISCELLANEOUS BODY DETAILS. AS27 Washer, spring, under nut
TR2 P REAR AXLE: EARLY 'LOCKHEED' TYPE 4 BOLT MOUNTING. P8 Washer, lock
From Comm. No. TS1 to Comm. No. TS13045
4
TR2 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X2B Washer, spring, under nut
From Comm. No. TS1
3
TR2 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X2B Washer, spring, under nut
From Comm. No. TS1
3
TR2 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X37 Washer, spring, on setscrew 2
TR2 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X37 Washer, spring, on setscrew 2
TR2 PS REAR AXLE: LATE 'GIRLING TYPE' 6 BOLT MOUNTING. PS3 Washer, lock
From Comm. No. TS13046
4
TR3 N FRONT SUSPENSION AND FRONT HUBS. N1D Washer, spring, on bolt and screw 8
TR3 M CHASSIS FRAME. M8B Washer, spring, on bolt 6
TR3 M CHASSIS FRAME. M9D Washer, spring, on screw 4
TR3 N FRONT SUSPENSION AND FRONT HUBS. N76A Washer, spring, under nut 8
TR3 N FRONT SUSPENSION AND FRONT HUBS. N77C Washer, under nut 4
TR3 A ENGINE: CYLINDER BLOCK AND HEAD A67 Washer, spring, under nut
Used with steel Rocker Pedestals only. Use WP009 with aluminium Rocker Pedestals
4
TR3 D ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS. D23A Washer, spring, under nut, 8
TR3 D ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS. D23A Washer, spring, under nut, 8
TR3 D ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS. D23A Washer, spring, under nut, 8
TR3 Z ELECTRICAL EQUIPMENT: DYNAMO, STARTER MOTOR AND STARTER SOLENOID. Z26I Washer, spring, under nut 2
TR3 AF BODY AND FITTINGS: BODY COMPLETE AND BODY MOUNTINGS. AF7B Washer, spring, on screw 4
TR3 G ENGINE: 1-1/2" SU CARBURETTORS. G85C Washer, spring, under nut
From Engine No. 1
4
TR3 Q REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. Q10A Washer, spring, under nut 4
TR3 Q REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. Q10A Washer, spring, under nut 4
TR3 Q REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. Q19A Washer, spring, under nut 2
TR3 Q REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. Q19A Washer, spring, under nut 2
TR3 Q REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. Q22A Washer, spring, under nut 4
TR3 Q REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. Q22A Washer, spring, under nut 4
TR3 R STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. R28F Washer, spring, on bolts 2
TR3 AJ BODY AND FITTINGS: MEDALLION, GRILL, BONNET AND BONNET FASTENER DETAILS. AJ18 Washer, spring, under nut
From Comm. No. TS1 to Comm. No. TS4228
2
TR3 R STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. R35C Washer, spring, on bolt 2
TR3 T PEDALS: ACCELERATOR, CLUTCH AND BRAKE. T32 Washer, spring, on screws 2
TR3 U MASTER CYLINDER: TWIN AND LATE SEPARATE CYLINDERS WITH RESERVOIR U31 Washer, spring, under nuts
From Comm. No. TS1 to 13045
2
TR3 C ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated). C21 Washer, spring, under nut 2
TR3 C ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated). C25 Washer, spring, under nut 3
TR3 V BRAKE UNIT: FRONT AND REAR, LOCKHEED AND GIRLING. V66 Washer, spring, Friction disc to front hub
From Comm. No. TS13046 to commission number TS56376 Wire Wheels and TS56383 Disc Wheels only.
