Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR4 Plate A - ENGINE: CYLINDER BLOCK AND HEAD.
<< Return to Triumph Catalogue Plate ListPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
A1AA | 510914 |
ENGINE UNIT 86 mm |
||||
A1BB | 510915 |
ENGINE UNIT 83 mm |
1 | |||
A1CC | 510924 |
DECARBONISING SET 86 mmThis item has been superceded by GEG178 - see below |
1 | |||
GEG178 |
GASKET SET HEAD TR2-4A 86MM, HIGH PORTRevington TR information: This is the top gasket set reqired when 86mm pistons and liners are used. High port. You may also consider the "conversion set" that includes the bottom set and front engine plate gaskets and front cover... READ MORE |
1 |
£36.91 Ex VAT @ 20% |
|||
A1DD | 505281 |
DECARBONISING SET 83 mmRevington TR information: TR2-4A Cylinder head gasket set high port 1991cc (83mm). 83mm was an option up to TR4A but rarely taken up. The 83mm gasket is no longer available and the set includes an 86mm gasket. This gasket... READ MORE |
1 |
£101.03 Ex VAT @ 20% |
||
A1EE | 509827 |
SUPPLEMENTARY ENGINE GASKET SET (To be used in conjunction with Decarbonising Set for complete Engine strip)This item has been superceded by GEG248 - see below |
1 | |||
GEG248 |
GASKET SET CONVERSION TR2/4A - BOTTOM ENDRevington TR information: This is a bottom end gasket set. Head gasket set and front cover seal are also required for a full engine gasket set. |
1 |
£42.20 Ex VAT @ 20% |
|||
A1 | 202817 |
CYLINDER BLOCK 86 mm |
1 | |||
A1A | 502363 |
CYLINDER BLOCK 83 mmRevington TR information: not available new, use second hand part 502363SH |
1 | |||
A2 | Cap, bearing FrontTriumph Catalogue Remarks: Not serviced |
|||||
A2A | Cap, bearing CentreTriumph Catalogue Remarks: Not serviced |
|||||
A3 | Cap, bearing RearTriumph Catalogue Remarks: Not serviced |
|||||
A4 | 058335 |
Packing, felt, rear bearing cap |
2 |
£6.31 Ex VAT @ 20% |
||
A5 | 057121 |
Screw, set Bearing caps to block |
6 |
£7.34 Ex VAT @ 20% |
||
A6 | 101587 |
Washer, spring Bearing caps to blockThis item has been superceded by WS108143133 - see below |
6 | |||
WS108143133 |
WASHER SPRING 1/2" RECT SECTION |
6 |
£0.16 Ex VAT @ 20% |
|||
A7 | 056405 |
Bush, oil pump drive shaftRevington TR information: use second hand part 056405SH |
1 | |||
A7A | 044473 |
Plug, core, rear of camshaft |
1 |
£3.22 Ex VAT @ 20% |
||
A7B | 056765 |
Plug, core, oil gallery endsRevington TR information: TR2-4A oil gallery end plugs, part number 056765, are screwed into the block and must be removed and replaced during an engine rebuild to ensure the oil gallery can be cleaned properly. Price per plug not... READ MORE |
2 |
£8.04 Ex VAT @ 20% |
||
A8 | 102785 |
Screw, setRevington TR information: May need to consider second hand. |
3 | |||
A9 | 500463 |
Washer, copper Oil gallery sideThis item has been superceded by WC10711064 - see below |
3 | |||
WC10711064 |
WASHER COPPER 7/16 x 11/16 x .064 |
3 |
£0.89 Ex VAT @ 20% |
|||
A9A | HU0954 |
Screw, set Oil gallery sideThis item has been superceded by SH506041 - see below |
1 | |||
SH506041 |
SCREW 3/8 UNC X 1/2 INCH |
1 |
£1.60 Ex VAT @ 20% |
|||
A9B | 500464 |
Washer, copper Oil gallery sideThis item has been superceded by WC10610080 - see below |
||||
WC10610080 |
WASHER COPPER 3/8 X 5/8 X .080" |
£1.81 Ex VAT @ 20% |
||||
A10 | 061478 |
Tap, water drainRevington TR information: Brass Drain tap with a parallel 1/2"UNF thread, used in the engine block of TR2-5 to drain the coolant. This tap can be used on later TR's instead of the standard blanking plug, or indeed in... READ MORE |
1 |
£24.19 Ex VAT @ 20% |
||
A11 | WF0511 |
