Suspension and steering
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR250 Plate R - FRONT SUSPENSION
<< Return to Triumph Catalogue Plate List
| Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
|---|---|---|---|---|---|---|
 |
R1AA | 307503 |
FRONT SUSPENSION UNIT - Bolt on Disc Wheels R.H. |
1 | ||
|
R1BB | 307504 |
FRONT SUSPENSION UNIT - Bolt on Disc Wheels L.H. |
1 | ||
|
R1CC | 514241 |
FRONT SUSPENSION UNIT - Centre Lock, Wire Wheels R.H. |
1 | ||
|
R1DD | 514242 |
FRONT SUSPENSION UNIT - Centre Lock, Wire Wheels L.H. |
1 | ||
|
R1 | 200659 |
UPPER FULCRUM PIN - INNERRevington TR information: We prefer not sell this part loose, as it is easy to fit the wrong way round. We sell 200659K, which includes a fitting instruction. Consider second hand part 200659SHK or second hand part powder coated... READ MORE |
2 |
£50.26 Ex VAT @ 20% |
|
|
R1A | HU0908 |
Screw, set - Top inner fulcrum pin to chassis frame |
8 | ||
|
R1B | WL0209 |
Washer, lock - Top inner fulcrum pin to chassis frame |
8 | ||
 |
R2 | 133504 |
UPPER WISHBONE ARM ASSEMBLY - FRONTRevington TR information: Consider also second hand part 133504SH or second hand part powder coated 133504SHPC |
2 |
£72.56 Ex VAT @ 20% |
|
 |
R3 | 133507 |
UPPER WISHBONE ARM ASSEMBLY - REARRevington TR information: Consider also second hand part 133507SH or second hand part powder coated 133507SHPC |
2 |
£72.56 Ex VAT @ 20% |
|
 |
R4 | 102228 |
Bush, rubber - Fulcrum pin to wishbone, top innerRevington TR information: Upper inner front suspension wishbone bush, rubber TR2-6, also lower inner bush TR2-3. Our stock is genuine Leyland manufacture, the rubber is therefore significantly higher quality than aftermarket reproduction products. We offer a Superpro Polyurethane improved... READ MORE |
8 |
£3.13 Ex VAT @ 20% |
|
|
R5 | WM0069 |
Washer, plain - Fulcrum pin to wishbone, top inner |
4 | ||
|
R6 | LN2210 |
Nut, slotted - Fulcrum pin to wishbone, top inner |
4 | ||
|
R7 | P00010 |
Pin, cotter - Fulcrum pin to wishbone, top inner |
4 | ||
|
R8 | 142394 |
Ball joint assembly, upper wishbone |
2 | ||
|
R9 | 138509 |
Gaiter, between ball joint and vertical link |
2 |
£9.89 Ex VAT @ 20% |
|
|
RIO | 138869 |
Clip, gaiterRevington TR information: This ring secures the gaiter on GSJ131 ball joint. As it is not available Revington TR recommend using lock wire. We can supply this by the meter RTR5285-16 or a full drum RTR5285-16M |
2 | ||
|
R11 | 501024 |
Nipple, grease, in top of ball joint |
2 | ||
|
R12 | 112347 |
Bolt - Ball joint assembly to upper wishbone arm assembly |
4 |
£4.12 Ex VAT @ 20% |
|
|
R13 | YN2909 |
Nut, nyloc - Ball joint assembly to upper wishbone arm assembly |
4 | ||
|
R14 | WP0045 |
Washer, plain - Ball joint assembly to upper wishbone arm assembly |
4 | ||
|
R14A | 307215 |
VERTICAL LINK - L.H.Revington TR information: Consider original second hand part number 307215SH. . |
1 |
£191.36 Ex VAT @ 20% |
|
|
R15 | 307216 |
VERTICAL LINK - R.H. |
1 |
£191.36 Ex VAT @ 20% |
|
|
R16 | YN2911 |
Nut, nyloc, thin - Vertical link to ball joint |
2 | ||
|
R17 | WP0011 |
Washer, plain - Vertical link to ball joint |
2 | ||
|
R17A | 307211 |
Tie rod lever - R.H.Revington TR information: Consider original second hand part 307211SH, or original second hand part powder coated black 307211SHPC. |
1 | ||
|
R18 | 307212 |
Tie rod lever - L.H.Revington TR information: Consider original second hand part 307212SH or original second hand part powder coated black 307212SHPC |
1 | ||
|
R18A | 133499 |