8
TR3 V BRAKE UNIT: FRONT AND REAR, LOCKHEED AND GIRLING. V90 Washer, spring, Friction disc to front hub
With Wire Wheels 56377 With Disc Wheels 56384
8
TR3 X BRAKE UNIT: FRONT CALIPERS AND REAR DRUMS. X17 Washer, spring Friction disc to front hub 8
TR3 W HYDRAULIC PIPES, PETROL PIPES, PETROL TANK AND SENDER UNIT. W30B Washer, spring, on setscrews 4
TR3 AS BODY AND FITTINGS: FRONT BUMPER AND REAR OVERRIDERS, MISCELLANEOUS BODY DETAILS. AS15 Washer, spring, under nut
From Comm. No. TS1 to Comm. No. TS22013
4
TR3 AS BODY AND FITTINGS: FRONT BUMPER AND REAR OVERRIDERS, MISCELLANEOUS BODY DETAILS. AS15AB Washer, lock, on bolt
From Comm. No. TS22014
1
TR3 AS BODY AND FITTINGS: FRONT BUMPER AND REAR OVERRIDERS, MISCELLANEOUS BODY DETAILS. AS15AF Washer, lock, on bolt
From Comm. No. TS22014
3
TR3 AS BODY AND FITTINGS: FRONT BUMPER AND REAR OVERRIDERS, MISCELLANEOUS BODY DETAILS. AS27 Washer, spring, under nut
TR3 P REAR AXLE: EARLY 'LOCKHEED' TYPE 4 BOLT MOUNTING. P8 Washer, lock
From Comm. No. TS1 to Comm. No. TS13045
4
TR3 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X2B Washer, spring, under nut
From Comm. No. TS1
3
TR3 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X2B Washer, spring, under nut
From Comm. No. TS1
3
TR3 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X37 Washer, spring, on setscrew 2
TR3 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X37 Washer, spring, on setscrew 2
TR3 PS REAR AXLE: LATE 'GIRLING TYPE' 6 BOLT MOUNTING. PS3 Washer, lock
From Comm. No. TS13046
4
TR4 Z EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. Z2B Washer, lock Exhaust pipe to manifold 3
TR4 Z EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. Z2B Washer, lock Exhaust pipe to manifold 3
TR4 Z EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. Z2B Washer, lock Exhaust pipe to manifold 3
TR4 N CHASSIS FRAME AND RADIATOR SKID SHIELD. N20 Washer, lock Cross-member to chassis frame 2
TR4 N CHASSIS FRAME AND RADIATOR SKID SHIELD. N23 Washer, lock Cross-tube to chassis frame 6
TR4 N CHASSIS FRAME AND RADIATOR SKID SHIELD. N31 Washer, lock Cross-member to mounting brackets 4
TR4 Z EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. Z39 Washer, spring Radiator to chassis frame 2
TR4 Z EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. Z39 Washer, spring Radiator to chassis frame 2
TR4 Z EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. Z39 Washer, spring Radiator to chassis frame 2
TR4 A ENGINE: CYLINDER BLOCK AND HEAD. A37 Washer, lock Mounting to engine plate and frame 4
TR4 A ENGINE: CYLINDER BLOCK AND HEAD. A76 Washer, lock pedestal to combustion head
Fitted up to Engine No. CT6039E only with steel Rocker Pedestals. Use WP009 with aluminium Rocker Pedestals
4
TR4 E ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS. E26 Washer, lock Inlet and exhaust manifolds to cylinder head 8
TR4 E ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS. E26 Washer, lock Inlet and exhaust manifolds to cylinder head 8
TR4 E ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS. E26 Washer, lock Inlet and exhaust manifolds to cylinder head 8