Washer, fibre, water drain tapThis item has been superceded by WF10812062 - see below |
1 | |||
WF10812062 |
WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK |
1 |
£0.70 Ex VAT @ 20% |
|||
A12 | 113570 |
Stud, cylinder head attachment, front and centre of block-R.H. sideRevington TR information: 1/2"UNC |
2 |
£21.97 Ex VAT @ 20% |
||
A13 | 121734 |
Stud, cylinder head attachment, rear of block-R.H. side |
1 |
£36.85 Ex VAT @ 20% |
||
A14 | 113169 |
Stud, cylinder head attachment, adjacent to centre of cylinder head-R.H. side |
2 |
£19.90 Ex VAT @ 20% |
||
A15 | 106959 |
Stud, cylinder head attachment, front, centre and rear of block- L.H. sideRevington TR information: Head stud for various applications from TR2 - TR4A |
3 |
£17.27 Ex VAT @ 20% |
||
A16 | 106960 |
Stud, cylinder head attachment, adjacent to centre of cylinder head-L.H. side |
2 |
£17.64 Ex VAT @ 20% |
||
A16A | V7318 |
Stud, oil pump attachmentThis item has been superceded by ST705111 - see below |
3 | |||
ST705111 |
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC |
3 |
£1.38 Ex VAT @ 20% |
|||
A17 | V7322 |
Stud, petrol pump attachmentThis item has been superceded by ST705111 - see below |
2 | |||
ST705111 |
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC |
2 |
£1.38 Ex VAT @ 20% |
|||
A18 | V7322 |
Stud, distributor pedestal attachmentThis item has been superceded by ST705111 - see below |
2 | |||
ST705111 |
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC |
2 |
£1.38 Ex VAT @ 20% |
|||
A19 | V7318 |
Stud, front engine plate and timing cover attachmentThis item has been superceded by ST705111 - see below |
1 | |||
ST705111 |
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC |
1 |
£1.38 Ex VAT @ 20% |
|||
A20 | DP0512 |
Dowel, locating front engine plateThis item has been superceded by DP514 - see below |
2 | |||
DP514 |
DOWEL 5/16 DIA X 7/8" LONG |
2 |
£1.78 Ex VAT @ 20% |
|||
A21 | V7318 |
Stud, gearbox attachmentThis item has been superceded by ST705111 - see below |
3 | |||
ST705111 |
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC |
3 |
£1.38 Ex VAT @ 20% |
|||
A21A | DP0612 |
Dowel, locating gearbox on rear face of cylinder blockThis item has been superceded by DP619 - see below |
2 | |||
DP619 |
DOWEL 3/8" DIA x 1.5" LONG Cut to fitRevington TR information: This dowel is used on 6 cylinder engines to locate crankshaft to flywheel. To determine length required, measure into the crankshaft and into the flywheel and add these together then subtract 1mm for clearance. |
2 |
£3.00 Ex VAT @ 20% |
|||
A22 | 112170 |
Stud Oil filter (pressure) attachment lower frontThis item has been superceded by ST705171 - see below |
1 | |||
ST705171 |
STUD 5/16 UNC/UNF2-1/8 |
1 |
£2.47 Ex VAT @ 20% |
|||
A22A | DN3408 |
Nut, cap Oil filter (pressure) attachment lower frontThis item has been superceded by 14B2685 - see below |
1 | |||
14B2685 |
NUT DOME 5/16 UNF CHROME |
1 |
£2.39 Ex VAT @ 20% |
|||
A23 | 112233 |
Bolt, oil filter (pressure) attachment, upper frontThis item has been superceded by BH505101 - see below |
1 | |||
BH505101 |
BOLT 5/16 UNC X 1-1/4 INCH |
1 |
£1.22 Ex VAT @ 20% |
|||
A24 | 112231 |
Bolt, oil filter (pressure) attachment, upper rearThis item has been superceded by BH505321 - see below |
1 | |||
BH505321 |
BOLT 5/16 UNC X 4 INCH |
1 |
£4.18 Ex VAT @ 20% |
|||
A25 | 112232 |
Bolt, oil filter (pressure) attachment, lower rearThis item has been superceded by BH505241 - see below |
1 | |||
BH505241 |
BOLT 5/16 UNC X 3 INCH |
1 |
£2.28 Ex VAT @ 20% |
|||
A25A | WL0208 |
Washer, lock, fitted on boltsThis item has been superceded by WS105090853 - see below |
