Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR250 Plate A - ENGINE: External
<< Return to Triumph Catalogue Plate ListAlso in this listing
Complete Engine and External AssemblyPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
A1AA | 516794 |
ENGINE UNIT 8.6-1 Ratio (Carburettor Model only) |
1 | |||
A1BB | 516794/R |
ENGINE UNIT 8.6-1 Ratio (Carburettor Model only) RECONDITIONED UNIT |
1 | |||
Note:-The above units are less water pump, distributor, dynamo, petrol pump, oil filter, thermostat, inlet and exhaust manifolds, carburettors and sparking plugs. |
||||||
A1CC | 517276 |
DECARBONISING GASKET SETRevington TR information: Head gasket set for flat top TR250 and 6 Engine Block (no recess) up to engine number CC75000. Also known as a Decarbonising Set The following head gasket and gasket set range fitted to TR250,... READ MORE |
1 |
£64.02 Ex VAT @ 20% |
||
A1DD | 517275 |
ENGINE GASKET SETThis item has been superceded by AJM214 - see below |
1 | |||
AJM214 |
GASKET SET BOTTOM END TR5-6. |
1 |
£36.02 Ex VAT @ 20% |
|||
A1 | 516800 |
CYLINDER BLOCK |
1 | |||
Cap, bearing - Front and intermediateTriumph Catalogue Remarks: Not serviced |
||||||
Cap, bearing - RearTriumph Catalogue Remarks: Not serviced |
||||||
A2 | HB1024 |
Bolt - Caps to blockThis item has been superceded by BH607241 - see below |
8 | |||
BH607241 |
BOLT 7/16 UNF X 3 INCH |
8 |
£1.38 Ex VAT @ 20% |
|||
A3 | WL0210 |
Washer, lock - Caps to blockThis item has been superceded by WS107121203 - see below |
8 | |||
WS107121203 |
WASHER SPRING 7/16" RECT SECTION |
8 |
£0.42 Ex VAT @ 20% |
|||
A4 | PS1103 |
Plug, core, oil gallery, front |
1 |
£4.03 Ex VAT @ 20% |
||
AS | 148353 |
Plug, core, rear of camshaft |
1 |
£1.60 Ex VAT @ 20% |
||
A6 | 144688 |
Plug, core, front face, R.H. side of block |
5 |
£2.20 Ex VAT @ 20% |
||
A7 | 144686 |
Plug, core, rear face, L.H. side of block |
3 |
£3.71 Ex VAT @ 20% |
||
A8 | 144687 |
Plug, core, front face of blockRevington TR information: This item has a secondhand part available - see below |
1 |
£3.67 Ex VAT @ 20% |
||
144687SH |
CORE PLUG TR5-6 CUP TYPE 1" SH |
1 |
£1.08 Ex VAT @ 20% |
|||
A9 | 118632 |
Plug, dry seal, oil gallery, rearThis item has been superceded by 301815P - see below |
I | |||
301815P |
PLUG CRANK SHAFT TR3-4A & 5-6Revington TR information: TR3-4A Plug shaft in crank. 1/2" long with a hex key slot. |
I |
£2.58 Ex VAT @ 20% |
|||
A10 | PU1404 |
Plug, oil galleryThis item has been superceded by 056765 - see below |
1 | |||
056765 |
PLUG BLANKNG OIL GALLERY TR2-6Revington TR information: TR2-4A oil gallery end plugs, part number 056765, are screwed into the block and must be removed and replaced during an engine rebuild to ensure the oil gallery can be cleaned properly. Price per plug not... READ MORE |
1 |
£8.04 Ex VAT @ 20% |
|||
A11 | 118686 |
Plug, oil gallery |
5 |
£4.31 Ex VAT @ 20% |
||
A11A | 116511 |
Plug, oil gallery |
1 |
£6.49 Ex VAT @ 20% |
||
A12 | 143943 |
Adaptor, oil pressure gauge pipe |
1 |
£17.64 Ex VAT @ 20% |
||
A13 | 137978 |
Bush, oil pump drive shaftRevington TR information: This oil pump drive bush is fitted into the block of early TR5 models and all TR250. Late TR5's and all TR6 use bush part number 149776 which fits into a larger bore in the engine... READ MORE |
1 | |||
A14 | DP0514 |
Dowel, timing cover attachmentThis item has been superceded by DP514 - see below |
2 | |||
DP514 |
DOWEL 5/16 DIA X 7/8" LONG |
