Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR3 Plate J - CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER.
<< Return to Triumph Catalogue Plate List
| Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
|---|---|---|---|---|---|---|
 |
J1AA | 070380 |
CLUTCH COVER ASSEMBLY- BALL THROW-OUT TYPEThis item has been superceded by GCC127 - see below |
1 | ||
|
GCC127 |
TR2-4 CLUTCH COVER ASSYRevington TR information: We also offer an exchange part, see GCC127EX. We also have a collection of near new parts which we sell under part number GCC127SH |
1 |
£186.65 Ex VAT @ 20% |
||
|
J1 | 052399 |
Cover, clutchRevington TR information: Use GCC127 |
1 | ||
|
J2 | 046032 |
Plate, pressure |
1 | ||
|
J3 | 048650 |
Spring, thrust, cream |
9 | ||
|
J4 | 501132 |
Eyebolt, release lever |
3 | ||
|
J5 | 042537 |
Pin, release lever |
3 | ||
|
J6 | 501211 |
Lever, release |
3 | ||
|
J7 | 041326 |
Strut, release lever |
3 | ||
|
J8 | 500992 |
Spring, anti-rattle |
3 | ||
|
J9 | 501131 |
Nut, eyebolt to cover |
3 | ||
|
J10 | 112457 |
DRIVEN PLATE ASSEMBLYTriumph Catalogue Remarks: From Comm. No. TS1 |
1 | ||
|
116638 |
DRIVEN PLATE ASSEMBLYRevington TR information: consider exchange part 116638EX. We also have very good second hand parts 116638SH too. |
1 |
£106.98 Ex VAT @ 20% |
||
|
J10A | 116638 |
DRIVEN PLATE ASSEMBLYTriumph Catalogue Remarks: From Comm. No. TS18477 |
1 |
£106.98 Ex VAT @ 20% |
|
|
116638SH |
Second Hand CLUTCH PLATE TR2/4Triumph Catalogue Remarks: From Comm. No. TS18477 |
1 |
£32.78 Ex VAT @ 20% |
||
|
J11 | 059621 |
Facing, package |
1 | ||
|
J11A | DP0407 |
Dowel, locating clutch cover on flywheelThis item has been superceded by DP414 - see below |
2 | ||
|
DP414 |
DOWEL STOCK CUTTO FIT 1/4" |
2 |
£1.96 Ex VAT @ 20% |
||
|
J11B | HU0856 |
Screw, set, clutch cover to flywheelThis item has been superceded by SH505061 - see below |
6 | ||
|
SH505061 |
SCREW 5/16 UNC X 3/4 INCH |
6 |
£0.90 Ex VAT @ 20% |
||
|
J11C | WL0208 |
Washer, spring, on setscrewsThis item has been superceded by WS105090853 - see below |
6 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
6 |
£0.25 Ex VAT @ 20% |
||
|
J12 | 501608 |
CLUTCH THROW-OUT BEARINGRevington TR information: This item has a secondhand part available - see below |
1 |
£36.72 Ex VAT @ 20% |
|
|
501608SH |
RELEASE BRG CLUTCH TR2/4 |
1 |
£30.25 Ex VAT @ 20% |
||
|
J12A | 100159 |
Sleeve, clutch throw-out |
1 | ||
|
J13 | 106022 |
CLUTCH OPERATING FORKRevington TR information: The operating pins are included in this part number. If just the operating pins are required, these can be bought separately under part number 100164. Revington TR recommend drilling through this fork, through the shaft and... READ MORE |
1 |
£67.82 Ex VAT @ 20% |
|
|
106022SH |
Second Hand FORK CLUTCH RELEASE TR2-6 |
1 |
£34.19 Ex VAT @ 20% |
||
|
J14 | 056965 |
Pin, taper, fork to clutch shaftThis item has been superceded by 158777HD - see below |
1 | ||
|
158777HD |
PIN TAPER CLUTCH HEAVY DUTYRevington TR information: This is a hardened taper pin holding the fork to the cross shaft. This help overcome the frequent failure of this pin. Revington TR recommend drilling through the fork, through the shaft and out the other... READ MORE |
1 |
£17.27 Ex VAT @ 20% |
||
|
J14A | 030047 |
Wire, locking taper pinThis item has been superceded by RTR5285-2M - see below |