3 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
3 |
£0.25 Ex VAT @ 20% |
|||
A26 | 055810 |
FRONT SEALING BLOCKRevington TR information: Sealing block, front of engine Tr2-4A. Consider original second hand part 055810SH |
1 | |||
A27 | 059381 |
Pad, sealing, in ends of block |
2 |
£1.21 Ex VAT @ 20% |
||
A28 | 056574 |
Screw, sealing block attachment |
2 |
£2.05 Ex VAT @ 20% |
||
A29 | 060862 |
REAR OIL SEAL ASSEMBLYRevington TR information: This original oils seal arrangement is prone to severe leakage. This is due the inherent weakness of the reverse scroll design, where there is no physical contact between the seal and the crankshaft. The reverse scroll... READ MORE |
1 |
£87.40 Ex VAT @ 20% |
||
A30 | HU0755 |
Screw, set Oil seal to cylinder blockThis item has been superceded by SH504051 - see below |
8 | |||
SH504051 |
SCREW 1/4 UNC X 5/8" |
8 |
£0.42 Ex VAT @ 20% |
|||
A30A | WL0207 |
Washer, spring Oil seal to cylinder blockThis item has been superceded by WS104070643 - see below |
8 | |||
WS104070643 |
WASHER SPRING 1/4" RECT SECTION |
8 |
£0.20 Ex VAT @ 20% |
|||
A31 | 122166 |
CYLINDER LINER (Graded F, G, H)Revington TR information: Liner 86mm. Standard Sizes up to plus +60 available |
4 |
£99.71 Ex VAT @ 20% |
||
A32 | 112789 |
Gasket, liner 86 mm EngineRevington TR information: Three thicknesses of figure of 8 gasket are available; 0.015" made from steel, 0.018" made from copper, and 0.021" made from aluminium or copper. The alternative thicknesses can be used to adjust the height of the... READ MORE |
2 |
£3.79 Ex VAT @ 20% |
||
A31 | 105539 |
CYLINDER LINER (Graded F, G, H)Revington TR information: Liners 83mm Standard Sizes up to +40 available |
4 |
£104.11 Ex VAT @ 20% |
||
A32 | 112789 |
Gasket, liner 83 mm EngineRevington TR information: Three thicknesses of figure of 8 gasket are available; 0.015" made from steel, 0.018" made from copper, and 0.021" made from aluminium or copper. The alternative thicknesses can be used to adjust the height of the... READ MORE |
2 |
£3.79 Ex VAT @ 20% |
||
A33 | 304711 |
FRONT ENGINE PLATERevington TR information: the pin is 056763 |
1 | |||
A34 | 056389 |
Washer, joint Engine plate attachment to cylinder block |
1 |
£2.24 Ex VAT @ 20% |
||
A34A | HU0856 |
Screw, set Engine plate attachment to cylinder blockThis item has been superceded by SH505061 - see below |
5 | |||
SH505061 |
SCREW 5/16 UNC X 3/4 INCH |
5 |
£0.90 Ex VAT @ 20% |
|||
A34B | WL0208 |
Washer, spring Engine plate attachment to cylinder blockThis item has been superceded by WS105090853 - see below |
5 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
5 |
£0.25 Ex VAT @ 20% |
|||
A35 | 130985 |
FRONT ENGINE MOUNTINGRevington TR information: This round engine mounting was fitted to TR4. The square type part number 143057 was fitted to TR4A. The parts are however interchangeable. |
2 |
£19.15 Ex VAT @ 20% |
||
A36 | HN2009 |
Nut Mounting to engine plate and frameThis item has been superceded by NP606111 - see below |
4 | |||
NP606111 |
NUT PLAIN 3/8 UNF X 11/32" (STD) |
4 |
£0.14 Ex VAT @ 20% |
|||
A37 | WL0209 |
Washer, lock Mounting to engine plate and frameThis item has been superceded by WS106111243 - see below |
4 | |||
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
4 |
£0.37 Ex VAT @ 20% |
|||
A37A | 133471 |
Bracket, engine restrictor |
1 |
£39.76 Ex VAT @ 20% |
||
A37B | 650325 |
Buffer, assembly, engine restrictorRevington TR information: Fitted up to body number 37689CT. Not available new. Use either second hand part 650325SH or 612962, which will need cutting down to suit. |
1 | |||