Plate, mounting disc brake caliper - R.H.Revington TR information: Fitted from commission Number CT4690 (wire wheels), CT4388 (disc wheels) and future. Not currently available, use second hand part 133499SH or second hand part powder coated black 133499SHPC. |
1 | ||
|
R19 | 133500 |
Plate, mounting disc brake caliper - L.H.Revington TR information: Fitted from commission Number CT4690 (wire wheels), CT4388 (disc wheels) and future. Not currently available, use second hand part 133500SH or second hand part powder coated black 133500SHPC |
1 | ||
|
R20 | 118324 |
Bolt - Mounting plates to vertical link |
2 |
£4.58 Ex VAT @ 20% |
|
|
R21 | 113144 |
Bolt - Mounting plates to vertical link |
2 | ||
 |
R22 | 106641 |
Washer, tab - Mounting plates to vertical link |
4 |
£2.76 Ex VAT @ 20% |
|
|
R23 | YN2909 |
Nut, nyloc - Mounting plates to vertical link |
2 | ||
|
R24 | 113143 |
Bolt - Tie rod levers and mounting plates to vertical link |
2 | ||
|
R25 | 112032 |
Bolt - Tie rod levers and mounting plates to vertical link |
2 | ||
|
R26 | 107106 |
Piece, distance - Tie rod levers and mounting plates to vertical linkRevington TR information: This spacer is 24 mm long. Consider also second hand part 107106SH or second hand part powder coated black 107106SHPC. |
4 |
£4.25 Ex VAT @ 20% |
|
|
R27 | YN2909 |
Nut, nyloc - Tie rod levers and mounting plates to vertical link |
4 | ||
|
R27A | TN3209 |
Nut, nyloc - Dust cover tol vertical link |
2 | ||
|
R27B | WP0045 |
Washer, plain - Dust cover tol vertical link |
2 | ||
|
R27C | 125362 |
Nipple, vertica - Dust cover tol vertical link |
2 | ||
|
R28 | 115763 |
STUB AXLE |
2 |
£36.31 Ex VAT @ 20% |
|
|
R29 | WP0011 |
Washer, plain - Stub axle to vertical link |
2 | ||
|
R30 | TN3211 |
Nut, thin nyloc - Stub axle to vertical link |
2 | ||
|
R31 | 207194 |
Seal, oil, assembly |
2 | ||
|
R31A | 100867 |
Seal, felt |
1 |
£4.25 Ex VAT @ 20% |
|
|
R31B | 100868 |
Retainer, felt seal |
1 |
£1.73 Ex VAT @ 20% |
|
|
R32 | 100573 |
Bearing, inner, front hub |
2 | ||
|
R33 | 114284 |
Hub assembly, frontTriumph Catalogue Remarks: Disc wheels only |
2 |
£260.47 Ex VAT @ 20% |
|
|
R34 | 114282 |
Stud, wheelRevington TR information: This wheel stud which is 32mm long (measured from under the head), presses into the hub and is used at the front of TR3 (Disc brake cars) throughout the range to TR6 fitted with steel wheels.... READ MORE |
8 |
£6.53 Ex VAT @ 20% |
|
|
R35 | 114283 |
Hub assembly, front |
2 | ||
|
R36 | 114281 |
Stud, wheelRevington TR information: This wheel stud which presses into the hub is used at the front of TR3 (Disc brake cars) throughout the range to TR6 fitted with wire wheels. Stud 114281 is specifically intended for the front only... READ MORE |
8 |
£6.66 Ex VAT @ 20% |
|
|
R36A | 202446 |
Extension, hub - R.H.Triumph Catalogue Remarks: Wire wheels only |
1 | ||
|
R37 | 202447 |
Extension, hub - L.H. |
1 | ||
|
R38 | 110366 |
Nut, extension to hubRevington TR information: Nut, wire wheels only TR2-TR6 attaching the adapter to the hub. Consider original second hand part number 110366SH. Steel wheel TR2-6 early (when covered by a wheel trim) use a larger nut 109586. Later TR6 with... READ MORE |
8 |
£2.66 Ex VAT @ 20% |
|
|
R39 | 100536 |
Bearing, outer |
2 | ||
|
R40 | 102690 |
Washer, 'D' - Front hub to stub axle |
2 |
£5.09 Ex VAT @ 20% |
|
 |
R41 | LN2211 |
Nut, slotted - Front hub to stub axleRevington TR information: Some nuts are too thick and do not fit under the cap. We have sourced the correct height nut that fits correctly. |
2 |
£4.38 Ex VAT @ 20% |
|
|
R42 | P00020 |
Pin, cotter - Front hub to stub axle |
2 | ||
|
R43 | 102689 |
Cap, grease retainingRevington TR information: Grease cap. consider second hand part 102689SH |
