Choose Car Type


then
Search for parts
or
Browse for parts

 

WASHER

Part No:
WP0008

NOT AVAILABLE This part is no longer available

This part appears on the following Triumph Catalogue Plates

Car Type Plate Plate Title Plate No. Triumph Part Description No per Unit
TR2 A ENGINE: CYLINDER BLOCK AND HEAD A80A Washer, plain, under nut 2
TR2 G ENGINE: 1-1/2" SU CARBURETTORS. G82 Washer, plain, between lever and split pin
From Engine No. 1		 1
TR2 JA ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). J9 Washer, plain Dynamo to bracket rear as req'd.
TR2 JA ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). J9 Washer, plain Dynamo to bracket rear as req'd.
TR2 R STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. R31A Washer, plain, on bolt
From Comm. No. TS1		 1
TR2 R STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. R31AO Washer, plain I
TR2 GS ENGINE: 1-3/4" SU CARBURETTORS. GS80 Washer, plain, between lever and split pin
From Engine No. 8997E		 1
TR2 T PEDALS: ACCELERATOR, CLUTCH AND BRAKE. T35 Washer, plain, between spring washer and cotter pin
From Comm. No. TS1		 2
TR2 C ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated). C26L Washer, plain, dynamo to bracket
From Engine No. 10346E		 A/R
TR2 C ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated). C26U Washer, plain, on setscrew
From Engine No. 1		 1
TR2 AN BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. AN14 Washer, plain, under nut 2
TR2 AN BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. AN14 Washer, plain, under nut 2
TR2 AN BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. AN14 Washer, plain, under nut 2
TR2 S HANDBRAKE: LEVER, CABLES AND COMPENSATOR. S26 Washer, plain, between cotter pin and fork-end 1
TR2 S HANDBRAKE: LEVER, CABLES AND COMPENSATOR. S47 Washer, plain, between cotter pin and fork-end 2
TR2 K GEARBOX: CASING, TOP COVER AND MOUNTING. K13 Washer, plain, on screws
From Comm. No. TS1		 2
TR2 W HYDRAULIC PIPES, PETROL PIPES, PETROL TANK AND SENDER UNIT. W26AH Washer, plain, under nut
From Comm. No. TS13046		 1
TR2 AW OVERDRIVE UNIT DETAILS. AW45 Washers, plain, on setscrew 2
TR2 AW OVERDRIVE UNIT DETAILS. AW45 Washers, plain, on setscrew 2
TR2 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X17B Washer, plain, on bolt 2
TR2 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X17B Washer, plain, on bolt 2
TR2 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X20A Washer, plain, on bolt 2
TR2 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X20A Washer, plain, on bolt 2
TR3 A ENGINE: CYLINDER BLOCK AND HEAD A80A Washer, plain, under nut 2
TR3 G ENGINE: 1-1/2" SU CARBURETTORS. G82 Washer, plain, between lever and split pin
From Engine No. 1		 1
TR3 JA ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). J9 Washer, plain Dynamo to bracket rear as req'd.
TR3 JA ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). J9 Washer, plain Dynamo to bracket rear as req'd.
TR3 R STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. R31A Washer, plain, on bolt
From Comm. No. TS1		 1
TR3 R STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. R31AO Washer, plain I
TR3 GS ENGINE: 1-3/4" SU CARBURETTORS. GS80 Washer, plain, between lever and split pin
From Engine No. 8997E		 1
TR3 T PEDALS: ACCELERATOR, CLUTCH AND BRAKE. T35 Washer, plain, between spring washer and cotter pin
From Comm. No. TS1		 2
TR3 C ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated). C26L Washer, plain, dynamo to bracket
From Engine No. 10346E		 A/R
TR3 C ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated). C26U Washer, plain, on setscrew
From Engine No. 1		 1
TR3 AN BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. AN14 Washer, plain, under nut 2
TR3 AN BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. AN14 Washer, plain, under nut 2
TR3 AN BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. AN14 Washer, plain, under nut 2
TR3 S HANDBRAKE: LEVER, CABLES AND COMPENSATOR. S26 Washer, plain, between cotter pin and fork-end 1
TR3 S HANDBRAKE: LEVER, CABLES AND COMPENSATOR. S47 Washer, plain, between cotter pin and fork-end 2
TR3 K GEARBOX: CASING, TOP COVER AND MOUNTING. K13 Washer, plain, on screws
From Comm. No. TS1		 2
TR3 W HYDRAULIC PIPES, PETROL PIPES, PETROL TANK AND SENDER UNIT. W26AH Washer, plain, under nut
From Comm. No. TS13046		 1
TR3 AW OVERDRIVE UNIT DETAILS. AW45 Washers, plain, on setscrew 2
TR3 AW OVERDRIVE UNIT DETAILS. AW45 Washers, plain, on setscrew 2
TR3 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X17B Washer, plain, on bolt 2
TR3 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X17B Washer, plain, on bolt 2
TR3 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X20A Washer, plain, on bolt 2
TR3 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X20A Washer, plain, on bolt 2
TR4 Z EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. Z11 Washer, plain Silencer to tail pipe 2
TR4 Z EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. Z11 Washer, plain Silencer to tail pipe 2
TR4 Z EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. Z11 Washer, plain Silencer to tail pipe 2
TR4 N CHASSIS FRAME AND RADIATOR SKID SHIELD. N28 Washer, plain Rebound brackets to front spring abutment bracket 4
TR4 A ENGINE: CYLINDER BLOCK AND HEAD. A90 Washer, plain Rocker cover attachment 2
TR4 H ENGINE: 1-3/4" SU CARBURETTORS. H76 Washer, plain, between lever and split pin
Fitted up to Engine No. CT168DOE and from CT16901E up to CT only		 1
TR4 JA ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). J9 Washer, plain Dynamo to bracket rear as req'd.