A37C | 612067 |
Buffer, rubberRevington TR information: Not available new. Use 612962. |
1 | |||
A37D | HN2008 |
Nut Buffer assembly to restrictor bracketThis item has been superceded by NP605081 - see below |
1 | |||
NP605081 |
NUT PLAIN 5/16 UNF |
1 |
£0.17 Ex VAT @ 20% |
|||
A37E | WL0208 |
Washer, spring Buffer assembly to restrictor bracketThis item has been superceded by WS105090853 - see below |
1 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
1 |
£0.25 Ex VAT @ 20% |
|||
A38 | 133471 |
PlateTriumph Catalogue Remarks: This plate is shown in the manual but was never fitted to production cars, however a torque reaction plate 133471 was, in a different position to that shown |
£39.76 Ex VAT @ 20% |
|||
A39 | 115350 |
OIL SUMP ASSEMBLYRevington TR information: Consider alloy sump 301318 or second hand part 115350SH |
1 | |||
A40 | 056646 |
Washer, joint, between sump and cylinder blockThis item has been superceded by 211123 - see below |
1 | |||
211123 |
GASKET SUMP TR2-4ARevington TR information: This is a thinner paper gasket that is more suitable for this application. If you have a joint which is irregular or not flat maybe try 211123-1 which is a cork gasket. Should you require a complete... READ MORE |
1 |
£4.60 Ex VAT @ 20% |
|||
A41 | 114774 |
Plug, oil drainRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
A42 | 100749 |
Screw, set Sump to Cylinder blockThis item has been superceded by SH505061 - see below |
16 | |||
SH505061 |
SCREW 5/16 UNC X 3/4 INCH |
16 |
£0.90 Ex VAT @ 20% |
|||
A42A | HU0855 |
Screw, set Sump to front sealing block |
1 | |||
A42B | 105220 |
Screw, set Breather pipe clip and slave cylinder stay to sump and cylinder blockThis item has been superceded by BH505101 - see below |
2 | |||
BH505101 |
BOLT 5/16 UNC X 1-1/4 INCH |
2 |
£1.22 Ex VAT @ 20% |
|||
A43 | WL0208 |
Washer, lock, on set screwsThis item has been superceded by WS105090853 - see below |
19 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
19 |
£0.25 Ex VAT @ 20% |
|||
A44 | 102139 |
DipstickRevington TR information: Consider also 102139SH and 102139SHPC |
1 |
£31.63 Ex VAT @ 20% |
||
A45 | 032307 |
Washer, felt |
1 |
£1.82 Ex VAT @ 20% |
||
A45A | 502126 |
ALUMINIUM OIL SUMP KITTriumph Catalogue Remarks: For details see Accessories Section |
1 | |||
A46 | 205020 |
BREATHER PIPE ASSEMBLYRevington TR information: Not available new. Use 205020SH or RTR1356 |
1 | |||
A47 | 120211 |
Bracket Breather pipe to cylinder blockRevington TR information: No Longer Available see 120211SH |
1 | |||
A47A | WM0083 |
Washer Breather pipe to cylinder blockThis item has been superceded by WP10510250 - see below |
1 | |||
WP10510250 |
WASHER PLAIN 5/16" x 5/8" x 0.250"Revington TR information: 3/4" o/d is occassionally supplied if 5/8" o/d is not available as some english sizes are getting more difficult to obtain. |
1 |
£3.55 Ex VAT @ 20% |
|||
A48 | HU0805 |
Screw, set Breather pipe to bracketThis item has been superceded by SH605051 - see below |
1 | |||
SH605051 |
SCREW 5/16 UNF X 5/8 INCH |
1 |
£1.39 Ex VAT @ 20% |
|||
A49 | WL0208 |
Washer, lock Breather pipe to bracketThis item has been superceded by WS105090853 - see below |
1 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
1 |
£0.25 Ex VAT @ 20% |
|||
A50 | HN2008 |
Nut Breather pipe to bracketThis item has been superceded by NP605081 - see below |
1 | |||
NP605081 |
NUT PLAIN 5/16 UNF |
1 |
£0.17 Ex VAT @ 20% |
|||
A50A | 510918 |
COMBUSTION HEAD ASSEMBLY 86 mm (Complete with valves and springs)Triumph Catalogue Remarks: Fitted up to Engine No. CT21470E only |
1 | |||
A50B | 510919 |
