Choose Car Type


then
Search for parts
or
Browse
for parts

Suspension and steering

STEERING RACK CONVERSION TR2-3B

Revington TR has developed an ingenious steering rack conversion. This kit, developed in conjunction with our famous suspension kits, provides very light steering and removes inherent bump steer.

Also due to a change in the steering arms, supplied with the kit on exchange, the new system provides toe-out on turns rather than toe in which the original system exhibits. This ensures the car 'turns in' to corners rather than ploughing straight on. A deposit is charged pending the return of your steering arms, the cost of which will be advised at the time of purchase should you not be able to send us your steering arms before purchase.

Important:
The position of the steering rack, up or down effects bump steer, our steering rack is positioned so that bump steer is eliminated on a perfect chassis. With the rack so positioned, the nose protruding from the front of the engine must be removed, as the rack will need to occupy this space. An electric fan kit must therefore be used along with a bolt and washer set to bolt the pulley to the crank, order:
RTR1483-A Fan Kit
RTR1027K Washer/Bolt Set
TR2-3 owners with non-split columns can use the above kit, but will need an upper column from a TR3A split column type. If you do not have one, we can provide an inner and outer set. Order RTR3315K Upper column set. This set is for rack use only as it does not have a hole up the middle to accommodate the original stator tube. In addition it is necessary to utilize some of the TR3A column support parts, bolted to the bulkhead. To make life easier, we offer these as a kit as follows:

RTR3406LK Support kit LHD.
RTR3406RK Support kit RHD.

There are electrical issues to consider too as the original turn signal and horn arrangement cannot be retained. See The Electrical section for suggestions on alternatives.
10 results found.
< Back
  Part No. Description and Comments Price Add to Cart
RTR3202LK

CLICK FOR
MORE INFO

RTR Upgrade

STEERING RACK CONVERSION TR2-3B LHD

Revington TR information: This ingenious steering rack conversion developed by Revington TR fits Left Hand Drive TR's 2, 3, 3A, 3B and Italia, giving lighter steering, added safety and improved steering geometry. It incorporates a rack giving 2.9 turns... READ MORE

£1189.45

Ex VAT @ 20%
£991.21



Available to order
RTR3202L-1K

CLICK FOR
MORE INFO

RTR Upgrade

STEERING RACK CONVERSION TR2-3B LHD

Revington TR information: This ingenious steering rack conversion developed by Revington TR fits Left Hand Drive TR's 2, 3, 3A, 3B and Italia, giving lighter steering, added safety and improved steering geometry. It incorporates a quick rack giving 2.15... READ MORE

 
No longer available 
RTR3202RK

CLICK FOR
MORE INFO

RTR Upgrade

STEERING RACK CONVERSION TR2-3B RHD

Revington TR information: This ingenious steering rack conversion developed by Revington TR fits Right Hand Drive TR's 2, 3, 3A, 3B and Italia, giving lighter steering, added safety and improved steering geometry. It incorporates a rack giving 2.9 turns... READ MORE

£1189.45

Ex VAT @ 20%
£991.21



RTR3202R-1K

CLICK FOR
MORE INFO

RTR Upgrade

STEERING RACK CONV QUICK TR2-3B RHD

Revington TR information: This ingenious steering rack conversion developed by Revington TR fits Right Hand Drive TR's 2, 3, 3A, 3B and Italia, giving lighter steering, added safety and improved steering geometry. It incorporates a quick rack giving 2.15... READ MORE

 
No longer available 
121154X

CLICK FOR
MORE INFO

COLUMN UPPER ASSEMBLY TR3A HOLLOW INNER TUBE

Revington TR information: Upper column kit consisting of a hollow inner shaft 205221 and an outer column with plastic bushes fitted top and bottom. Sometime between TS26000 and TS34000 the steering column was changed to a split type with a... READ MORE

£310.50

Ex VAT @ 20%
£258.75



Available to order
RTR3315K

CLICK FOR
MORE INFO

RTR Upgrade

COLUMN UPPER SET TR3A NOT HOLLOW

Revington TR information: Upper column set. This set is for use with steering rack conversions only (typically RTR3202LK and RTR3202RK) as it does not have a hole up the middle to accommodate the original stator tube. This part is... READ MORE

£317.04

Ex VAT @ 20%
£264.20



Available to order
RTR3406LK

CLICK FOR
MORE INFO

RTR Upgrade

STEERING SUPPORT KIT LHD

Revington TR information: Support kit LHD This bracket kit provides all the parts necessary to support a TR3A upper column of the split type, where it is bolted to the bulkhead. This kit is supplied to make life easier... READ MORE

£116.68

Ex VAT @ 20%
£97.23



Available to order
RTR3406RK

CLICK FOR
MORE INFO

RTR Upgrade

STEERING SUPPORT KIT RHD

Revington TR information: Support kit RHD This bracket kit provides all the parts necessary to support a TR3A upper column of the split type, where it is bolted to the bulkhead. This kit is supplied to make life easier... READ MORE

£114.30

Ex VAT @ 20%
£95.25



RTR1483-A

CLICK FOR
MORE INFO

RTR Upgrade

REVOTEC DELUX ELECTRIC FAN KIT 12" TR2-4

Revington TR information: This kit includes a 280mm (11") suction fan in a 12" casing, crank bolt set (RTR1027K) mounting brackets and a precise adjustable temperature controller. This kit offers optimum cooling performance to ensure your engine runs... READ MORE

£357.82

Ex VAT @ 20%
£298.18



Available to order
RTR1027K

CLICK FOR
MORE INFO

RTR Upgrade

WASHER SET CRANK TR2-4A

Revington TR information: TR2-4A Crank washer and short bolt set for use when the engine fan hub extension is removed. This kit secures the fan pulley and inner hub (which the front oil seal bears on) to the crankshaft.... READ MORE

£23.33

Ex VAT @ 20%
£19.44



10 results found.

To view the Triumph Catalogue Plates, please pick a car type