TR4 JA ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). J9 Washer, plain Dynamo to bracket rear as req'd.
TR4 BB OVERDRIVE: OVERDRIVE UNIT DETAILS BB54 Washer, plain Attaching Solenoid bracket to front casing 2
TR4 BB OVERDRIVE: OVERDRIVE UNIT DETAILS BB54 Washer, plain Attaching Solenoid bracket to front casing 2
TR4 HS ENGINE: 1-3/4" STROMBERG CARBURETTORS. HS70 Washer, plain Lever to manifold
Fitted from Engine No. CT16801E up to CT16900E and from CT and future		 1
TR4 W CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS AND SUPPORT BRACKET. W10 Washer, plain Master cylinder fork ends to pedals 2
TR4 U HANDBRAKE: LEVER, CABLES AND COMPENSATOR. U47 Washer, plain, between cotter pin and fork-end 2
TR4 Y HYDRAULIC PIPES, PETROL PIPES, PETROL TANK AND SENDER UNIT. Y24 Washer, plain, under nut 1
TR4 AW BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. AW27 Washer, plain Support tubes to overiders 2
TR4 AW BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. AW66 Washer, plain Tie rods to overiders 2
TR4A A 83 m.m. and 86 m.m. ENGINE: BLOCK AND HEAD A82 Washer, plain Rocker cover attachment 2
TR4A M 83 m.m. and 86 m.m. ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). M9 Washer, plain Dynamo to bracket rear as req'd.
TR4A M 83 m.m. and 86 m.m. ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). M9 Washer, plain Dynamo to bracket rear as req'd.
TR4A K 83 m.m. and 86 m.m. ENGINE: 1-3/4" STROMBERG CARBURETTORS. K70 Washer, plain manifold
Fitted up to Engine No only		 1
TR4A KS 83 m.m. and 86 m.m. ENGINE: 1-3/4" SU CARBURETTORS. KS74 Washer, plain Securing bellcrank lever to support bracket
Fitted from Engine No and future		 1
TR4A L 83 m.m. and 86 m.m. ENGINE: AIR CLEANERS. L4 Washer, plain Air cleaner to carburettor
Normal Fitment		 4
TR4A L 83 m.m. and 86 m.m. ENGINE: AIR CLEANERS. L17 Washer, plain Air cleaner to carburettors
Special orders only		 4
TR4A BJ OVERDRIVE: OVERDRIVE UNIT DETAILS (Rigid axles only). BJ54 Washer, plain Attaching Solenoid bracket to front casing 2
TR4A BK OVERDRIVE: OVERDRIVE UNIT DETAILS (independent rear axles only). BK53 Washer, plain Attaching solenoid bracket to front casing 2
TR4A AG RADIATOR AND OVERFLOW BOTTLE. TOOLS AND SERVICE KITS (Not illustrated). AG12 Washer, plain Stay to front suspension box 4
TR4A AB CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS AND SUPPORT BRACKET. AB10 Washer, plain Master cylinder fork ends to pedals 2
TR4A AFS EXHAUST SYSTEM: SINGLE REAR TRANSVERSE SILENCER TYPE. AFS27 Washer Securing silencer to rear end of Intermediate pipe and mounting bracket
Fitted from Comm. No and future		 1
TR4A AQ BODY AND FITTINGS: BODY COMPLETE, BODY MOUNTINGS. AQ38 Washer, plain Body mounting spare wheel pan 1
TR4A AT BODY AND FITTINGS: GRILL, BONNET AND BONNET FASTENER DETAILS, MEDALLION. AT7 Washer, plain Bonnet hinge to closing panel 4
TR4A AT BODY AND FITTINGS: GRILL, BONNET AND BONNET FASTENER DETAILS, MEDALLION. AT9 Washer, plain Bonnet hinge to front stiffener assembly 8
TR4A AW BODY AND FITTINGS: METAL AND VENEERED FACIA PANELS, CUBBY BOX AND SWITCH PLINTH. AW68 Washer, plain Support bracket to fixing bracket 2
TR4A AW BODY AND FITTINGS: METAL AND VENEERED FACIA PANELS, CUBBY BOX AND SWITCH PLINTH. AW68 Washer, plain Support bracket to fixing bracket 2