COMBUSTION HEAD ASSEMBLY 83 mm (Complete with valves and springs)Triumph Catalogue Remarks: Fitted up to Engine No. CT21470E only |
1 | |||
A50C | 512457 |
COMBUSTION HEAD ASSEMBLY 86 mm (Complete with valves and springs)Triumph Catalogue Remarks: Fitted from Engine No. CT21471E and future |
1 | |||
A50D | 512458 |
COMBUSTION HEAD ASSEMBLY 83 mm (Complete with valves and springs)Triumph Catalogue Remarks: Fitted from Engine No. CT21471E and future |
1 | |||
A51 | 510084 |
COMBUSTION HEAD ASSEMBLY 86 mm (Less valves and springs)Triumph Catalogue Remarks: Fitted up to Engine No. CT21470E only |
1 | |||
A51A | 510545 |
COMBUSTION HEAD ASSEMBLY 83 mm (Less valves and springs)Triumph Catalogue Remarks: Fitted up to Engine No. CT21470E only |
1 | |||
A51B | 511695 |
COMBUSTION HEAD ASSEMBLY 86 mm (Less valves and springs)Triumph Catalogue Remarks: Fitted from Engine No. CT21471E and future |
1 |
£2661.10 Ex VAT @ 20% |
||
A51C | 511785 |
COMBUSTION HEAD ASSEMBLY 83 mm (Less valves and springs)Triumph Catalogue Remarks: Fitted from Engine No. CT21471E and future |
1 | |||
A51D | PS1603 |
Plug, core, top face of combustion headRevington TR information: This Core Plug is threaded. The thread is 1" UNF x 12TPI, |
1 |
£6.96 Ex VAT @ 20% |
||
A52 | 100792 |
Tube, sealingRevington TR information: These tubes, made from Aluminium, need to be pressed gently in. Use a hand press, not a fly press. Our experience is that both aluminium and steel tubes were used by Triumph in original heads. We... READ MORE |
8 | |||
A53 | 058923 |
Guide, valve InletRevington TR information: Standard steel inlet Valve Guide fitted to TR2-6 inclusive. Also used in the exhaust position on TR4 from CT27411 and all TR4A. Suitable for valves having a shaft diameter of 5/16" (7.94mm), the guide has an... READ MORE |
4 |
£1.84 Ex VAT @ 20% |
||
A54 | 108239 |
Guide, valve ExhaustTriumph Catalogue Remarks: Fitted up to Engine No. CT only |
4 |
£9.96 Ex VAT @ 20% |
||
A54A | 058923 |
Guide, valve, exhaustTriumph Catalogue Remarks: Fitted from Engine No. CT and future |
4 |
£1.84 Ex VAT @ 20% |
||
A54B | 111913 |
Insert, valve seat Inlet |
as req'd | |||
A54C | 102941 |
Insert, valve seat Exhaust |
as req'd | |||
A55 | 108242 |
Collar, exhaust valve guideRevington TR information: consider second hand original part 108242SH |
4 |
£5.98 Ex VAT @ 20% |
||
A55A | 027378 |
Plug, core, rear face of head |
1 |
£2.18 Ex VAT @ 20% |
||
A55B | 114774 |
Plug (not required when heater is fitted)Revington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
A55C | HU0953 |
Screw, set Fitted in cylinder head for rocker oil feedThis item has been superceded by SH506031 - see below |
1 | |||
SH506031 |
SCREW HEX 3/8UNC X 3/8 INCH |
1 | ||||
A55D | 500464 |
Washer, copper Fitted in cylinder head for rocker oil feedThis item has been superceded by WC10610080 - see below |
1 | |||
WC10610080 |
WASHER COPPER 3/8 X 5/8 X .080" |
1 |
£1.81 Ex VAT @ 20% |
|||
A56 | 111717 |
Stud, rocker pedestalThis item has been superceded by ST706251 - see below |
4 | |||
ST706251 |
STUD 3/8 X3-1/8" 1-1/8"UNF1/2"UNC |
4 |
£3.85 Ex VAT @ 20% |
|||
A57 | 059011 |
Stud, rocker coverThis item has been superceded by ST705301 - see below |
2 | |||
ST705301 |
STUD 5/16 X 3-3/4" 5/8UNF+1/2UNCRevington TR information: This stud is mainly used for holding the standard rocker cover on TR2-4A. If you have an aluminium rocker cover fitted then a slightly longer stud ST705341 will most likely be required. Consider also fitting kit... READ MORE |
2 |
£4.26 Ex VAT @ 20% |
|||
A57A | 058917 |
Stud, manifold attachment 1 15/16" longThis item has been superceded by ST506152 - see below |