2 |
£1.78 Ex VAT @ 20% |
|||
A15 | DP0612 |
Dowel, engine plate to gearboxThis item has been superceded by DP619 - see below |
2 | |||
DP619 |
DOWEL 3/8" DIA x 1.5" LONG Cut to fitRevington TR information: This dowel is used on 6 cylinder engines to locate crankshaft to flywheel. To determine length required, measure into the crankshaft and into the flywheel and add these together then subtract 1mm for clearance. |
2 |
£3.00 Ex VAT @ 20% |
|||
A16 | 146200 |
Stud, cylinder head attachmentThis item has been superceded by 156274 - see below |
14 | |||
156274 |
CYL HEAD STUDRevington TR information: Originally USA market only, now this part number is used for all TR5/6 head studs. There were three numbers originally, the difference between each part being the overall length which would have been governed by the... READ MORE |
14 |
£12.71 Ex VAT @ 20% |
|||
A17 | 139836 |
Stud, gearbox and rear engine plate attachmentThis item has been superceded by ST605141 - see below |
3 | |||
ST605141 |
STUD 5/16 X 1-3/4" UNF+ UNF |
3 |
£3.46 Ex VAT @ 20% |
|||
A18 | 100433 |
Stud, timing cover and engine plate attachmentThis item has been superceded by ST605092 - see below |
2 | |||
ST605092 |
STUD 5/16 X 1.156" UNF+ UNF |
2 |
£2.66 Ex VAT @ 20% |
|||
A19 | 101962 |
Stud, distributor pedestal attachmentThis item has been superceded by ST605101 - see below |
2 | |||
ST605101 |
STUD 5/16 X 1-1/4" UNF+ UNF |
2 |
£3.04 Ex VAT @ 20% |
|||
A20 | 100433 |
Stud, petrol pump attachmentThis item has been superceded by ST605092 - see below |
2 | |||
ST605092 |
STUD 5/16 X 1.156" UNF+ UNF |
2 |
£2.66 Ex VAT @ 20% |
|||
A21 | 104863 |
Block, sealing, frontThis item has been superceded by 151134 - see below |
I | |||
151134 |
SEALER BLOCK TR5-6Revington TR information: Sealing block to front engine plate TR250, 5 and 6. Also suitable for 6 cylinder saloon cars. This part is manufactured from aluminium and is prone to having the attachment screws pull the thread out of... READ MORE |
I |
£53.98 Ex VAT @ 20% |
|||
A22 | 036234 |
Piece, filling - Sealing block to cylinder block |
2 |
£2.57 Ex VAT @ 20% |
||
A23 | 100501 |
Screw - Sealing block to cylinder blockThis item has been superceded by SW605081 - see below |
2 | |||
SW605081 |
SCREW(WAS 100501) |
2 |
£1.96 Ex VAT @ 20% |
|||
A24 | 061478 |
Tap, water drainRevington TR information: Brass Drain tap with a parallel 1/2"UNF thread, used in the engine block of TR2-5 to drain the coolant. This tap can be used on later TR's instead of the standard blanking plug, or indeed in... READ MORE |
1 |
£24.19 Ex VAT @ 20% |
||
061478SH |
Second Hand ENGINE BLOCK DRAIN TAPRevington TR information: Second Hand Brass Drain tap with a parallel 1/2"UNF thread, used in the engine block of TR2-5 to drain the coolant. This tap can be used on later TR's instead of the standard blanking plug, or... READ MORE |
1 |
£11.64 Ex VAT @ 20% |
|||
A25 | WFO511 |
Washer, fibre, water drain tapThis item has been superceded by WF10812062 - see below |
A/R | |||
WF10812062 |
WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK |
A/R |
£0.70 Ex VAT @ 20% |
|||
A26 | WF0525 |
Washer, fibre, water drain tapThis item has been superceded by WF10812062 - see below |
A/R | |||
WF10812062 |
WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK |
A/R |
£0.70 Ex VAT @ 20% |
|||
A27 | 145021 |
CYLINDER LINERThis item has been superceded by 158942 - see below |