TR4A BD BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. BD60 Washer, plain Tie rods to overiders 2
TR250 AE ELECTRICAL EQUIPMENT: Distributor and Ignition Coil AE31 Washer, plain - Ignition coil attachment 2
TR250 B ENGINE: Cylinder Head B51 Washer, plain - Rocker cover to cylinder head studs 3
TR250 V STEERING V22 Washer, plain - Securing joint to columns 2
TR250 V STEERING V61 Washer, plain - Rack and pinion body to frame 4
TR250 AQ BODY FITTINGS: Body Shell to Chassis Mountings AQ44 Washer, plain - Body mounting spare wheel pan 1
TR250 M ENGINE: Alternator Mounting M5 Washer, plain Alternator to mounting bracket 1
TR250 M ENGINE: Alternator Mounting M5 Washer, plain Alternator to mounting bracket 1
TR250 X ACCELERATION CONTROL X20 Washer, plain - Bell crank lever to support bracket 1
TR250 AT BODY AND FITTINGS: Radiator Grille and Bonnet Assemblies AT7 Washer, plain - Bonnet hinge to closing panel 4
TR250 AT BODY AND FITTINGS: Radiator Grille and Bonnet Assemblies AT10 Washer, plain - Bonnet hinge to front stiffener assembly 8
TR250 AW BODY AND FITTINGS: Facia Panel Assembly AW66 Washer, plain - Support bracket to fixing bracket 2
TR250 AW BODY AND FITTINGS: Facia Panel Assembly AW66 Washer, plain - Support bracket to fixing bracket 2
TR250 Y BRAKE CONTROLS: Clutch and Brake Pedal, and Master Cylinder Y14 Washer, plain - Master cylinder fork ends to pedals 2
TR250 N CLUTCH N41 Washer, plain - Slave cylinder push rod to clutch operating lever 1
TR250 N CLUTCH N41 Washer, plain - Slave cylinder push rod to clutch operating lever 1
TR250 W HANDBRAKE W27 Washer, plain - Fork end to wheel cylinder lever and cable 2
TR250 BC BODY AND FITTINGS: Bumpers BC60 Washer, plain - Tie rods to overriders 2
TR250 AC EXHAUST SYSTEM AC23 Washer - Flexible strip to bracket and chassis frame 1
TR5 AF ELECTRICAL EQUIPMENT: DISTRIBUTOR AND IGNITION COIL AF33 Washer, plain Ignition coil attachment 2
TR5 U STEERING: STEERING WHEEL, STEERING COLUMN, RACK AND PINION AND MOUNTINGS U22 Washer, plain Securing joint to columns 2
TR5 U STEERING: STEERING WHEEL, STEERING COLUMN, RACK AND PINION AND MOUNTINGS U61 Washer, plain Rack and pinion body to frame 4
TR5 AR BODY AND FITTINGS: COMPLTE BODY AND BODY MOUNTINGS AR44 Washer, plain Body mounting spare wheel pan 1
TR5 B ENGINE: CYLINDER HEAD B51 Washer, plain Rocker cover to cylinder head studs 3
TR5 K ENGINE: ALTERNATOR MOUNTING, SPARK PLUGS AND HT LEADS K5 Washer, plain Alternator to mounting bracket 1
TR5 K ENGINE: ALTERNATOR MOUNTING, SPARK PLUGS AND HT LEADS K5 Washer, plain Alternator to mounting bracket 1
TR5 AU BODY AND FITTINGS: GRILL, BONNET AND BONNET FASTENER AND RELEASE DETAILS, MEDALLION AU7 Washer, plain Bonnet hinge to closing panel 4
TR5 AU BODY AND FITTINGS: GRILL, BONNET AND BONNET FASTENER AND RELEASE DETAILS, MEDALLION AU10 Washer, plain Bonnet hinge to stiffener front assembly 8
TR5 X CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS, SUPPORT BRACKET AND SERVO UNIT X9A Washer, plain Pedal box to dash-R.H.S. only 2
TR5 X CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS, SUPPORT BRACKET AND SERVO UNIT X14 Washer, plain Master cylinder fork ends to pedals 2
TR5 AX BODY AND FITTINGS: METAL AND VENEERED FACIA PANELS, CUBBY BOX , SWITCH PLINTH AND H FRAME AX66 Washer, plain Support bracket to fixing bracket 2