TR4 AB ELECTRICAL EQUIPMENT: DYNAMO, STARTER MOTOR AND STARTER SOLENOID. AB26E Washer, lock Starter motor attachment 2
TR4 AH BODY AND FITTINGS: BODY COMPLETE AND BODY MOUNTINGS. AH11 Washer, lock Body mounting, front side brace member attachment 2
TR4 C ENGINE: WATER PUMP ASSEMBLY. C21 Washer, lock Securing bearing housing 2
TR4 C ENGINE: WATER PUMP ASSEMBLY. C25 Washer, spring Pump to cylinder block 3
TR4 S REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. S11 Washer, spring, under nut 4
TR4 S REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. S11 Washer, spring, under nut 4
TR4 S REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. S22 Washer, lock Rear shock absorber link to arm 2
TR4 S REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. S22 Washer, lock Rear shock absorber link to arm 2
TR4 S REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. S27 Washer, lock Check strap to frame
Fitted up to CT23382
4
TR4 S REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS. S27 Washer, lock Check strap to frame
Fitted up to CT23382
4
TR4 W CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS AND SUPPORT BRACKET. W7 Washer, spring Shaft to bracket 2
TR4 X BRAKE UNIT: FRONT CALIPERS AND REAR DRUMS. X17 Washer, spring Friction disc to front hub 8
TR4 P FRONT SUSPENSION AND FRONT HUBS. P1D Washer, spring Top inner fulcrum pin to chassis frame 8
TR4 P FRONT SUSPENSION AND FRONT HUBS. P1D Washer, spring Top inner fulcrum pin to chassis frame 8
TR4 P FRONT SUSPENSION AND FRONT HUBS. P86 Washer, lock Fulcrum and abutment brackets to spring pan 8
TR4 P FRONT SUSPENSION AND FRONT HUBS. P86 Washer, lock Fulcrum and abutment brackets to spring pan 8
TR4 AW BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. AW18 Washer, lock Support brackets to chassis 4
TR4 AW BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. AW40 Washer, lock Bumper to outer brackets 2
TR4 AW BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. AW45 Washer, lock Bumper and overlders to inner brackets 2
TR4 AW BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. AW49 Washer, lock Outer and Inner brackets to chassis 4
TR4 AW BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. AW60 Washer, lock Bumper to side panels and outriggers
Fitted up to Commission No. CT2842 R.H.S., and CT3018 L.H.S. only
6
TR4 AW BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. AW69 Washer, lock Tie rods to chassis 2
TR4 R REAR AXLE R3 Washer, lock Bearing cap to casing 4
TR4A A 83 m.m. and 86 m.m. ENGINE: BLOCK AND HEAD A37 Washer, lock Mounting to engine plate and frame 4
TR4A C 83 m.m. and 86 m.m. ENGINE: WATER PUMP ASSEMBLY. C21 Washer, lock Securing bearing housing 2
TR4A C 83 m.m. and 86 m.m. ENGINE: WATER PUMP ASSEMBLY. C25 Washer, spring, Pump to cylinder block 3
TR4A E 83 m.m. and 86 m.m. ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS. E25 Washer, lock Inlet and exhaust manifolds to cylinder head 8
TR4A E 83 m.m. and 86 m.m. ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS. E25 Washer, lock Inlet and exhaust manifolds to cylinder head 8