1 | |||
ST506152 |
STUD 3/8 X 1-15/16" UNC+ UNC |
1 |
£4.68 Ex VAT @ 20% |
|||
A57B | 058688 |
Stud, manifold attachment 1 11/16" longThis item has been superceded by ST506132 - see below |
1 | |||
ST506132 |
STUD 3/8 X 1-11/16" UNC+ UNC |
1 |
£2.21 Ex VAT @ 20% |
|||
A57C | 102474 |
Stud, manifold attachment 2.06" longThis item has been superceded by ST506162 - see below |
4 | |||
ST506162 |
STUD 3/8 X 2.06" UNC+ UNC |
4 |
£2.63 Ex VAT @ 20% |
|||
A57D | 107055 |
Stud, manifold attachment 2.38" longThis item has been superceded by ST506191 - see below |
2 | |||
ST506191 |
STUD 3/8 X 2-3/8 UNC+ UNC |
2 |
£4.18 Ex VAT @ 20% |
|||
A57E | DP0512 |
Dowel, manifold attachmentThis item has been superceded by DP514 - see below |
2 | |||
DP514 |
DOWEL 5/16 DIA X 7/8" LONG |
2 |
£1.78 Ex VAT @ 20% |
|||
A58 | 205481 |
Gasket Between combustion head and cylinder block 86 mmRevington TR information: Should you require a complete head gasket set, order GEG178. . |
1 |
£38.08 Ex VAT @ 20% |
||
A58 | 202127 |
Gasket Between combustion head and cylinder block 83 mmRevington TR information: TR2 Head Gasket 83mm No longer available. Use 205481 or gasket set 505281. |
1 | |||
A59 | 208096 |
Plate, low compression - 86 mmTriumph Catalogue Remarks: For use in countries where high octane fuel is unobtainable to provide a lower compression ratio |
1 | |||
A60 | 202775 |
Gasket - 86mmTriumph Catalogue Remarks: For use in countries where high octane fuel is unobtainable to provide a lower compression ratio |
1 |
£124.44 Ex VAT @ 20% |
||
A59 | 200906 |
Plate, low compression - 83 mmTriumph Catalogue Remarks: For use in countries where high octane fuel is unobtainable to provide a lower compression ratio |
1 | |||
A60 | 202775 |
Gasket - 83mmTriumph Catalogue Remarks: For use in countries where high octane fuel is unobtainable to provide a lower compression ratio |
1 |
£124.44 Ex VAT @ 20% |
||
A61 | 110962 |
Nut Combustion head attatchmentRevington TR information: 10 required |
10 |
£2.94 Ex VAT @ 20% |
||
A61A | WP0029 |
Washer, plain Combustion head attatchmentThis item has been superceded by WP108140753 - see below |
10 | |||
WP108140753 |
WASHER PLAIN 1/2" x 7/8" X 0.075" HARDENEDRevington TR information: Hardened cylinder head stud attachment Washer ½" Internal diameter x 7/8" Outside diameter for underneath the cylinder head nut of TR2-TR4A and other engines with ½" diameter studs. |
10 |
£3.12 Ex VAT @ 20% |
|||
A61B | 121231 |
Eye, lifting, assembly frontRevington TR information: lifting Eye, front of the engine, TR2-TR4A and any other car with a 4 cylinder TR or vanguard type engine. This part has been remanufactured to the original design in stainless steel and is supplied unpainted.... READ MORE |
1 |
£60.80 Ex VAT @ 20% |
||
A61C | 121752 |
Bracket, lifting, rearRevington TR information: Engine Lifting Eye rear TR4A. Use our improved part 121752-1 which fits without the need to remove a head stud nut. Consider second hand part 121752SH. |
1 |
£17.04 Ex VAT @ 20% |
||
A62 | 107626 |
Valve InletRevington TR information: Inlet Valve standard TR2-4A. We have good stock of second hand valves too for those wanting either a cheaper or an original part. in addition we have tow valves available with larger heads. ... READ MORE |
4 |
£14.42 Ex VAT @ 20% |
||
A63 | 108806 |
Valve ExhaustTriumph Catalogue Remarks: Fitted up to Engine No. CT only |
4 |
£21.86 Ex VAT @ 20% |
||
A63A | 136567 |
Valve, exhaustTriumph Catalogue Remarks: Fitted from Engine No. CT and future |
4 |
£24.01 Ex VAT @ 20% |
||
A64 | 107492 |
