Home » Engine, Transmission, wheels/Tyres and Heating/Cooling » ENGINES and COMPONENTS » CRANKSHAFTS AND CONNECTING RODS

Engine, Transmission, wheels/Tyres and Heating/Cooling

CRANKSHAFTS AND CONNECTING RODS

5 results found.

	Part No.	Description and Comments	Price	Add to Cart
	RTR1216 CLICK FOR MORE INFO	CON ROD BEAM TYPE TR4 STD Revington TR information: TR2-4A Corrillo beam connecting rod standard length 6.25", will fit steel cranks and standard cranks.	£694.96 Ex VAT @ 20% £579.13	Available to order
	RTR1216L CLICK FOR MORE INFO	CON ROD TR4 1/2" LONGER Revington TR information: TR2-4A Corrillo beam connecting rods with 171.45mm (6.75") Centres - 12.7mm(1/2") longer than standard; will fit steel cranks and standard cranks. Use with RTR1221S or RTR1221SX pistons.	£661.38 Ex VAT @ 20% £551.15	Available to order
	RTR1215 CLICK FOR MORE INFO	CRANK STEEL 12 BOLT Revington TR information: TR2-4A Steel three bearing Crankshaft with plain rear end, to enable easy fitment of Gaco type oil seal. The flywheel is attached with 12 Cap Head bolts RTR1215B. The Crankshaft is fully cross-drilled such that the... READ MORE	£5396.46 Ex VAT @ 20% £4497.05	Available to order
	RTR1214 CLICK FOR MORE INFO	CRANK STEEL TR4 STD FLYWHEEL TYPE Revington TR information: TR2-4A steel crank shaft, produced from 722M24 (EN40B) steel, heat treated. This type of steel crankshaft accepts flywheels which use the standard 4 bolt and dowel fixings. The crankshafts are made to special order, have a... READ MORE	£5423.95 Ex VAT @ 20% £4519.96	Available to order
	RTR1469 CLICK FOR MORE INFO	STEEL CRANK TR4 DUMMY 5 BRG Revington TR information: TR2-4A Steel Crankshaft. Dummy 5 bearing design. This is the ultimate steel crankshaft with 2 extra dummy main bearings. This design has reduced inertia resulting in a freer revving engine as the webs to are concentrated... READ MORE	£5555.02 Ex VAT @ 20% £4629.18	Available to order

5 results found.

17 plates in total

ENGINE: CYLINDER BLOCK AND HEAD

PLATE A - ENGINE: CYLINDER BLOCK AND HEAD

ENGINE: CRANK, PISTONS, CONNECTING RODS AND FLYWHEEL.

PLATE B - ENGINE: CRANK, PISTONS, CONNECTING RODS AND FLYWHEEL.

ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS.

PLATE D - ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS.

ENGINE: OIL FILTER ASSEMBLY.

PLATE F - ENGINE: OIL FILTER ASSEMBLY.

ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated).

PLATE C - ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated).

ENGINE: WATER THERMOSTAT, WATER HOSES AND IGNITION (Not illustrated).

PLATE H - ENGINE: WATER THERMOSTAT, WATER HOSES AND IGNITION (Not illustrated).

ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated).

PLATE JA - ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated).

CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER.

PLATE J - CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER.

GEARBOX: CASING, TOP COVER AND MOUNTING.

PLATE K - GEARBOX: CASING, TOP COVER AND MOUNTING.

GEARBOX: MAINSHAFT, CONSTANT PINION SHAFT, COUNTERSHAFT AND REVERSE GEAR.

PLATE L - GEARBOX: MAINSHAFT, CONSTANT PINION SHAFT, COUNTERSHAFT AND REVERSE GEAR.

HIGH SPEED EQUIPMENT: GEARBOX AND OVERDRIVE, COMPETITION PARTS AND TONNEAU COVER Uprated Springs, Dampers and Brakes

PLATE AT - HIGH SPEED EQUIPMENT: GEARBOX AND OVERDRIVE, COMPETITION PARTS AND TONNEAU COVER Uprated Springs, Dampers and Brakes

OVERDRIVE UNIT DETAILS.

PLATE AW - OVERDRIVE UNIT DETAILS.

REAR AXLE: EARLY 'LOCKHEED' TYPE 4 BOLT MOUNTING.

PLATE P - REAR AXLE: EARLY 'LOCKHEED' TYPE 4 BOLT MOUNTING.

REAR AXLE: LATE 'GIRLING TYPE' 6 BOLT MOUNTING.

PLATE PS - REAR AXLE: LATE 'GIRLING TYPE' 6 BOLT MOUNTING.

REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS.

PLATE Q - REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS.

EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS.

PLATE X - EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS.

ACCESSORIES: HEATER KIT.

PLATE AU - ACCESSORIES: HEATER KIT.