TR4A E 83 m.m. and 86 m.m. ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS. E25 Washer, lock Inlet and exhaust manifolds to cylinder head 8
TR4A T INDEPENDENT REAR AXLE: DIFFERENTIAL UNIT, REAR AXLE SHAFTS AND HUB UNITS. T13 Washer, lock Bearing caps to hypoid housing 4
TR4A R CHASSIS FRAME AND RADIATOR PROTECTION SHIELD. R30 Washer, lock Shield attachments 2
TR4A R CHASSIS FRAME AND RADIATOR PROTECTION SHIELD. R34 Washer, lock Cross tube to chassis frame 4
TR4A R CHASSIS FRAME AND RADIATOR PROTECTION SHIELD. R37 Washer, lock Crossmember to mounting bracket 4
TR4A U RIGID REAR AXLE. U4 Washer, lock Bearing cap to casing 4
TR4A S FRONT SUSPENSION AND FRONT HUBS. S2B Washer, spring Top inner fulcrum pin to chassis frame 8
TR4A S FRONT SUSPENSION AND FRONT HUBS. S2B Washer, spring Top inner fulcrum pin to chassis frame 8
TR4A S FRONT SUSPENSION AND FRONT HUBS. S87 Washer, lock Fulcrum brackets to spring pan 8
TR4A S FRONT SUSPENSION AND FRONT HUBS. S87 Washer, lock Fulcrum brackets to spring pan 8
TR4A W RIGID REAR SUSPENSION. W13 Washer, spring, under nut 4
TR4A W RIGID REAR SUSPENSION. W31 Washer, lock Buffer to chassis frame bracket 1
TR4A AB CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS AND SUPPORT BRACKET. AB7 Washer, spring Shaft to bracket 2
TR4A AC BRAKE UNIT: FRONT CALIPERS AND REAR DRUMS. AC16 Washer, spring Friction disc to front hub 8
TR4A AF EXHAUST SYSTEM: INTERMEDIATE AND TWIN REAR SILENCER TYPE. AF4 Washer, lock Exhaust pipes to manifold
Fitted up to Comm. No only
4
TR4A AFS EXHAUST SYSTEM: SINGLE REAR TRANSVERSE SILENCER TYPE. AFS4 Washer, lock
Fitted from Comm. No and future
4
TR4A AJ ELECTRICAL EQUIPMENT: DYNAMO, STARTER MOTOR AND STARTER SOLENOID. AJ26E Washer, lock Starter motor attachment 2
TR4A AQ BODY AND FITTINGS: BODY COMPLETE, BODY MOUNTINGS. AQ4 Washer, lock Body mounting, front
Fitted from Comm. No. CTC57151 and future
2
TR4A AQ BODY AND FITTINGS: BODY COMPLETE, BODY MOUNTINGS. AQ4D Washer, lock Body mounting, front
Fitted from Comm. No. CTC57151 and future
2
TR4A AQ BODY AND FITTINGS: BODY COMPLETE, BODY MOUNTINGS. AQ11 Washer, lock Body mounting front side brace member attachment 2
TR4A BD BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. BD20 Washer, lock Support brackets to chassis 4
TR4A BD BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. BD33 Washer, lock Bumper to outer brackets 2
TR4A BD BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. BD38 Washer, lock Bumper and overiders to inner brackets 2
TR4A BD BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. BD42 Washer, lock brackets Outer and inner to chassis 4
TR4A BD BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. BD63 Washer, lock Tie rods to chassis 2
TR250 Q CHASSIS FRAME Q32 Washer, lock - Securing shield 2
TR250 Q CHASSIS FRAME Q35 Washer, lock - Cross tube to chassis frame 6
TR250 Q CHASSIS FRAME Q38 Washer, lock - Crossmember to mounting brackets 4
TR250 A ENGINE: External A58C Washer, lock - Mounting bracket to cylinder block 8
