Home » Engine, Transmission, wheels/Tyres and Heating/Cooling » FLYWHEELS, CLUTCHES AND RELEASE MECHANISMS » FLYWHEELS » FITTINGS AND RING GEARS

Engine, Transmission, wheels/Tyres and Heating/Cooling

FITTINGS AND RING GEARS

When attaching an aluminium flywheel to the crankshaft, it is important that washers or tab washers are used on 4 cylinder cars. The plate listed below should be used for 6 cylinder applications.

There are no parts listed for your currently selected car type. To view other parts within this section, change the car type above to "All Cars" or a different car type, then click "Change Car Type".

20 plates in total

83 m.m. and 86 m.m. ENGINE: BLOCK AND HEAD

PLATE A - 83 m.m. and 86 m.m. ENGINE: BLOCK AND HEAD

83 m.m. and 86 m.m. ENGINE: CRANK, PISTONS CONNECTING RODS AND CAM.

PLATE B - 83 m.m. and 86 m.m. ENGINE: CRANK, PISTONS CONNECTING RODS AND CAM.

83 m.m. and 86 m.m. ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS.

PLATE E - 83 m.m. and 86 m.m. ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS.

83 m.m. and 86 m.m. ENGINE: BREATHER DETAILS.

PLATE F - 83 m.m. and 86 m.m. ENGINE: BREATHER DETAILS.

83 m.m. and 86 m.m. ENGINE: OIL FILTER ASSEMBLY. TECALEMIT TYPE.

PLATE H - 83 m.m. and 86 m.m. ENGINE: OIL FILTER ASSEMBLY. TECALEMIT TYPE.

83 m.m. and 86 m.m. ENGINE: OIL FILTER ASSEMBLY. PUROLATOR TYPE.

PLATE J - 83 m.m. and 86 m.m. ENGINE: OIL FILTER ASSEMBLY. PUROLATOR TYPE.

83 m.m. and 86 m.m. ENGINE: WATER PUMP ASSEMBLY.

PLATE C - 83 m.m. and 86 m.m. ENGINE: WATER PUMP ASSEMBLY.

83 m.m. and 86 m.m. ENGINE: WATER THERMOSTAT HOUSING AND HOSES.

PLATE D - 83 m.m. and 86 m.m. ENGINE: WATER THERMOSTAT HOUSING AND HOSES.

83 m.m. and 86 m.m. ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated).

PLATE M - 83 m.m. and 86 m.m. ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated).

CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER.

PLATE N - CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER.

GEARBOX: CASING, TOP COVER AND MOUNTING. Gear lever grommet item P75A

PLATE P - GEARBOX: CASING, TOP COVER AND MOUNTING. Gear lever grommet item P75A

GEARBOX: MAINSHAFT, CONSTANT PINION SHAFT, COUNTERSHAFT AND REVERSE GEAR.

PLATE Q - GEARBOX: MAINSHAFT, CONSTANT PINION SHAFT, COUNTERSHAFT AND REVERSE GEAR.

OVERDRIVE: OVERDRIVE KIT.

PLATE BH - OVERDRIVE: OVERDRIVE KIT.

OVERDRIVE: OVERDRIVE UNIT DETAILS (Rigid axles only).

PLATE BJ - OVERDRIVE: OVERDRIVE UNIT DETAILS (Rigid axles only).

OVERDRIVE: OVERDRIVE UNIT DETAILS (independent rear axles only).

PLATE BK - OVERDRIVE: OVERDRIVE UNIT DETAILS (independent rear axles only).

PROPELLOR SHAFT AND ROAD WHEELS.

PLATE X - PROPELLOR SHAFT AND ROAD WHEELS.

RIGID REAR AXLE.

PLATE U - RIGID REAR AXLE.

INDEPENDENT REAR AXLE: DIFFERENTIAL UNIT, REAR AXLE SHAFTS AND HUB UNITS.

PLATE T - INDEPENDENT REAR AXLE: DIFFERENTIAL UNIT, REAR AXLE SHAFTS AND HUB UNITS.

RADIATOR AND OVERFLOW BOTTLE. TOOLS AND SERVICE KITS (Not illustrated).

PLATE AG - RADIATOR AND OVERFLOW BOTTLE. TOOLS AND SERVICE KITS (Not illustrated).

HEATER KIT.

PLATE AY - HEATER KIT.