Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
TRIUMPH PLATES - Browse Original Triumph Catalogue Plates
WHEEL NUTS, STUDS AND SPACERS
| Part No. | Description and Comments | Price | Add to Cart | |
|---|---|---|---|---|
 |
RTR1338N
|
WHEEL NUT FOR MINILITE WHEEL etc. 7/16UNFRevington TR information: Road wheel attachment nut with 7/16" UNF thread (standard TR2-6 wheel studs). Suits many wheels including Minilite, Compomotive and any other wheel requiring a conical seal. Sold singularly. Be sure these wheel attachment nuts... READ MORE |
£4.63 Ex VAT @ 20% |
|
 |
RTR1338LKN
|
NUT LOCKING ALLOYS KIT 4Revington TR information: Set of 4 locking wheel nuts 7/16" UNF. Use this set , one for eacj wheel to secure your TR2-6 standard steel wheels and many Alloy wheels (Minilite, Compomotive etc.). This nut is used to substitute... READ MORE |
||
|
RTR1346
|
NUT WHEEL SLEEVE TYPE 2B 5/8"Revington TR information: Wheel nut suitable for 7/16"UNF wheel studs intended for attaching aluminium wheels with a flat face (not conical) where the nut attaches, requiring a sleeve nut with a 5/8" (16mm) plain section 3/4" long where the... READ MORE |
£8.77 Ex VAT @ 20% |
|
|
RTR1346SLEEVE
|
SLEEVE TO CONVERT 5/8" NUT TO 11/16"Revington TR information: 'Top hat' shaped adaptor sleeve for wheels that need an 11/16" (17.5mm). This Sleeve converts an RTR1346 sleeve nut from 5/8" (16mm) to 11/16" (17.5mm). Wheel nut RTR1346 is suitable for 7/16"UNF wheel studs intended for... READ MORE |
£3.90 Ex VAT @ 20% |
|
 |
RTR1259
|
NUT WHEEL AMERICAN RACING Stainless SteelRevington TR information: Wheel nut manufactured from stainless steel for American racing inc. wheels and other wheels requiring a sleeve nut. These nuts are of the sleeve type where the sleeve is 17.5mm diameter, 15.5mm long and the thread... READ MORE |
£23.27 Ex VAT @ 20% |
|
|
RTR1385
|
STUD WHEEL REPAIR TR2-4Revington TR information: TR2-4 (and TR4A Live Axle) Repair screw-in type Wheel Stud.TR2-4(and TR4A Live Axle) Wheel stud rear axle, with oversize thread into the hub. This stud enables torn out threads to be repaired. It is not... READ MORE |
£19.32 Ex VAT @ 20% |
|
|
RTR1385+10
|
STUD WHEEL REPAIR+10mm TR2-4Revington TR information: TR2-4 (and TR4A Live Axle) Repair screw in type Wheel Stud 10mm longer than standard. It is not uncommon for this type of stud to pull out of the hub, if this happens Revington TR are... READ MORE |
£19.58 Ex VAT @ 20% |
|
|
RTR1379
|
TAP M12 X 1.25 2NDRevington TR information: Special tap used with stud RTR1385 and RTR1385+10. |
£52.22 Ex VAT @ 20% |
|
 |
217602S |
SPACER W/W TO ST/WHEEL TR2-6 eachRevington TR information: TR3G-6 Accurately machined spacer approximately 6mm thick. This spacer fits behind a wire wheel adapter and enables the adapter and 4 adapter nuts to be flitted without shortening wheel studs. The spacer was designed by... READ MORE |
£39.42 Ex VAT @ 20% |
|
|
217602SSH |
Second Hand SPACER W/W TO ST/WHEEL TR2-6 |
£24.22 Ex VAT @ 20% |