TR250 R FRONT SUSPENSION R1B Washer, lock - Top inner fulcrum pin to chassis frame 8
TR250 R FRONT SUSPENSION R85 Washer, lock - Fulcrum brackets to spring pan 8
TR250 E ENGINE: Manifolds E17 Washer, lock - Securing manifolds 10
TR250 E ENGINE: Manifolds E17 Washer, lock - Securing manifolds 10
TR250 E ENGINE: Manifolds E17 Washer, lock - Securing manifolds 10
TR250 AQ BODY FITTINGS: Body Shell to Chassis Mountings AQ4 Washer, lock - Body mounting front 2
TR250 AQ BODY FITTINGS: Body Shell to Chassis Mountings AQ12 Washer, lock - Body mounting side brace member attachment 2
TR250 AG ELECTRICAL EQUIPMENT: Starter Motor and Solenoid Switch AG19H Washer, lock - Starter motor attachments 2
TR250 Z BRAKES Z16 Washer, spring - Friction disc to front hub 8
TR250 BC BODY AND FITTINGS: Bumpers BC20 Washer, lock - Support brackets to chassis 4
TR250 BC BODY AND FITTINGS: Bumpers BC33 Washer, lock - Bumper to outer brackets 2
TR250 BC BODY AND FITTINGS: Bumpers BC38 Washer, lock - Bumper and overriders to inner brackets 2
TR250 BC BODY AND FITTINGS: Bumpers BC63 Washer, lock - Tie rods to chassis 2
TR250 S INDEPENDENT REAR AXLE S19 Washer, lock - Bearing caps to hypoid housing 4
TR250 AC EXHAUST SYSTEM AC4 Washer - Exhaust pipe to manifold 3
TR5 Q FRONT SUSPENSION AND FRONT HUBS Q1B Washer, lock Top inner fulcrum pin to chassis frame 8
TR5 P CHASSIS FRAME AND RADIATOR PROTECTION SHIELD P32 Washer, lock Securing shield 2
TR5 P CHASSIS FRAME AND RADIATOR PROTECTION SHIELD P35 Washer, lock Cross tube to chassis frame 6
TR5 P CHASSIS FRAME AND RADIATOR PROTECTION SHIELD P38 Washer, lock Crossmember to mounting brackets 4
TR5 A ENGINE: ENGINE UNIT COMPLETE, GASKET SETS, CYLINDER BLOCK, FRONT AND REAR PLATES AND OIL PUMP A62C Washer, lock Mounting bracket to cylinder block 8
TR5 Q FRONT SUSPENSION AND FRONT HUBS Q85 Washer, lock Fulcrum bracket to spring pan 8
TR5 E ENGINE: INLET AND EXHAUST MANIFOLDS. HEATER PIPE E30 Washer, lock Securing manifolds 10
TR5 E ENGINE: INLET AND EXHAUST MANIFOLDS. HEATER PIPE E30 Washer, lock Securing manifolds 10
TR5 E ENGINE: INLET AND EXHAUST MANIFOLDS. HEATER PIPE E30 Washer, lock Securing manifolds 10
TR5 AR BODY AND FITTINGS: COMPLTE BODY AND BODY MOUNTINGS AR4 Washer, lock Body mounting front 2
TR5 AR BODY AND FITTINGS: COMPLTE BODY AND BODY MOUNTINGS AR12 Washer, lock Body mounting side brace member attachmant 2
TR5 G ENGINE: AIR MANIFLOLD AND AIR CLEANER ASSEMBLIES G8 Washer, lock Stay to cylinder block 2
TR5 AH ELECTRICAL EQUIPMENT: STARTER MOTOR AH25C Washer, lock Starter motor attachments 2
TR5 Y BRAKES: FRONT CALIPERS AND REAR DRUMS Y16 Washer Spring Friction disc to front hub 8
TR5 AB PETROL SYSTEM: PETROL TANK, FILLER CAP, GUAGE UNIT, FUEL FILTER ASSEMBLY, PETROL PUMP AND PETROL PIPES AB25 Washer, lock Petrol filter to spare wheel pan 2
TR5 AB PETROL SYSTEM: PETROL TANK, FILLER CAP, GUAGE UNIT, FUEL FILTER ASSEMBLY, PETROL PUMP AND PETROL PIPES AB25 Washer, lock Petrol filter to spare wheel pan 2
TR5 BD BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS BD20 Washer, lock Support brackets to chassis 4