Spring, valve Outer |
8 |
£5.90 Ex VAT @ 20% |
||
A65 | 107493 |
Spring, valve InnerRevington TR information: Our stock are genuine Leyland parts |
8 |
£3.66 Ex VAT @ 20% |
||
A66 | 102564 |
Spring, auxiliary, fitted on exhaust valveRevington TR information: This valve spring is suitable for TR5 and TR6PI up to engine number CP54584 when used with an outer spring 149633 on all valves. Consider spring set RTR1175 |
4 |
£5.71 Ex VAT @ 20% |
||
A67 | 105803 |
Collar, valve springRevington TR information: TR2-4 valve spring Cap. As this part does not wear out, RevingtonTR prefer to supply original second hand parts which can be guaranteed to be the correct shape and material specification. Order 105803SH below. This part... READ MORE |
8 |
£8.10 Ex VAT @ 20% |
||
A68 | 106663 |
Cone, split retaining, collar on valveRevington TR information: There are two collet halves per valve. This part number is for two halves therfore 2 pieces are supplied and priced as 1 collet = 2 halves. Note - Some suppliers sell just 1 half. |
8 prs. |
£4.03 Ex VAT @ 20% |
||
A69 | 057933 |
VALVE TAPPETRevington TR information: Revington TR recommends using an uprated cam follower in favour of the standard part. These are tuftrided and have a drain hole to allow oil to dribble onto the cam lobe. Order part number RTR1024 below.... READ MORE |
8 |
£9.83 Ex VAT @ 20% |
||
A70 | 106968 |
PUSH ROD ASSEMBLY High comp.Revington TR information: Push Rod for TR2-4A for standard high compression engines. 257mm long. Consider second hand original part 106968SH or for competition use RTR1155. Various pushrod types were used in TR2-4A engines as follows: TR2-3B High compression 106968 Eng.... READ MORE |
8 |
£23.94 Ex VAT @ 20% |
||
A70A | 108616 |
PUSH ROD ASSEMBLY Low comp.Triumph Catalogue Remarks: Push rod assembly 108616 to be used in conjunction with compression plate number 208096 or 200906 in countries where high octane fuel is unobtainable. |
8 | |||
A71 | 111064 |
ROCKER SHAFTRevington TR information: Consider tuftrided part RTR1103. |
1 |
£49.22 Ex VAT @ 20% |
||
A72 | 112545 |
Pedestal, rocker, drilledRevington TR information: Not available new singularly. Order second hand part 112545SH or new set 112545X. The non-drilled part is 112546SH. Consider also improved Aluminium rocker pedestal set 112545X which includes front and rear pedestals with end... READ MORE |
1 | |||
A73 | 042880 |
Screw, locking Pedestal to shaft |
1 | |||
A73A | 052337 |
Washer, shakeproof Pedestal to shaftThis item has been superceded by WK7607 - see below |
1 | |||
WK7607 |
LOCK WASHER CUPPED 1/4" |
1 |
£0.94 Ex VAT @ 20% |
|||
A74 | 112546 |
Pedestal, rocker, plainRevington TR information: Not available new singularly. Order second hand part 112546SH or new set 112545X. The drilled part is 112545SH. Consider also improved Aluminium rocker pedestal set 112545X which includes front and rear pedestals with end... READ MORE |
3 | |||
A75 | HN2009 |
Nut Rocker pedestal to combustion headThis item has been superceded by NP606111 - see below |
4 | |||
NP606111 |
NUT PLAIN 3/8 UNF X 11/32" (STD) |
4 |
£0.14 Ex VAT @ 20% |
|||
A76 | WL0209 |
Washer, lock pedestal to combustion headTriumph Catalogue Remarks: Fitted up to Engine No. CT6039E only with steel Rocker Pedestals. Use WP009 with aluminium Rocker Pedestals |
4 | |||
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
4 |
£0.37 Ex VAT @ 20% |
|||
A76A | WP009 |
Washer, plain, rocker pedestal to combustion headTriumph Catalogue Remarks: Fitted from Engine No. CT6040E and future with aluminium Rocker Pedestals |
4 | |||
WP106121191 |