1 | ||
|
RTR5285-2M
|
LOCKING WIRE 1.02mm/MRevington TR information: Locking wire stainless steel 1.02mm dia. per meter |
1 |
£1.45 Ex VAT @ 20% |
||
|
J15 | 108893 |
CLUTCH OPERATING SHAFTTriumph Catalogue Remarks: From Comm. No. TS1 |
1 | ||
|
108887 |
CLUTCH OPERATING SHAFTRevington TR information: Consider second hand part 108887SH. TR 250,5 and 6 use a slightly diferent shaft 136354. Use roll pin RPS230331 to securely pin the fork to the cross shaft at 90° and to one side of the... READ MORE |
1 |
£92.38 Ex VAT @ 20% |
||
|
J15A | 108887 |
CLUTCH OPERATING SHAFTTriumph Catalogue Remarks: From Comm. No. TS8637 |
1 |
£92.38 Ex VAT @ 20% |
|
|
108887SH |
Second Hand CLUTCH X-SHAFT TR2/4 GREASEABLE.Triumph Catalogue Remarks: From Comm. No. TS8637 |
1 |
£48.54 Ex VAT @ 20% |
||
|
J16 | 105752 |
Spring, on shaftRevington TR information: This item has a secondhand part available - see below |
1 |
£4.12 Ex VAT @ 20% |
|
|
105752SH |
CLUTCH SHAFT SPRING |
1 |
£2.12 Ex VAT @ 20% |
||
|
J17 | 500098 |
Nipple, grease, shaft endsThis item has been superceded by RTR5080 - see below |
2 | ||
|
RTR5080
|
GREASE NIPPLE 1/4 UNF 45 DEGREERevington TR information: 1/4" UNF 45º |
2 |
£1.60 Ex VAT @ 20% |
||
|
J17A | WF0507 |
Washer, fibre, under nippleThis item has been superceded by WF10406062 - see below |
2 | ||
|
WF10406062 |
WASHER FIBRE 1/4 ID X 3/8 OD |
2 |
£0.52 Ex VAT @ 20% |
||
|
118 | 102805 |
Bolt, locating shaft in housingRevington TR information: This special bolt has a 0.94" long shank and is used to secure the clutch release mechanism cross-shaft in the bell housing on TR2-4A. Not available new. Use second hand part 102805SH. Alternatively a standard bolt... READ MORE |
1 | ||
|
102805SH |
CLUTCH LOC. BOLT SECOND HAND |
1 |
£7.34 Ex VAT @ 20% |
||
|
J19 | WL0208 |
Washer, spring, on boltThis item has been superceded by WS105090853 - see below |
1 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
1 |
£0.25 Ex VAT @ 20% |
||
|
J20 | 105756 |
CLUTCH SLAVE CYLINDER ASSEMBLYTriumph Catalogue Remarks: From Comm. No. TS1 up to TS13045 only |
1 | ||
|
109746 |
CLUTCH SLAVE CYLINDER ASSEMBLYRevington TR information: Consider second hand part 109746SH. The seal kit for this cylinder is Part number 502281. A useful alternative is the TR6 slave cylinder UKC8677 which is 1" diameter. This needs to be fitted the other side of... READ MORE |
1 |
£57.38 Ex VAT @ 20% |
||
|
J20A | 109746 |
CLUTCH SLAVE CYLINDER ASSEMBLYTriumph Catalogue Remarks: From Comm. No. TS3574 up to TS13045 only |
1 |
£57.38 Ex VAT @ 20% |
|
|
109746SH |
CYLINDER SLAVE TR2-3 Second HandTriumph Catalogue Remarks: From Comm. No. TS3574 up to TS13045 only |
1 |
£30.36 Ex VAT @ 20% |
||
|
J20B | 501198 |
Barrel, cylinderTriumph Catalogue Remarks: From Comm. No. TS1 up to TS13045 only |
1 | ||
|
J20C | 502140 |
Barrel, cylinderTriumph Catalogue Remarks: From Comm. No. TS3574 up to TS13045 only |
1 | ||
|
J21 | 501207 |
Screw, bleed cylinder barrelTriumph Catalogue Remarks: From Comm. No. TS1 up to TS13045 only |
1 |
£3.62 Ex VAT @ 20% |
|
|
J22 | 501554 |
Spring, between barrel and cup fillerTriumph Catalogue Remarks: From Comm. No. TS1 up to TS13045 only |
1 | ||
|
J23 | 501202 |
Filler, cupTriumph Catalogue Remarks: From Comm. No. TS1 up to TS13045 only |
1 | ||