6 | |||
158942 |
CYLINDER LINER |
6 |
£32.44 Ex VAT @ 20% |
|||
A28 | 212622 |
REAR OIL SEAL HOUSINGRevington TR information: Not available new use 212622SH |
1 | |||
212622SH |
Second Hand REAR C/SHAFT SEAL CARRIER |
1 |
£38.27 Ex VAT @ 20% |
|||
A29 | 143456 |
Seal, oil, crankshaft |
1 |
£6.25 Ex VAT @ 20% |
||
A30 | 105321 |
Washer, joint - Housing to cylinder block |
1 |
£0.98 Ex VAT @ 20% |
||
A31 | HB0809 |
Bolt - Housing to cylinder blockThis item has been superceded by SH605091 - see below |
7 | |||
SH605091 |
SCREW 5/16 UNF X 1-1/8 INCH |
7 |
£1.22 Ex VAT @ 20% |
|||
A32 | WL0208 |
Washer, lock - Housing to cylinder blockThis item has been superceded by WS105090853 - see below |
7 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
7 |
£0.25 Ex VAT @ 20% |
|||
OIL PRESSURE ADJUSTMENT DETAILSTriumph Catalogue Remarks: comprising parts A33-A36 |
||||||
A33 | 132107 |
Piston, relief valveRevington TR information: Piston. Oil pressure relive valve, TR250, 5, 6 and Triumph 2000 and 2.5PI etc. Original triumph parts were hardened to 40 Rockwell / 65 Vickers. There are many of these parts on the market that are... READ MORE |
1 |
£11.94 Ex VAT @ 20% |
||
A34 | 131535 |
Spring, relief valve pistonRevington TR information: This item has a secondhand part available - see below |
1 |
£7.92 Ex VAT @ 20% |
||
131535SH |
Second Hand PRES. REL. SPRING OIL TR5-6 |
1 |
£3.79 Ex VAT @ 20% |
|||
A35 | 107246 |
Plug, relief valveRevington TR information: Consider second hand part 107246SH. |
1 |
£21.97 Ex VAT @ 20% |
||
107246SH |
OIL PRV HOUSING Second Hand |
1 |
£16.85 Ex VAT @ 20% |
|||
A36 | 501258 |
Washer, relief valve plugThis item has been superceded by 6K433 - see below |
1 | |||
6K433 |
WASHER CRUSH COPPER 5/8"Revington TR information: This part is a 5/8" washer. Some on the market under this number are 3/4". |
1 |
£3.11 Ex VAT @ 20% |
|||
A36A | 149634 |
OIL PUMP ASSEMBLYThis item has been superceded by 217488 - see below |
1 | |||
217488 |
OIL PUMP TR6/TR.2000Revington TR information: Consider original second hand part number 217488SH. . |
1 | ||||
A37 | 127732 |
Body assembly, oil pumpThis item has been superceded by 217488 - see below |
1 | |||
217488 |
OIL PUMP TR6/TR.2000Revington TR information: Consider original second hand part number 217488SH. . |
1 | ||||
A37A | 104963 |
Plug, core, oil pump bodyRevington TR information: No longer available |
1 | |||
A38 | 508975 |
Rotor and spindle, assemblyThis item has been superceded by 217488 - see below |
1 | |||
217488 |
OIL PUMP TR6/TR.2000Revington TR information: Consider original second hand part number 217488SH. . |
1 | ||||
A38A | 149621 |
Filter, oil pump |
1 |
£21.26 Ex VAT @ 20% |
||
A39 | 214842 |
Cover, oil pump body |
1 | |||
A40 | HB0724 |
Bolt - Oil pump to cylinder blockThis item has been superceded by BH604241 - see below |
3 | |||
BH604241 |
BOLT 1/4 UNF X 3 INCH |
3 |
£1.55 Ex VAT @ 20% |
|||
A41 | WL0207 |
Washer, lock - Oil pump to cylinder blockThis item has been superceded by WS104070643 - see below |
3 | |||
WS104070643 |
WASHER SPRING 1/4" RECT SECTION |
3 |
£0.20 Ex VAT @ 20% |
|||
A42 | 307836 |
OIL SUMP ASSEMBLYThis item has been superceded by 307834 - see below |
1 | |||
307834 |
ENGINE SUMP TR5-6Revington TR information: Engine Sump TR250, 5, 6. No longer avaialble. Use second hand part 307834SH or aluminium part 307834ALI Two types of oil sump were fitted to TR250, 5 and 6. Part number 307834 and 307836 the difference... READ MORE |