TR5 BD BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS BD33 Washer, lock Bumper to outer brackets 2
TR5 BD BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS BD38 Washer, lock Bumper and overriders to inner brackets 2
TR5 BD BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS BD42 Washer, lock Outer and inner brackets to chassis 4
TR5 BD BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS BD63 Washer, lock Tie rods to chassis 2
TR5 R INDEPENDENT REAR AXLE: DIFFERENTIAL UNIT, REAR AXLE SHAFTS AND HUB UNITS R15 Washer, lock Bearing caps to hypoid housing 4
TR5 AC EXHAUST SYSTEM AND MOUNTINGS AC4 Washer, lock Exhaust pipe to manifold 4
TR6CP AB CHASSIS FRAME AB32 WASHER, lock - Securing shield 2
TR6CP AB CHASSIS FRAME AB35 WASHER, lock - Cross tube to chassis frame 6
TR6CP AB CHASSIS FRAME AB38 WASHER, lock - Crossmember to mounting brackets 4
TR6CP N ENGINE (Petrol Injection Model): Block and Sump N71 WASHER, lock - Mounting bracket to cylinder block 6
TR6CP AC FRONT SUSPENSION AC85 WASHER, lock - Fulcrum brackets to spring pan 8
TR6CP CH ACCESSORIES WASHER, lock, clamp plate to chassis frame 4
TR6CP CH ACCESSORIES WASHER, lock, clamp plate to chassis frame 4
TR6CP AH STEERING AH11J WASHER, lock - Clamp to locating plate
Fitted on petrol injection models only
2
TR6CP U ENGINE (Petrol Injection Model): Air Manifold and Cleaner U9 WASHER, lock - Stay to cylinder block 2
TR6CP BH BODY AND FITTINGS: Body Shell Complete and Mounting BH4 WASHER, lock - Body mounting front 2
TR6CP BH BODY AND FITTINGS: Body Shell Complete and Mounting BH12 WASHER, lock - Body mounting side brace member attachment 2
TR6CP S ENGINE (Petrol Injection Model): Manifolds and Heater Pipe S30 WASHER, lock - Securing manifolds 10
TR6CP S ENGINE (Petrol Injection Model): Manifolds and Heater Pipe S30 WASHER, lock - Securing manifolds 10
TR6CP S ENGINE (Petrol Injection Model): Manifolds and Heater Pipe S30 WASHER, lock - Securing manifolds 10
TR6CP AS PETROL SYSTEM (PETROL INJECTION MODEL) AS25 WASHER, lock - Petrol filter to spare wheel pan 2
TR6CP AS PETROL SYSTEM (PETROL INJECTION MODEL) AS25 WASHER, lock - Petrol filter to spare wheel pan 2
TR6CP AZ ELECTRICAL EQUIPMENT: Starter Motor AZ25C WASHER, lock - Starter motor attachments 2
TR6CP AZ ELECTRICAL EQUIPMENT: Starter Motor AZ25W WASHER, lock Attachments 2
TR6CP Z GEARBOX: External Z71J WASHER, lock - Gearbox to engine attachment 2
TR6CP AN BRAKES AN16 WASHER, spring - Friction disc to front hub 8
TR6CP BV BODY AND FITTINGS: Bumpers BV10 WASHER, lock - Securing front bumper centre and support brackets
Fitted up to Comm. No. CF1
2
TR6CP BV BODY AND FITTINGS: Bumpers BV15 WASHER, lock - Front bumper support bracket assemblies to chassis
Fitted up to Comm. No. CF1
4
TR6CP BV BODY AND FITTINGS: Bumpers BV32 WASHER, lock — Rear bumper support brackets to chassis 4
TR6CP BV BODY AND FITTINGS: Bumpers BV39B WASHER, lock - securing bumper to side bracket 2
TR6CP AE INDEPENDENT REAR AXLE AE15 WASHER, lock - Bearing caps to hypoid housing 4
