Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR4A Plate Q - GEARBOX: MAINSHAFT, CONSTANT PINION SHAFT, COUNTERSHAFT AND REVERSE GEAR.
<< Return to Triumph Catalogue Plate ListPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
![]() |
Q1 | 208051 |
MAINSHAFTRevington TR information: Gearbox Mainshaft. No Longer Available, use 208051SH |
1 | ||
![]() |
Q2 | 116496 |
Washer, between 1st gear and bearing |
1 |
£43.81 Ex VAT @ 20% |
|
![]() |
Q3 | 058391 |
Bearing, mainshaft centreRevington TR information: Should you require a bearing of outstandingly high quality for competition purposes, we can have bearings specially made by NKE in Austria. Please enquire for current price. We have done considerable research on these bearings as... READ MORE |
1 |
£19.78 Ex VAT @ 20% |
|
![]() |
Q4 | 058955 |
Circlip, locating bearing in casing |
1 |
£5.52 Ex VAT @ 20% |
|
![]() |
Q5 | 058956 |
Circlip, retaining bearing on shaft |
1 |
£1.38 Ex VAT @ 20% |
|
![]() |
Q6 | 059443 |
Washer, between circiip and bearingRevington TR information: This washer sits between the rear bearing and the retaining circlip in TR2-3B gearbox. Not available new. Use second hand part 059443SH Parts 058949 and 059443 are very similar however 058949 won't fit on the... READ MORE |
1 | ||
![]() |
Q7 | 058949 |
Washer Mainshaft rearRevington TR information: Washer mainshaft TR2-3B gearbox. Not available new. Use second hand part 058949SH Parts 058949 and 059443 are very similar however 058949 won't fit on the mainshaft adjacent to the rear main bearing. Technical information: - ... READ MORE |
1 | ||
![]() |
Q8 | SP756 |
Bearing Mainshaft rearRevington TR information: This bearing is used at the tail of the TR2-6 non-overdrive gearbox. The TR2-3A parts book identifies this bearing as SP.75G, whist the TR4 and 4A books use SP756, TR250, TR5 and early TR6 books use... READ MORE |
1 | ||
![]() |
Q9 | 058948 |
Flange, mainshaftRevington TR information: Square Gearbox/Overdrive output flange. TR2-6 all non-overdrive gearboxes and all 'A' type overdrive gearboxes up to Gearbox number CD15651 with O/D number 22/61953. Not available new. Consider second hand part 058948SH or the interchangeable later TR6... READ MORE |
1 | ||
![]() |
Q10 | 057868 |
Nut, slotted Flange to mainshaftRevington TR information: see also 057868SH |
1 |
£6.78 Ex VAT @ 20% |
|
![]() |
Q11 | WP0024 |
Washer, plain Flange to mainshaft |
1 |
£1.03 Ex VAT @ 20% |
|
![]() |
Q12 | P00012 |
Pin, split Flange to mainshaft |
1 | ||
![]() |
Q13 | 128100 |
Gear, 1st speed |
1 |
£61.21 Ex VAT @ 20% |
|
![]() |
Q14 | 129940 |
Bush, 1st speed |
1 |
£49.69 Ex VAT @ 20% |
|
![]() |
Q14A | 129941 |
Washer, fitted between 1st gear and mainshaft 0.118"Revington TR information: TR4-Early TR6 second speed thrust washer 0.118” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are... READ MORE |
as req'd. |
£11.50 Ex VAT @ 20% |
|
![]() |
Q15 | 129942 |
Washer, fitted between 1st gear and mainshaft 0.121"Revington TR information: TR4-Early TR6 second speed thrust washer 0.121” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows:... READ MORE |
as req'd. |
£12.07 Ex VAT @ 20% |
|
![]() |
Q15A | 129943 |
Washer, fitted between 1st gear and mainshaft 0.124"Revington TR information: TR4-Early TR6 second speed thrust washer 0.124” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE |
as req'd. |
£14.26 Ex VAT @ 20% |
|
![]() |
Q15B | 129944 |
Washer, fitted between 1st gear and mainshaft 0.127"Revington TR information: TR4-Early TR6 second speed thrust washer 0.127” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE |
as req'd. |
£14.36 Ex VAT @ 20% |
|
![]() |
Q15C | 134670 |
Revington TR information: TR4-Early TR6 second speed thrust washer 0.132” thick. This washer is made from EN36 steel to a higher than normal standard for longer life. Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear... READ MORE |
as req'd. |
£11.96 Ex VAT @ 20% |
|
![]() |
Q16 | 128102 |
Hub, synchro, 1st and 2nd |
1 |
£0.71 Ex VAT @ 20% |
|
![]() |
Q17 | 122075 |
Spring Fitted in 1st and 2nd synchro hubRevington TR information: This number is ok for the synchro hub but use 106388 below for the gear lever. |
3 |
£2.33 Ex VAT @ 20% |
|
![]() |
Q18 | BL0016 |
Ball Fitted in 1st and 2nd synchro hub |
3 | ||
![]() |
Q19 | 113431 |
Cup, synchro,lst and 2nd gearRevington TR information: From our experiance we have found our supplier to supply the best shaped rings with the correct profile ramps and round inside. Slightly more expensive but we think they are the best. We also have stock... READ MORE |
2 |
£43.60 Ex VAT @ 20% |
|
![]() |
Q20 | 128103 |
Gear, reverse and operating sleeve |
1 | ||
![]() |
Q21 | 105629 |
Gear, 2nd speedRevington TR information: 2nd Gear with 33 teeth used on all cars TR2-6 up to approximately 1972. The length of the bore (1.565” diameter) of the gear is approximately 1.160” This gear has 3 oil holes from the bore... READ MORE |
1 |
£169.06 Ex VAT @ 20% |
|
![]() |
Q22 | 129939 |
Bush, 2nd speed gear |
1 | ||
![]() |
Q22A | 129941 |
Washer, fitted between 2nd gear and mainshaft 0.118'Revington TR information: TR4-Early TR6 second speed thrust washer 0.118” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are... READ MORE |
as req'd. |
£11.50 Ex VAT @ 20% |
|
![]() |
Q23 | 129942 |
Washer, fitted between 2nd gear and mainshaft 0.121"Revington TR information: TR4-Early TR6 second speed thrust washer 0.121” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows:... READ MORE |
as req'd. |
£12.07 Ex VAT @ 20% |
|
![]() |
Q23A | 129943 |
Washer, fitted between 2nd gear and mainshaft 0.124"Revington TR information: TR4-Early TR6 second speed thrust washer 0.124” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE |
as req'd. |
£14.26 Ex VAT @ 20% |
|
![]() |
Q23B | 129944 |
Washer, fitted between 2nd gear and mainshaft 0.127'Revington TR information: TR4-Early TR6 second speed thrust washer 0.127” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE |
as req'd. |
£14.36 Ex VAT @ 20% |
|
![]() |
Q24 | 105630 |
Gear, 3rd speed |
1 |
£160.54 Ex VAT @ 20% |
|
![]() |
Q25 | 129940 |
Bush, 3rd speed gear |
1 |
£49.69 Ex VAT @ 20% |
|
![]() |
Q26 | 132220 |
Washer Retaining 3rd speed gear on mainshaft |
1 | ||
![]() |
Q27 | 055707 |
Circlip Retaining 3rd speed gear on mainshaft |
1 |
£5.52 Ex VAT @ 20% |
|
![]() |
Q28 | 062064 |
Sleevesynchro, 3rd and topRevington TR information: Not available new, use 062064SH. |
1 | ||
![]() |
Q29 | 122075 |
Spring Fitted in 3rd and top synchro sleeveRevington TR information: This number is ok for the synchro hub but use 106388 below for the gear lever. |