1 | ||||
A43 | 114794 |
Plug, oil drainThis item has been superceded by 114774 - see below |
1 | |||
114774 |
PLUG DRAIN ENG/AXLE Square drive TR2-6Revington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
|||
A44 | 211125 |
Gasket, between sump and blockThis item has been superceded by AJM515 - see below |
1 | |||
AJM515 |
GASKET SUMP TR 5, 250 & 6Revington TR information: Full bottom set is AJM214. |
1 |
£7.45 Ex VAT @ 20% |
|||
A45 | HU0805 |
Screw, set - Oil pump to cylinder blockThis item has been superceded by SH605051 - see below |
23 | |||
SH605051 |
SCREW 5/16 UNF X 5/8 INCH |
23 |
£1.39 Ex VAT @ 20% |
|||
A46 | WL0208 |
Washer, lock - Oil pump to cylinder blockThis item has been superceded by WS105090853 - see below |
23 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
23 |
£0.25 Ex VAT @ 20% |
|||
A47 | 147712 |
DIPSTICK ASSEMBLYRevington TR information: not available new use Second Hand part 147712SH |
1 | |||
147712SH |
Second Hand DIPSTICK TR6 |
1 |
£44.71 Ex VAT @ 20% |
|||
A48 | 032307 |
Washer, felt, on dipstick |
1 |
£1.82 Ex VAT @ 20% |
||
A49 | 127652 |
Tube, dipstickRevington TR information: Call for price and availability |
1 | |||
A50 | 213777 |
FRONT ENGINE PLATEThis item has been superceded by 215349 - see below |
1 | |||
215349 |
PLATE ENGINE FRONT 6CYL.Revington TR information: not available new. Use Aluminium part 215349A or second hand please enquire |
1 | ||||
A51 | 213658 |
Washer, joint, front engine plateThis item has been superceded by 215350 - see below |
1 | |||
215350 |
GASKET F/ENG PLATE TR5-6 |
1 |
£2.05 Ex VAT @ 20% |
|||
A52 | HU0806 |
Screw, set - Front engine plate to cylinder blockThis item has been superceded by SH605061 - see below |
3 | |||
SH605061 |
SCREW 5/16 UNF X 3/4 INCH |
3 |
£0.54 Ex VAT @ 20% |
|||
A53 | WL0208 |
Washer, lock - Front engine plate to cylinder blockThis item has been superceded by WS105090853 - see below |
3 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
3 |
£0.25 Ex VAT @ 20% |
|||
A54 | HU0807 |
Screw, set - Front engine plate and camshaft locating plate to cylinder blockThis item has been superceded by SH605071 - see below |
2 | |||
SH605071 |
SCREW 5/16 UNF X 7/8 INCH |
2 |
£0.61 Ex VAT @ 20% |
|||
A55 | WL0208 |
Washer, lock - F ront engine plate and camshaft locating plate to cylinder blockThis item has been superceded by WS105090853 - see below |
2 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
|||
A56 | HU0807 |
Screw, set - Timing cover and front engine plate to cylinder blockThis item has been superceded by SH605071 - see below |
5 | |||
SH605071 |
SCREW 5/16 UNF X 7/8 INCH |
5 |
£0.61 Ex VAT @ 20% |
|||
A57 | WL0208 |
Washer, lock - Timing cover and front engine plate to cylinder blockThis item has been superceded by WS105090853 - see below |
7 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
7 |
£0.25 Ex VAT @ 20% |
|||
A58 | HN2008 |
Nut - Timing cover and front engine plate to cylinder blockThis item has been superceded by NP605081 - see below |
2 | |||
NP605081 |
NUT PLAIN 5/16 UNF |
2 |
£0.17 Ex VAT @ 20% |
|||
A58A | 145385 |
ENGINE MOUNTING BRACKET ASSY.Revington TR information: Our stock is genuine Stanpart. See also 145385SHand 145385SHPC |
2 |
£94.92 Ex VAT @ 20% |
||
145385SH |
Second Hand SUPPORT ENG MOUNT TR5-6 |
2 |
£47.47 Ex VAT @ 20% |
|||
A58B | HU0906 |