TR6CP AU EXHAUST SYSTEM (PETROL INJECTION MODEL) AU4 WASHER, lock - Exhaust pipe to manifold 4
TR6CC AB CHASSIS FRAME AB32 WASHER, lock - Securing shield 2
TR6CC AB CHASSIS FRAME AB35 WASHER, lock - Cross tube to chassis frame 6
TR6CC AB CHASSIS FRAME AB38 WASHER, lock - Crossmember to mounting brackets 4
TR6CC A ENGINE (Carburettor Model): Block and Sump A66 WASHER, lock -Mounting bracket to cylinder block 8
TR6CC AC FRONT SUSPENSION AC85 WASHER, lock - Fulcrum brackets to spring pan 8
TR6CC CH ACCESSORIES WASHER, lock, clamp plate to chassis frame 4
TR6CC CH ACCESSORIES WASHER, lock, clamp plate to chassis frame 4
TR6CC E ENGINE (Carburettor Model): Manifold E16 WASHER, lock - Securing manifolds 10
TR6CC E ENGINE (Carburettor Model): Manifold E16 WASHER, lock - Securing manifolds 10
TR6CC AH STEERING AH11J WASHER, lock - Clamp to locating plate
Fitted on petrol injection models only
2
TR6CC BH BODY AND FITTINGS: Body Shell Complete and Mounting BH4 WASHER, lock - Body mounting front 2
TR6CC BH BODY AND FITTINGS: Body Shell Complete and Mounting BH12 WASHER, lock - Body mounting side brace member attachment 2
TR6CC AZ ELECTRICAL EQUIPMENT: Starter Motor AZ25C WASHER, lock - Starter motor attachments 2
TR6CC AZ ELECTRICAL EQUIPMENT: Starter Motor AZ25W WASHER, lock Attachments 2
TR6CC Z GEARBOX: External Z71J WASHER, lock - Gearbox to engine attachment 2
TR6CC AN BRAKES AN16 WASHER, spring - Friction disc to front hub 8
TR6CC BV BODY AND FITTINGS: Bumpers BV10 WASHER, lock - Securing front bumper centre and support brackets
Fitted up to Comm. No. CF1
2
TR6CC BV BODY AND FITTINGS: Bumpers BV15 WASHER, lock - Front bumper support bracket assemblies to chassis
Fitted up to Comm. No. CF1
4
TR6CC BV BODY AND FITTINGS: Bumpers BV32 WASHER, lock — Rear bumper support brackets to chassis 4
TR6CC BV BODY AND FITTINGS: Bumpers BV39B WASHER, lock - securing bumper to side bracket 2
TR6CC AE INDEPENDENT REAR AXLE AE15 WASHER, lock - Bearing caps to hypoid housing 4
TR6CC AT EXHAUST SYSTEM (CARBURETTOR MODEL) AT4 WASHER - Exhaust pipe to manifold
ALL MARKETS up to Comm. No. CC67893
3
TR6CC AT EXHAUST SYSTEM (CARBURETTOR MODEL) AT27D WASHER, lock, exhaust pipe to manifold
ALL MARKETS from Comm. No. CC75001
4
TR6CR 21-01 CHASSIS 32 WASHER, lock - Securing shield 2
TR6CR 21-01 CHASSIS 35 WASHER, lock - Cross tube to chassis frame 6
TR6CR 21-01 CHASSIS 38 WASHER, lock - Crossmember to mounting brackets 4
TR6CR 20-52 ENGINE (P.I. MODELS) 20-52 WASHER SPRING 3/8" RECT SECTION 2
TR6CR 20-52 ENGINE (P.I. MODELS) 20-52 WASHER SPRING 3/8" RECT SECTION 2
TR6CF 21-01 CHASSIS 32 WASHER, lock - Securing shield 2
TR6CF 21-01 CHASSIS 35 WASHER, lock - Cross tube to chassis frame 6
TR6CF 21-01 CHASSIS 38 WASHER, lock - Crossmember to mounting brackets 4
TRI U MASTER CYLINDER: TWIN AND LATE SEPARATE CYLINDERS WITH RESERVOIR U31 Washer, spring, under nuts
From Comm. No. TS1 to 13045
2
TRS U MASTER CYLINDER: TWIN AND LATE SEPARATE CYLINDERS WITH RESERVOIR U31 Washer, spring, under nuts
From Comm. No. TS1 to 13045
2

To view the Triumph Catalogue Plates, please pick a car type