2 |
£7.48 Ex VAT @ 20% |
|
|
R43A | 142377 |
BOTTOM TRUNNION ASSEMBLY - R.H.Revington TR information: consider second hand part 142377SH For the trunnion seal kits see Superpro polyurethane kits below. |
1 |
£112.52 Ex VAT @ 20% |
|
|
R44 | 142378 |
BOTTOM TRUNNION ASSEMBLY - L.H.Revington TR information: consider second hand part 142378SH For the trunnion seal kits see Superpro polyurethane kit below. |
1 |
£112.52 Ex VAT @ 20% |
|
|
R45 | 142403 |
Stop, steering lock |
2 | ||
|
R46 | HU0811 |
Screw, set - Steering lock stop to bottom trunnion |
2 | ||
|
R47 | WL0222 |
Washer, lock - Steering lock stop to bottom trunnion |
2 | ||
|
R48 | 056934 |
Nipple, grease, bottom trunnion |
2 |
£2.41 Ex VAT @ 20% |
|
|
R49 | 142402 |
Seal, oil, between trunnion and vertical linkRevington TR information: Use the Superpro polyurethane version SPF2253K for longer life. |
2 |
£11.57 Ex VAT @ 20% |
|
|
R50 | 307210 |
LOWER WISHBONE ARM ASSEMBLY - FRONT R.H. AND REAR L.H.Revington TR information: Consider also second hand part 307210SH or second hand part powder coated 307210SHPC |
2 |
£111.76 Ex VAT @ 20% |
|
 |
R51 | 307209 |
LOWER WISHBONE ARM ASSEMBLY - FRONT L.H. AND REAR R.H.Revington TR information: TR4A-6 Lower Wishbone, left hand front and right hand back. Original part Leyland packaged. Consider also second hand part 307209SH or second hand part powder coated 307209SHPC |
2 |
£108.49 Ex VAT @ 20% |
|
|
R52 | 139835 |
Bolt, pivot - Lower trunnion to lower wishbone |
2 |
£9.80 Ex VAT @ 20% |
|
|
R53 | 139832 |
Piece, distance - Lower trunnion to lower wishboneRevington TR information: Our stock of this sleeve is genuine British Leyland or stainless steel part 139832SS. Consider also trunnion bush kit FSK6TK, two required per car |
4 |
£10.55 Ex VAT @ 20% |
|
|
R54 | 139833 |
Bearing, nylon - Lower trunnion to lower wishboneRevington TR information: This nylon bush is available separately under this part number or in trunnion bush kit FSK6TUK. Superpro Polyurethane offer an improved kit SPF1844K Full kits for the front suspension are available too. |
8 |
£5.36 Ex VAT @ 20% |
|
|
R55 | 142388 |
Washer, backing - Lower trunnion to lower wishboneRevington TR information: This washer is available separately under this part number or in trunnion bush kit FSK6TUK. Our stock is genuine Leyland. Superpro Polyurethane offer an improved kit SPF1844K Full kits for the front suspension are available too.... READ MORE |
8 |
£2.66 Ex VAT @ 20% |
|
|
R56 | 142387 |
Ring, sealing - Lower trunnion to lower wishboneRevington TR information: This ring is available separately under this part number or in trunnion bush kit FSK6TUK. Superpro Polyurethane offer an improved bush kit SPF1844K Full kits for the front suspension are available too. |
8 |
£3.12 Ex VAT @ 20% |
|
|
R57 | 139834 |
Shield, water - Lower trunnion to lower wishboneRevington TR information: This shield is available separately under this part number or in trunnion bush kit FSK6TUK. Our stock is genuine Leyland. Superpro Polyurethane offer an improved bush kit SPF1844K Full kits for the front suspension are available... READ MORE |
8 |
£2.27 Ex VAT @ 20% |
|
|
R58 | LN2212 |
Nut - Lower trunnion to lower wishbone |
2 |
£7.18 Ex VAT @ 20% |
|
|
R59 | P00012 |
Pin, cotter - Lower trunnion to lower wishbone |
2 | ||
|
R60 | 148691 |
Bracket assembly, lower fulcrum, innerRevington TR information: TR4A-6 Bracket Front Suspension lower fulcrum. This part has two attachment bolts. Some aftermarket new parts are dimensionaly inaccurate. Use our powder-coated original parts, second hand parts or uprated part RTR3287. We have been... READ MORE |
