Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR4 Plate R - REAR AXLE
<< Return to Triumph Catalogue Plate List
| Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
|---|---|---|---|---|---|---|
 |
R1AA | 510922 |
REAR AXLE ASSEMBLY (3-7 to 1 Ratio) (Less Half Shafts and Brake Units)Revington TR information: Not available new. Use 510922EX |
1 | ||
|
R1BB | 510923 |
REAR AXLE ASSEMBLY (4-1 to 1 Ratio) (Less Half Shafts and Brake Units)Revington TR information: Not available new. Use 510923EX |
1 | ||
|
R1 | 304854 |
AXLE CASING ASSEMBLY |
1 | ||
|
R2 | 100878 |
Screw, set Bearing cap to casing |
4 | ||
|
R3 | WL0209 |
Washer, lock Bearing cap to casing |
4 | ||
|
R4 | 056894 |
Breather Fitted in housing |
1 | ||
|
R5 | 056895 |
Washer, fibre Fitted in housing |
1 | ||
|
R6 | 114774 |
Plug, drainRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
|
|
R6A | 113193 |
Bracket, compensator and boss sub assembly |
1 | ||
|
R6B | 125362 |
Nipple, grease, compensator bracket |
1 | ||
|
R7 | 058800 |
Seal, oil, axle tube ends |
2 | ||
|
RS | 110515 |
Bearing, between differential unit and casing |
2 |
£62.52 Ex VAT @ 20% |
|
|
R9 | 100894 |
Shim, bearing adjusting .003" |
as req'd. |
£3.11 Ex VAT @ 20% |
|
|
R9 | 100895 |
Shim, bearing adjusting .005' |
as req'd. | ||
|
R9 | 100896 |
Shim, bearing adjusting .010' |
as req'd. |
£1.63 Ex VAT @ 20% |
|
|
DIFFERENTIAL UNIT ASSEMBLY |
|||||
|
R10 | 302155 |
Casing, differentialRevington TR information: TR3-6 Girling only diff Carrier which uses thick 153385 planet gears and accommodates TR3-4A Girling half shafts and TR5-6 independent side shafts. Not available new use Second Hand part 302155SH or complete carrier with second hand... READ MORE |
1 | ||
|
R11 | 113187 |
Gear, side, differential |
2 | ||
|
R12 | 102801 |
Washer, thrust, differential side gear |
2 |
£4.22 Ex VAT @ 20% |
|
|
R13 | 113188 |
'Gear, pinion, differentialRevington TR information: All TR s from Girling TR3-TR6 use pinion gear 113188 The Differential fitted to TR2 8, Dolomite 2.5PI etc. use a common arrangement of thrust washers in conjunction with pinion gears. A complete range of thicknesses... READ MORE |
2 | ||
|
R14 | 056793 |
Washer, thrust, differential gearRevington TR information: Thrust Washer 0.048" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
2 |
£10.14 Ex VAT @ 20% |
|
|
R15 | 100844 |
Pin, cross, pinion gear |
1 |
£43.52 Ex VAT @ 20% |
|
|
R16 | 111215 |
Pin, locating, cross pin in differential casingRevington TR information: not available new, use second hand part 111215SH |
1 |
£9.07 Ex VAT @ 20% |
|
|
R17 | 109566 |
Button, thrust, on cross pinRevington TR information: Call for price and availability |
1 '. | ||
|
R18 | 502127 |
Crown wheel and pinion (3-7 to 1 ratio)Revington TR information: CWP 3.7:1 ratio TR2-4. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
1 pair |
£529.28 Ex VAT @ 20% |
|
|
R18A | 505014 |
Crown wheel and pinion (4-1 to 1 ratio)Revington TR information: CWP 4.1:1 ratio TR2-6. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
1 pair |
£403.88 Ex VAT @ 20% |
|
|
R19 | 110737 |
Bolt Crown wheel to differential casing |
10 |
£2.12 Ex VAT @ 20% |
|
|
R20 | 118977 |
Washer, lock Crown wheel to differential casing |
10 | ||
|
R21 | 100897 |
Bearing, pinion head |
1 | ||
|
R22 | 100965 |
Shim, bearing adjustment .003" |
as req'd. |
£4.08 Ex VAT @ 20% |
|
|
R22 | 100966 |
Shim, bearing adjustment .005" |
as req'd. |
£1.49 Ex VAT @ 20% |
|
|
R22 | 100967 |
Shim, bearing adjustment .010" |
as req'd. |
£1.72 Ex VAT @ 20% |
|
|
R23 | 100846 |
Spacer, between bearings |
1 |
£19.32 Ex VAT @ 20% |
|
|
R24 | 100422 |
Bearing, pinion shank |
1 |
£54.68 Ex VAT @ 20% |
|
|
R25 | 100562 |
Shim, bearing adjustment .003"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375"... READ MORE |
as req'd. |
£2.14 Ex VAT @ 20% |
|
|
R25 | 100563 |
Shim, bearing adjustment .005"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375" external diameter. 140793... READ MORE |