WASHER PLAIN 3/8" x 3/4" x 0.119" HARDENED |
4 |
£1.48 Ex VAT @ 20% |
|||
A77 | 108012 |
Rocker assembly No. 1 |
4 |
£18.50 Ex VAT @ 20% |
||
A78 | 108014 |
Rocker assembly No. 2 |
4 |
£12.31 Ex VAT @ 20% |
||
A78A | 044370 |
Bush, rocker |
16 |
£3.68 Ex VAT @ 20% |
||
A79 | 109495 |
Screw, adjustment Fitted in rockersRevington TR information: All TR2-6 use a similar rocker adjusting screw and nut principle. In fact all TR2-4A and TR5, TR6CP, CF and CR use the same screw 109495 and nut 057110 (now superceded to 51K1178). TR250 and TR6CC... READ MORE |
8 |
£7.02 Ex VAT @ 20% |
||
A80 | 057110 |
Nut, lock Fitted in rockersThis item has been superceded by 51K1178 - see below |
8 | |||
51K1178 |
LOCKNUT ROCKER ADJ.Revington TR information: 5/16" UNF locknut rocker adjusting TR2-6 All TR2-6 use a similar rocker adjusting screw and nut principle. In fact all TR2-4A and TR5, TR6CP, CF and CR use the same screw 109495 and nut 057110 (now... READ MORE |
8 |
£0.65 Ex VAT @ 20% |
|||
A81 | 128074 |
Spring, rocker CentreRevington TR information: use second hand spring128074SH |
1 | |||
A82 | 128075 |
Spring, rocker IntermediateTriumph Catalogue Remarks: Fitted up to Engine No. CT only |
2 | |||
A83 | 044630 |
Spring, rocker OuterThis item has been superceded by WT11016 - see below |
2 | |||
WT11016 |
WASHER THACKERY 5/8 INCHRevington TR information: No longer available |
2 | ||||
A83A | 130481 |
Spring, rocker, intermediateTriumph Catalogue Remarks: Fitted from Engine No. CT and future |
4 | |||
A84 | 060733 |
Collar, on ends of shaft |
2 | |||
A85 | 058334 |
Pin (Mills) securing collarThis item has been superceded by 500975 - see below |
2 | |||
500975 |
MILLS PIN 1/8"x1" |
2 |
£1.63 Ex VAT @ 20% |
|||
A86 | 304677 |
ROCKER COVER ASSEMBLYTriumph Catalogue Remarks: Fitted up to Engine No. CT14233E only |
1 | |||
A87 | 113569 |
Cap, oil filler and breather assemblyTriumph Catalogue Remarks: Fitted up to Engine No. CT14233E only |
1 |
£61.80 Ex VAT @ 20% |
||
A87A | 305614 |
ROCKER COVER ASSEMBLYTriumph Catalogue Remarks: Fitted from Engine No. CT14234E and future |
1 | |||
A87B | 113569 |
Cap, oil filler and breatherTriumph Catalogue Remarks: Fitted from Engine No. CT14234E and future |
1 |
£61.80 Ex VAT @ 20% |
||
A87C | 129077 |
Plug, breather pipe adaptorTriumph Catalogue Remarks: Fitted from Engine No. CT14234E and future |
1 |
£16.91 Ex VAT @ 20% |
||
A87D | WF0511 |
Washer, fibre, breather pipe plugTriumph Catalogue Remarks: Fitted from Engine No. CT14234E and future |
1 | |||
WF10812062 |
WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK |
1 |
£0.70 Ex VAT @ 20% |
|||
A88 | 121219 |
Washer, joint, cover to combustion headTriumph Catalogue Remarks: Fitted from Engine No. CT14234E and future |
1 | |||
GEG437 |
GASKET ROCKER COVER TR2-4ARevington TR information: Our gasket is approx 6mm thick. Beware of thinner alternatives that are not as thick as the rocker cover recess. |
1 |
£7.45 Ex VAT @ 20% |
|||
A89 | YN2908 |
Nut, nyloc Rocker cover attachmentThis item has been superceded by NY605141 - see below |
2 | |||
NY605141 |
NYLOC 5/16 UNF X 7/16 THICKRevington TR information: Nyloc Nut tall version. This Nyloc nut is used in locations where extra thread depth is desirable. |
2 | ||||
A90 | WP0008 |
Washer, plain Rocker cover attachmentThis item has been superceded by WP10510075 - see below |
2 | |||
WP10510075 |
WASHER PLAIN 5/16" x 5/8" x 0.075" |
2 |
£0.44 Ex VAT @ 20% |
|||
A91 | WF0508 |
Washer, fibre Rocker cover attachmentThis item has been superceded by WF10510056 - see below |
2 | |||
WF10510056 |
WASHER FIBRE 5/16 I/D X 5/8 OD |
2 |
£0.80 Ex VAT @ 20% |