4 |
£31.50 Ex VAT @ 20% |
|
|
R61 | 141481 |
Bush - Lower wishbone to mounting bracketRevington TR information: Superpro Polyurethane kit SPF0288K offers a much improved ride and considerably longer life. We also have 141481UK, which is a Nylatron kit |
4 |
£2.78 Ex VAT @ 20% |
|
|
R62 | HB1121 |
Bolt - Lower wishbone to mounting bracket |
4 | ||
|
R63 | YN2911 |
Nut, nyloc - Lower wishbone to mounting bracket |
4 | ||
|
R64 | 139727 |
Shim - Bracket to chassis frameRevington TR information: Shim adjusting, steel, front suspension TR4A-6. Revington suggest as an alternative, you use second hand part 139727SH or stainless steel part 139727SH . |
A/R |
£6.16 Ex VAT @ 20% |
|
|
R65 | YN2909 |
Nut, nyloc - Bracket to chassis frame |
4 | ||
|
R66 | WM0059 |
Washer, plain - Bracket to chassis frame |
4 |
£0.55 Ex VAT @ 20% |
|
|
R67 | 140951 |
LOWER SPRING PAN ASSEMBLYRevington TR information: This part is no longer available new. Please order second hand part 140951SH or powder coated second hand part 140951SHPC |
2 | ||
|
R67A | 101961 |
Screw, retaining rebound abutment bracket |
8 | ||
|
R68 | HB0916 |
Bolt - Spring pan assembly to lower wishbone |
8 | ||
|
R69 | 143712 |
Stud - Spring pan assembly to lower wishbone |
8 |
£2.66 Ex VAT @ 20% |
|
|
R70 | YN2909 |
Nut, nyloc - Spring pan assembly to lower wishbone |
12 | ||
|
R71 | WP0020 |
Washer, plain - Spring pan assembly to lower wishbone |
12 | ||
|
R72 | 213165 |
FRONT ROAD SPRINGRevington TR information: Standard late TR6 spring rated at 312 lbs/in. Coded with one GREEN and one BLUE stripe. |
2 | ||
|
R73 | 100751 |
Washer, rubber, both ends of springRevington TR information: Revington TR recommends using the superior Superpro Polyurethane product SPF1028K. A thicker version SPF1028-5K is available too to enable corner height adjustments to be made. We also have second hand parts 100751SH. . |
4 |
£2.76 Ex VAT @ 20% |
|
|
R74 | 149060 |
FRONT SHOCK ABSORBER |
2 | ||
|
R74A | 149518 |
FRONT SHOCK ABSORBER - ADJUSTABLETriumph Catalogue Remarks: Special orders |
2 | ||
|
R75 | 119450 |
Rubber, mounting - LowerRevington TR information: Superpro Polyurethane offer an improved kit whic lasts much longer than rubber. Please see SPF0476K below |
2 | ||
|
R76 | 142444 |
Rubber, mounting - Upper |
4 | ||
|
R77 | 140416 |
Washer - Shock absorber upper attachmentRevington TR information: Flat washer 7/16" internal diameter, 1-5/8" external diameter, 0.164" thick Can use stainless steel washer WP107261572 or cupped washer TBC |
2 |
£1.55 Ex VAT @ 20% |
|
|
R78 | 140479 |
Washer - Shock absorber upper attachmentRevington TR information: Flat washer 3/8" internal diameter, 1-5/8" external diameter, 0.150" thick Can use stainless steel washer WP106261252 or cupped washer ACA5759 |
2 |
£1.38 Ex VAT @ 20% |
|
|
R79 | HN2009 |
Nut - Shock absorber upper attachment |
2 | ||
|
R80 | JN2109 |
Nut, jam - Shock absorber upper attachment |
2 | ||
|
R81 | 106843 |
Bracket, shock absorberRevington TR information: Lower damper support plain (without tube) fitted to TR2-6. Consider second hand part 106843SH or second hand part powder coated black 106843SHPC. TR2-4 utilise a cover bracket 106844 below this part to act on the rebound... READ MORE |
4 |
£12.80 Ex VAT @ 20% |
|
|
R82 | HB1019 |
Bolt - Shock absorbers to fulcrum brackets |
2 | ||
|
R83 | TN3210 |
Nut, nyloc - Shock absorbers to fulcrum brackets |
2 | ||
|
R84 | HN2009 |
Nut - Fulcrum brackets to spring pan |
8 | ||
|
R85 | WL0209 |
Washer, lock - Fulcrum brackets to spring pan |
8 |