as req'd: |
£2.86 Ex VAT @ 20% |
|
|
R25 | 100564 |
Shim, bearing adjustment .010"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375" external diameter. 140793... READ MORE |
as req'd. |
£1.84 Ex VAT @ 20% |
|
|
R26 | 100898 |
Seal, oil, on pinionRevington TR information: Live Axle Pinion Oil Seal 2-4 and live axle TR4A The Original Triumph TR4A parts catalogue does not list the Axle Pinion Seal correctly in so far as seal 140337 is listed for both the independent... READ MORE |
1 |
£16.38 Ex VAT @ 20% |
|
|
R27 | 107947 |
Flange, pinionRevington TR information: Square Differential input flange. TR2-4. Not available new. Consider second hand part 107947SH. |
1 | ||
|
R28 | 112635 |
Nut, slotted, flange to pinionRevington TR information: This slotterd nut is used to secure TR2-4 and 4A-5 diferential pinnions. When a nyloc nut is required use NY610163 |
1 |
£11.96 Ex VAT @ 20% |
|
|
R29 | 115990 |
Washer, under nut |
1 | ||
|
R30 | PCO045 |
Pin, cotter, locking nut |
1 | ||
 |
R31 | 203660 |
REAR COVER ASSEMBLYRevington TR information: This rear axle cover was fitted to Girling TR2-4 and live axle TR4A s and used small plug 114774. Not available new We also keep second hand part 203660SH as well as an aluminium finned part... READ MORE |
1 |
£77.35 Ex VAT @ 20% |
|
|
R32 | 101359 |
Washer, joint, between cover and casing |
1 |
£3.48 Ex VAT @ 20% |
|
|
R33 | 114774 |
Plug, oil fillerRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
|
|
R34 | HU0805 |
Screw, set, cover to casing |
8 | ||
|
R35 | WL0208 |
Washer, lock |
8 | ||
|
R36 | 207613 |
REAR AXLE SHAFTRevington TR information: Consider using Second Hand part 207613SH. . |
2 |
£271.40 Ex VAT @ 20% |
|
|
R37 | 110237 |
Bearing, rear hub |
2 | ||
|
R38 | 058801 |
Seal, oil |
2 | ||
|
R39 | 058773 |
Housing, bearingRevington TR information: Fitted to TR3 from TS13046 'Girling' axle, all TR4 and live axle TR4A. Not available new. Use second hand part 058773SH |
2 | ||
|
R40 | 036583 |
Shim, bearing housing adjustment .006' |
as req'd. |
£3.34 Ex VAT @ 20% |
|
|
R40 | 038264 |
Shim, bearing housing adjustment .008" |
as req'd. |
£3.22 Ex VAT @ 20% |
|
|
R40 | 036582 |
Shim, bearing housing adjustment 1/64" |
as req'd. |
£4.25 Ex VAT @ 20% |
|
|
R40 | 036581 |
Shim, bearing housing adjustment 1/32" |
as req'd. |
£6.22 Ex VAT @ 20% |
|
|
R41 | 112653 |
Bolt Bearing housing and brake back plate to casing |
12 |
£3.06 Ex VAT @ 20% |
|
|
R42 | 036567 |
Washer, tab Bearing housing and brake back plate to casing |
6 |
£3.46 Ex VAT @ 20% |
|
|
R43 | 113175 |
Hub, assembly, disc wheelsRevington TR information: consider uprated part RTR1348 |
2 |
£210.50 Ex VAT @ 20% |
|
|
R44 | 100869 |
Stud, wheel hubRevington TR information: This wheel stud which screws into the hub is used at the front of TR2-3 Drum brake cars fitted with steel wheels and at the rear of all TR2-4 (and TR4A fitted with a rigid axle)... READ MORE |
8 |
£10.12 Ex VAT @ 20% |
|
|
R45 | 113173 |
Hub assembly (Wire wheels) |
2 | ||
|
R46 | 110365 |
Stud, rear hubRevington TR information: This wheel stud which screws into the hub is used at the rear of all TR3 (with Girling axle)-4 (and TR4A fitted with a rigid axle) fitted with wire wheels. It is not uncommon for these... READ MORE |
8 |
£13.90 Ex VAT @ 20% |
|
|
R47 | 202446 |
Extension, hub R.H. |
|||
|
R47A | 202447 |
Extension, hub L.H. |
|||
|
R48 | 110366 |
Nut, extension to hubRevington TR information: Nut, wire wheels only TR2-TR6 attaching the adapter to the hub. Consider original second hand part number 110366SH. Steel wheel TR2-6 early (when covered by a wheel trim) use a larger nut 109586. Later TR6 with... READ MORE |
8 |
£2.66 Ex VAT @ 20% |
|
|
R49 | 110621 |
Key Hub to axle shaft |
2 | ||
|
R50 | 058784 |
Nut, slotted Hub to axle shaft |
2 | ||
|
R51 | WPOO26 |
Washer, plain Hub to axle shaft |
2 | ||
|
R52 | PC0013 |
Pin, cotter Hub to axle shaft |
2 |
