Suspension and steering
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
TRIUMPH PLATES - Browse Original Triumph Catalogue Plates
STEERING RACK CONVERSION TR2-3B
Revington TR has developed an ingenious steering rack conversion. This kit, developed in conjunction with our famous suspension kits, provides very light steering and removes inherent bump steer.Also due to a change in the steering arms, supplied with the kit on exchange, the new system provides toe-out on turns rather than toe in which the original system exhibits. This ensures the car 'turns in' to corners rather than ploughing straight on. A deposit is charged pending the return of your steering arms, the cost of which will be advised at the time of purchase should you not be able to send us your steering arms before purchase.
Important: The position of the steering rack, up or down effects bump steer, our steering rack is positioned so that bump steer is eliminated on a perfect chassis. With the rack so positioned, the nose protruding from the front of the engine must be removed, as the rack will need to occupy this space. An electric fan kit must therefore be used along with a bolt and washer set to bolt the pulley to the crank, order:
| RTR1483-A | Fan Kit |
| RTR1027K | Washer/Bolt Set |
RTR3406LK Support kit LHD.
RTR3406RK Support kit RHD.
There are electrical issues to consider too as the original turn signal and horn arrangement cannot be retained. See The Electrical section for suggestions on alternatives.
| Part No. | Description and Comments | Price | Add to Cart | |
|---|---|---|---|---|
 |
RTR3202LK
|
STEERING RACK CONVERSION TR2-3B LHDRevington TR information: This ingenious steering rack conversion developed by Revington TR fits Left Hand Drive TR's 2, 3, 3A, 3B and Italia, giving lighter steering, added safety and improved steering geometry. It incorporates a rack giving 2.9 turns... READ MORE |
£1189.45 Ex VAT @ 20% |
|
 |
RTR3202L-1K
|
STEERING RACK CONVERSION TR2-3B LHDRevington TR information: This ingenious steering rack conversion developed by Revington TR fits Left Hand Drive TR's 2, 3, 3A, 3B and Italia, giving lighter steering, added safety and improved steering geometry. It incorporates a quick rack giving 2.15... READ MORE |
||
 |
RTR3202RK
|
STEERING RACK CONVERSION TR2-3B RHDRevington TR information: This ingenious steering rack conversion developed by Revington TR fits Right Hand Drive TR's 2, 3, 3A, 3B and Italia, giving lighter steering, added safety and improved steering geometry. It incorporates a rack giving 2.9 turns... READ MORE |
£1189.45 Ex VAT @ 20% |
|
 |
RTR3202R-1K
|
STEERING RACK CONV QUICK TR2-3B RHDRevington TR information: This ingenious steering rack conversion developed by Revington TR fits Right Hand Drive TR's 2, 3, 3A, 3B and Italia, giving lighter steering, added safety and improved steering geometry. It incorporates a quick rack giving 2.15... READ MORE |
||
 |
121154X |
COLUMN UPPER ASSEMBLY TR3A HOLLOW INNER TUBERevington TR information: Upper column kit consisting of a hollow inner shaft 205221 and an outer column with plastic bushes fitted top and bottom. Sometime between TS26000 and TS34000 the steering column was changed to a split type with a... READ MORE |
£310.50 Ex VAT @ 20% |
|
 |
RTR3315K
|
COLUMN UPPER SET TR3A NOT HOLLOWRevington TR information: Upper column set. This set is for use with steering rack conversions only (typically RTR3202LK and RTR3202RK) as it does not have a hole up the middle to accommodate the original stator tube. This part is... READ MORE |
£317.04 Ex VAT @ 20% |
|
 |
RTR3406LK
|
STEERING SUPPORT KIT LHDRevington TR information: Support kit LHD This bracket kit provides all the parts necessary to support a TR3A upper column of the split type, where it is bolted to the bulkhead. This kit is supplied to make life easier... READ MORE |
£116.68 Ex VAT @ 20% |
|
 |
RTR3406RK
|
STEERING SUPPORT KIT RHDRevington TR information: Support kit RHD This bracket kit provides all the parts necessary to support a TR3A upper column of the split type, where it is bolted to the bulkhead. This kit is supplied to make life easier... READ MORE |
£114.30 Ex VAT @ 20% |
|
 |
RTR1483-A
|
REVOTEC DELUX ELECTRIC FAN KIT 12" TR2-4Revington TR information: This kit includes a 280mm (11") suction fan in a 12" casing, crank bolt set (RTR1027K) mounting brackets and a precise adjustable temperature controller. This kit offers optimum cooling performance to ensure your engine runs... READ MORE |
£357.82 Ex VAT @ 20% |
|
 |
RTR1027K
|
WASHER SET CRANK TR2-4ARevington TR information: TR2-4A Crank washer and short bolt set for use when the engine fan hub extension is removed. This kit secures the fan pulley and inner hub (which the front oil seal bears on) to the crankshaft.... READ MORE |
£23.33 Ex VAT @ 20% |