3 |
£2.33 Ex VAT @ 20% |
|
![]() |
Q30 | BL0016 |
Ball Fitted in 3rd and top synchro sleeve |
3 | ||
![]() |
Q31 | 113431 |
Cup, synchro, 3rd and topRevington TR information: From our experiance we have found our supplier to supply the best shaped rings with the correct profile ramps and round inside. Slightly more expensive but we think they are the best. We also have stock... READ MORE |
2 |
£43.60 Ex VAT @ 20% |
|
![]() |
Q32 | 113430 |
Sleeve, operating, 3rd and top |
1 | ||
![]() |
Q33 | 204215 |
CONSTANT PINION SHAFTRevington TR information: Not avaialble new. Use 204214 or Consider 204215SH |
1 | ||
![]() |
Q34 | 128933 |
Bearing, needle roller, pinion shaftTriumph Catalogue Remarks: Alternative to 117836 |
1 | ||
![]() |
Q34 | 117836 |
Bearing, needle roller, pinion shaftTriumph Catalogue Remarks: Alternative to 128933 |
1 | ||
![]() |
Q35 | 060658 |
Thrower, oil, constant pinion |
1 |
£2.27 Ex VAT @ 20% |
|
![]() |
Q36 | 058391 |
Bearing, ballRevington TR information: Should you require a bearing of outstandingly high quality for competition purposes, we can have bearings specially made by NKE in Austria. Please enquire for current price. We have done considerable research on these bearings as... READ MORE |
1 |
£19.78 Ex VAT @ 20% |
|
![]() |
Q37 | 058955 |
Circlip, locating, bearing in casing |
1 |
£5.52 Ex VAT @ 20% |
|
![]() |
Q38 | 058956 |
Circlip, retaining, bearing on shaft |
1 |
£1.38 Ex VAT @ 20% |
|
![]() |
Q39 | 060078 |
Washer, bearing |
1 |
£1.10 Ex VAT @ 20% |
|
![]() |
Q40 | 128105 |
COUNTERSHAFT |
1 |
£43.80 Ex VAT @ 20% |
|
![]() |
Q41 | 128107 |
Gear, countershaft 1st and reverseRevington TR information: First and reverse gear countershaft. consider using our uprated version 128107UREX or 128107URNEW. 128107UR comes with bearings First gear has 16 teeth and is 53.4mm diameter. Fitted up to CC89816 Later cars used UKC662 post CC89817 which... READ MORE |
1 | ||
![]() |
Q42 | 128108 |
Gear, countershaft 2nd speed |
1 | ||
![]() |
Q43 | 105659 |
Gear, countershaft 3rd speed |
1 | ||
![]() |
Q44 | 059456 |
Piece, distance, between 3rd and constant gears |
1 |
£24.25 Ex VAT @ 20% |
|
![]() |
Q45 | 105626 |
Gear, constantRevington TR information: Not available new. Use 105626SH or 105626SR |
1 | ||
![]() |
Q46 | 126862 |
Bearing, needleTriumph Catalogue Remarks: Fitted up to Gearbox No |
1 |
£16.82 Ex VAT @ 20% |
|
![]() |
Q46A | 145301 |
Bearing, needleTriumph Catalogue Remarks: Fitted from Gearbox No and future |
1 | ||
![]() |
Q47 | 129955 |
Washer, thrust Front of countershaft |
1 |
£11.59 Ex VAT @ 20% |
|
![]() |
Q48 | 129956 |
Washer, thrust Rear of countershaft |
1 |
£17.39 Ex VAT @ 20% |
|
![]() |
Q49 | 129937 |
REVERSE SPINDLE |
1 |
£38.39 Ex VAT @ 20% |
|
![]() |
Q50 | 128110 |
Wheel, reverse, assembly |
1 |
£151.31 Ex VAT @ 20% |
|
![]() |
Q51 | 129862 |
Bush, reverse wheel |
1 |
£11.74 Ex VAT @ 20% |
|
![]() |
Q52 | 129954 |
Screw, wedglok C/shah and reverse shaft |
1 |
£2.87 Ex VAT @ 20% |
|
![]() |
Q53 | 129938 |
Plate, locking to gear box rear of C/shaft |
1 |
£8.47 Ex VAT @ 20% |
|
![]() |
Q54 | 124894 |
REVERSE OPERATING LEVER ASSEMBLY |
1 | ||
![]() |
Q55 | 106448 |
Pin, fulcrum, fitted in gear box |
1 | ||
![]() |
Q56 | TN3209 |
Nut, nyloc Fulcrum pin |
1 | ||
![]() |
Q57 | WP0036 |
Washer, plain to gear box |
1 |