Screw, set - Mounting bracket to cylinder blockThis item has been superceded by SH606061 - see below |
8 | |||
SH606061 |
SCREW 3/8 UNF X 3/4 INCH |
8 |
£1.08 Ex VAT @ 20% |
|||
A58C | WL0209 |
Washer, lock - Mounting bracket to cylinder blockThis item has been superceded by WS106111243 - see below |
8 | |||
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
8 |
£0.37 Ex VAT @ 20% |
|||
A58D | 132669 |
Mounting, flexibleRevington TR information: For a competition part with a harder rubber infill, order part number UKC8330 These parts have a metric thread and are therefore supplied with the correct nuts. |
2 |
£22.98 Ex VAT @ 20% |
||
A58E | TN3209 |
Nut, nyloc - Flexible mounting to bracketThis item has been superceded by NY606121 - see below |
4 | |||
NY606121 |
NUT NYLOC HALF 3/8UNF X 3/8" THINRevington TR information: For propshaft and driveshaft applications or where heat might be an issue for nyloc nuts we recommend a stiff nut which is all metal and has a deformed thread to lock it in place. This nut... READ MORE |
4 |
£1.44 Ex VAT @ 20% |
|||
A58F | WP0009 |
Washer, plain - Flexible mounting to bracketThis item has been superceded by WP10613050 - see below |
4 | |||
WP10613050 |
WASHER PLAIN 3/8 X 13/16 INCH NLA use 7/8" |
4 | ||||
A58G | HB0909 |
Bolt - Flexible mounting to chassis frameThis item has been superceded by BH606101 - see below |
4 | |||
BH606101 |
BOLT 3/8 UNF X 1-1/4 INCH |
4 |
£1.36 Ex VAT @ 20% |
|||
A58H | YN2909 |
Nut, nyloc - Flexible mounting to chassis frameThis item has been superceded by NY606151 - see below |
4 | |||
NY606151 |
NUT NYLOC 3/8UNF X 15/32 thick |
4 |
£0.71 Ex VAT @ 20% |
|||
A59 | 211505 |
REAR ENGINE PLATE |
1 | |||
A60 | HU0807 |
Screw, set - Rear engine plate to clyinder blockThis item has been superceded by SH605071 - see below |
7 | |||
SH605071 |
SCREW 5/16 UNF X 7/8 INCH |
7 |
£0.61 Ex VAT @ 20% |
|||
A61 | WL0208 |
Washer, lock - Rear engine plate to clyinder blockThis item has been superceded by WS105090853 - see below |
7 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
7 |
£0.25 Ex VAT @ 20% |
|||
ENGINE LIFTING EYES |
||||||
A62 | 123716 |
Eye, lifting, frontRevington TR information: No longer available consider 123716SH |
1 | |||
123716SH |
Second Hand LIFTING EYERevington TR information: Not currently available |
1 |
£31.72 Ex VAT @ 20% |
|||
A63 | 145987 |
Eye, lifting, rearRevington TR information: This lifting eye fitted to TR250, 5 and 6 engines is no longer available new. Order second hand 145987SH |
1 | |||
145987SH |
Second Hand REAR LIFTING EYE 6 CYL |
1 |
£31.72 Ex VAT @ 20% |
|||
A64 | HU0805 |
Screw, set - Lifting eyes to cylinder blockThis item has been superceded by SH605051 - see below |
4 | |||
SH605051 |
SCREW 5/16 UNF X 5/8 INCH |
4 |
£1.39 Ex VAT @ 20% |
|||
A65 | WL0208 |
Washer, lock - Lifting eyes to cylinder blockThis item has been superceded by WS105090853 - see below |
3 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
3 |
£0.25 Ex VAT @ 20% |
|||
A66 | 121398 |
OIL PRESSURE SWITCHThis item has been superceded by GPS117 - see below |
1 | |||
GPS117 |
OIL PRESSURE SWITCHRevington TR information: Oil pressure switch suitable for TR250, 5, 6-CC, CP and CR. CF TR6 uses GPS113 A high pressure switch is available for those who would prefer earlier warning of impending oil pressure failure. See RTR8353-1 below |
1 |
£11.70 Ex VAT @ 20% |
Also in this listing
Complete Engine and External Assembly