|
502281 |
SEAL KIT CLUTCH SLAVE 1-1/8" TR2-3Revington TR information: The seal is available separatly. Order part number 7H7053 |
1 |
£12.31 Ex VAT @ 20% |
||
|
J24 | 501200 |
CupTriumph Catalogue Remarks: From Comm. No. TS1 up to TS13045 only |
1 | ||
|
7H7053 |
SEAL CUP ONLY S/CYL TR2 LOCKHEED |
1 |
£7.25 Ex VAT @ 20% |
||
|
J25 | 501201 |
PistonTriumph Catalogue Remarks: From Comm. No. TS1 up to TS13045 only |
1 | ||
|
J25A | 502141 |
Circlip, piston retainingTriumph Catalogue Remarks: From Comm. No. TS3574 up to TS13045 only |
1 | ||
|
J26 | 501204 |
Boot, over end of cylinder barrelTriumph Catalogue Remarks: From Comm. No. TS1 up to TS13045 only |
1 | ||
|
J27 | 501205 |
Clip, boot, smallTriumph Catalogue Remarks: From Comm. No. TS1 up to TS13045 only |
1 | ||
|
J28 | 501206 |
Clip, boot, largeTriumph Catalogue Remarks: From Comm. No. TS1 up to TS13045 only |
1 | ||
|
J29 | 501199 |
Rod, pushTriumph Catalogue Remarks: From Comm. No. TS1 up to TS13045 only |
1 | ||
|
504852 |
Rod, push |
1 |
£8.86 Ex VAT @ 20% |
||
|
J29A | 114531 |
CLUTCH SLAVE CYLINDER ASSEMBLYTriumph Catalogue Remarks: From Comm. No. TS13046 |
1 | ||
|
516788 |
CYL SLAVE CLUTCH 3G-4A GIR 1"Revington TR information: A repair kit 505704 is available. Slave cylinder only. Push rod not included. |
1 |
£46.86 Ex VAT @ 20% |
||
|
J29B | 504847 |
Body, cylinderTriumph Catalogue Remarks: From Comm. No. TS13046 |
1 | ||
|
J29C | 108756 |
Screw, bleed, cylinder bodyTriumph Catalogue Remarks: From Comm. No. TS13046 |
1 | ||
|
556508A |
BLEED SCREW-IMPERIAL 3/8 X 24 |
1 |
£2.14 Ex VAT @ 20% |
||
|
J29D | 105676 |
Cover, dust, over bleed screwTriumph Catalogue Remarks: From Comm. No. TS13046 |
1 | ||
|
SMP100030 |
DUST CAP BLEED NIPPLERevington TR information: Bleed nipple cap. |
1 |
£1.30 Ex VAT @ 20% |
||
|
J29E | 106084 |
Spring, between piston seal and cylinder bodyTriumph Catalogue Remarks: From Comm. No. TS13046 |
1 | ||
|
J29F | 504849 |
Seal, pistonTriumph Catalogue Remarks: From Comm. No. TS13046 |
1 | ||
|
505704 |
KIT CLUTCH SLAVE TR3A-4A 1"DIAMRevington TR information: This repair kit services original slave cylinder 516788, which is 1" diameter. Some after market cylinders are 7/8" for which we have a kit GRK4009. Please check which kit you require before ordering. Click 'MORE' for... READ MORE |
1 | |||
|
J29G | 504848 |
PistonTriumph Catalogue Remarks: From Comm. No. TS13046 |
1 | ||
|
J29H | 504850 |
Circlip, piston stopTriumph Catalogue Remarks: From Comm. No. TS13046 |
1 | ||
|
J29I | 504851 |
Cover, dust, cylinder bodyTriumph Catalogue Remarks: From Comm. No. TS13046 |
1 | ||
|
J29J | 504852 |
Rod, pushTriumph Catalogue Remarks: From Comm. No. TS13046 |
1 |
£8.86 Ex VAT @ 20% |
|
|
J29K | 057193 |
FORK-END ASSEMBLY (Push rod to clutch shaft)This item has been superceded by 057194K - see below |
1 | ||
 |
057194K |
FORK ASSEMBLY WITH PIN and spring TR3-3B M/cyl rod & TR2-4 clutchRevington TR information: This fork assembly suits a 5/16" UNF shaft and is used on the TR2-4A clutch slave cylinder shaft and TR3A-B master cylinder shafts. It consists of a fork CF523572 and a pin and spring assembly 216421A... READ MORE |
1 |
£20.06 Ex VAT @ 20% |
||
|
J30 | 057194 |
Fork-endThis item has been superceded by CF15238199 - see below |
1 | ||
|
CF15238199 |