TR5 AX BODY AND FITTINGS: METAL AND VENEERED FACIA PANELS, CUBBY BOX , SWITCH PLINTH AND H FRAME AX66 Washer, plain Support bracket to fixing bracket 2
TR5 L CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER L41 Washer, plain Slave cylinder push rod to clutch operating lever 1
TR5 L CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER L41 Washer, plain Slave cylinder push rod to clutch operating lever 1
TR5 V HANDBRAKE: LEVER AND CABLES V27 Washer, plain Fork end to wheel cylinder lever and cable 2
TR5 BJ OVERDRIVE: ASSEMBLY DETAILS BJ53 Washer, plain Attaching solenoid bracket to front casing 2
TR5 BD BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS BD60 Washer, plain Tie rods to overriders 2
TR5 AC EXHAUST SYSTEM AND MOUNTINGS AC26 Washer Strip to brackets and chassis 1
TR6CP AX ELECTRICAL EQUIPMENT: Distributor and Coil AX33 WASHER, plain - Ignition coil attachment 2
TR6CP P ENGINE (Petrol Injection Model): Cylinder Head and Rocker Assemblies P51 WASHER, plain -Rocker cover to cylinder head studs 3
TR6CP AH STEERING AH59 WASHER, plain - Rack and pinion body to frame 4
TR6CP BH BODY AND FITTINGS: Body Shell Complete and Mounting BH44 WASHER, plain - Body mounting spare wheel pan 1
TR6CP BP BODY AND FITTINGS: Dashboard, Scuttle & 'H' Frame BP66 WASHER, plain - Support bracket to fixing bracket 2
TR6CP BP BODY AND FITTINGS: Dashboard, Scuttle & 'H' Frame BP66 WASHER, plain - Support bracket to fixing bracket 2
TR6CP AL ACCELERATION CONTROL (PETROL INJECTION MODEL) AL56W WASHER, plain, fast idle cam to mounting bracket
Fitted from Engine No. CF1 HE		 1
TR6CP BQ BODY AND FITTINGS: Steering Outer Column BQ34D WASHER,plain-Securing upper clamp to lower
Fitted from Body No. 50,001 wherever lock type steering is fitted		 2
TR6CP BQ BODY AND FITTINGS: Steering Outer Column BQ34D WASHER,plain-Securing upper clamp to lower
Fitted from Body No. 50,001 wherever lock type steering is fitted		 2
TR6CP BQ BODY AND FITTINGS: Steering Outer Column BQ34D WASHER,plain-Securing upper clamp to lower
Fitted from Body No. 50,001 wherever lock type steering is fitted		 2
TR6CP BL BODY AND FITTINGS: Radiator Grill and Bonnet Assembly BL7 WASHER, plain - Bonnet hinge to bonnet 8
TR6CP BS BODY AND FITTINGS: Boot Assembly and Rear Decals BS4 WASHER, plain - Hinges to trunk lid 6
TR6CP CB OVERDRIVE: 'A' Type: Unit Assembly CB53 WASHER, plain — Attaching solenoid bracket to front casing 2
TR6CP AM CLUTCH, BRAKE PEDALS & MASTER CYLINDER AM9B WASHER, plain - Pedal box to dash - R.H.S. only 2
TR6CP AM CLUTCH, BRAKE PEDALS & MASTER CYLINDER AM14 WASHER, plain - Master cylinder fork ends to pedals 2
TR6CP Y CLUTCH: Clutch Assembly and Operation Y41 WASHER, plain - Slave cylinder push rod to clutch operating lever 1
TR6CP Y CLUTCH: Clutch Assembly and Operation Y41 WASHER, plain - Slave cylinder push rod to clutch operating lever 1
TR6CP BV BODY AND FITTINGS: Bumpers BV6 WASHER, plain - Front bumper side fixing
Fitted up to Comm. No. CF1		 2
TR6CP BV BODY AND FITTINGS: Bumpers BV39 WASHER, plain — Securing bumper to side bracket
Fitted up to Comm. No. CP26933 and CC31778		 2
TR6CP AJ HANDBRAKE AJ27 WASHER, plain - Fork end to wheel cylinder lever and cable 2
TR6CP AU EXHAUST SYSTEM (PETROL INJECTION MODEL) AU26 WASHER - Strip to brackets and chassis 1