CLEVIS SPECIAL 5/16"UNFx1-7/16" long 19/64" pin with 1/2" BSF thread (057194)Revington TR information: this clevis forms part of assembly 057194K. An alternative longer plain clevis is available where needed. CF15305201K |
1 |
£12.42 Ex VAT @ 20% |
||
|
J31 | 057195 |
Pin, clevis, fork-end to shaftRevington TR information: This part is available on its own, the spring and pin are also available as assembly 216421A. The clevis, pin and spring are available as an assembly wi the fork as part number 057194K. All the... READ MORE |
1 |
£8.95 Ex VAT @ 20% |
|
|
J32 | 057240 |
Spring, on pinRevington TR information: This part is available on its own, the spring and pin as an assembly are available as 216421A. The clevis, pin and spring along with the clevis fork are available as an assembly, part number 057194K.... READ MORE |
1 |
£2.56 Ex VAT @ 20% |
|
|
J32A | PC0035 |
Pin, split, retaining clevis pinThis item has been superceded by PS106121 - see below |
1 | ||
|
PS106121 |
SPLIT PIN 3/32 X 1-1/2 INCH |
1 |
£0.26 Ex VAT @ 20% |
||
|
J33 | JN2108 |
Nut, locking fork-end on push rodThis item has been superceded by NP605061 - see below |
1 | ||
|
NP605061 |
NUT PLAIN 5/16 UNF X 3/16" |
1 |
£0.46 Ex VAT @ 20% |
||
 |
J34 | 027645 |
Spring, return, clutch shaftTriumph Catalogue Remarks: From Comm. No. _______ |
1 |
£5.16 Ex VAT @ 20% |
|
|
J34A | 043929 |
Spring, return, clutch shaftTriumph Catalogue Remarks: From Comm. No. 33944 |
1 | ||
|
027645 |
Spring, return, clutch shaftRevington TR information: Heavy spring 88mm long. Our stock is genuine Leyland |
1 |
£5.16 Ex VAT @ 20% |
||
|
J35 | 106347 |
Plate, anchor, return spring |
1 |
£3.68 Ex VAT @ 20% |
|
|
J36 | 106701 |
SLAVE CYLINDER SUPPORT BRACKETTriumph Catalogue Remarks: From Comm. No. _______ |
1 | ||
|
106701SH |
Second Hand BRACKET SLAVE CYLINDERTriumph Catalogue Remarks: From Comm. No. _______ |
1 |
£42.10 Ex VAT @ 20% |
||
|
J36A | 128042 |
SLAVE CYLINDER SUPPORT BRACKETTriumph Catalogue Remarks: From Comm. No. _______ |
1 |
£20.03 Ex VAT @ 20% |
|
|
128042SH |
Second Hand BRACKETSLAVE CYLINDER TR4Triumph Catalogue Remarks: From Comm. No. _______ |
1 |
£28.85 Ex VAT @ 20% |
||
|
J37 | HB0809 |
Bolt, slave cylinder to support bracketThis item has been superceded by SH605091 - see below |
1 | ||
|
SH605091 |
SCREW 5/16 UNF X 1-1/8 INCH |
1 |
£1.22 Ex VAT @ 20% |
||
|
J38 | HN2008 |
Nut, securing boltThis item has been superceded by NP605081 - see below |
1 | ||
|
NP605081 |
NUT PLAIN 5/16 UNF |
1 |
£0.17 Ex VAT @ 20% |
||
|
J39 | WL0208 |
Washer, spring, under nutThis item has been superceded by WS105090853 - see below |
1 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
1 |
£0.25 Ex VAT @ 20% |
||
|
J40 | 106702 |
Stay, slave cylinderTriumph Catalogue Remarks: From Comm. No. _______ |
1 | ||
|
J40A | 128043 |
Stay, slave cylinderTriumph Catalogue Remarks: From Comm. No. _______ |
1 | ||
|
J41 | YN2908 |
Nut, nyloc, stay attachmentThis item has been superceded by NY605141 - see below |
1 | ||
|
NY605141 |
NYLOC 5/16 UNF X 7/16 THICKRevington TR information: Nyloc Nut tall version. This Nyloc nut is used in locations where extra thread depth is desirable. |
1 | |||
|
J41A | HN2008 |
Nut, hex., stay attachmentThis item has been superceded by NP605081 - see below |
1 | ||
|
NP605081 |
NUT PLAIN 5/16 UNF |
1 |
£0.17 Ex VAT @ 20% |