TR6CC AX ELECTRICAL EQUIPMENT: Distributor and Coil AX33 WASHER, plain - Ignition coil attachment 2
TR6CC B ENGINE (Carburettor Model): Cylinder and Rocker Assemblies B51 WASHER, plain -Rocker cover to cylinder head studs 3
TR6CC AH STEERING AH59 WASHER, plain - Rack and pinion body to frame 4
TR6CC BH BODY AND FITTINGS: Body Shell Complete and Mounting BH44 WASHER, plain - Body mounting spare wheel pan 1
TR6CC BP BODY AND FITTINGS: Dashboard, Scuttle & 'H' Frame BP66 WASHER, plain - Support bracket to fixing bracket 2
TR6CC BP BODY AND FITTINGS: Dashboard, Scuttle & 'H' Frame BP66 WASHER, plain - Support bracket to fixing bracket 2
TR6CC BQ BODY AND FITTINGS: Steering Outer Column BQ34D WASHER,plain-Securing upper clamp to lower
Fitted from Body No. 50,001 wherever lock type steering is fitted		 2
TR6CC BQ BODY AND FITTINGS: Steering Outer Column BQ34D WASHER,plain-Securing upper clamp to lower
Fitted from Body No. 50,001 wherever lock type steering is fitted		 2
TR6CC BQ BODY AND FITTINGS: Steering Outer Column BQ34D WASHER,plain-Securing upper clamp to lower
Fitted from Body No. 50,001 wherever lock type steering is fitted		 2
TR6CC BL BODY AND FITTINGS: Radiator Grill and Bonnet Assembly BL7 WASHER, plain - Bonnet hinge to bonnet 8
TR6CC BS BODY AND FITTINGS: Boot Assembly and Rear Decals BS4 WASHER, plain - Hinges to trunk lid 6
TR6CC CB OVERDRIVE: 'A' Type: Unit Assembly CB53 WASHER, plain — Attaching solenoid bracket to front casing 2
TR6CC AK ACCELERATION CONTROL (CARBURETTOR MODEL) AK20 WASHER, plain - Bell crank lever to support bracket 1
TR6CC AR PETROL SYSTEM (CARBURETTOR MODEL) AR10AQ WASHER, plain - Securing bracket assembly canister mounting
Fitted from Body No. CC62448 up to ............		 1
TR6CC AR PETROL SYSTEM (CARBURETTOR MODEL) AR10AQ WASHER, plain - Securing bracket assembly canister mounting
Fitted from Body No. CC62448 up to ............		 1
TR6CC AR PETROL SYSTEM (CARBURETTOR MODEL) AR11BH WASHER, plain - Securing bracket assembly canister mounting 1
TR6CC AR PETROL SYSTEM (CARBURETTOR MODEL) AR11BH WASHER, plain - Securing bracket assembly canister mounting 1
TR6CC AM CLUTCH, BRAKE PEDALS & MASTER CYLINDER AM9B WASHER, plain - Pedal box to dash - R.H.S. only 2
TR6CC AM CLUTCH, BRAKE PEDALS & MASTER CYLINDER AM14 WASHER, plain - Master cylinder fork ends to pedals 2
TR6CC Y CLUTCH: Clutch Assembly and Operation Y41 WASHER, plain - Slave cylinder push rod to clutch operating lever 1
TR6CC Y CLUTCH: Clutch Assembly and Operation Y41 WASHER, plain - Slave cylinder push rod to clutch operating lever 1
TR6CC BV BODY AND FITTINGS: Bumpers BV6 WASHER, plain - Front bumper side fixing
Fitted up to Comm. No. CF1		 2
TR6CC BV BODY AND FITTINGS: Bumpers BV39 WASHER, plain — Securing bumper to side bracket
Fitted up to Comm. No. CP26933 and CC31778		 2
TR6CC AJ HANDBRAKE AJ27 WASHER, plain - Fork end to wheel cylinder lever and cable 2
TR6CC AT EXHAUST SYSTEM (CARBURETTOR MODEL) AT23 WASHER - Flexible strip to bracket and chassis frame
ALL MARKETS up to Comm. No. CC67893		 1
TR6CF 20-32 ENGINE (CARB MODELS) 20-32 WASHER PLAIN 5/16 X 5/8 X .075 3
TR6CF 20-32 ENGINE (CARB MODELS) 20-32 WASHER PLAIN 5/16 X 5/8 X .075 3

To view the Triumph Catalogue Plates, please pick a car type