Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR4A Plate T - INDEPENDENT REAR AXLE: DIFFERENTIAL UNIT, REAR AXLE SHAFTS AND HUB UNITS.
<< Return to Triumph Catalogue Plate ListPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
T1AA | 514608 |
REAR AXLE CENTRE ASSEMBLY-3.7 to 1 ratioRevington TR information: New differential centre ssections are not available new. We do however have second hand parts available from time to time and offer this part on an exchange basis under the originnal service exhange number 514752. See... READ MORE |
1 | |||
T1BB | 514752 |
REAR AXLE CENTRE ASSEMBLY-(3.7 to 1 ratio) Reconditioned UnitRevington TR information: TR4A 3.7:1 IRS axle Reconditioned using second hand crown wheel and pinion. |
1 |
£1169.23 Ex VAT @ 20% |
||
T1CC | 514609 |
REAR AXLE CENTRE ASSEMBLY-4.1 to 1 ratio |
1 | |||
T1DD | 514753 |
REAR AXLE CENTRE ASSEMBLY-(4.1 to 1 ratio) Reconditioned UnitRevington TR information: TR4A 4.1:1 IRS axle |
1 | |||
T1 | 141360 |
Cover assembly-rearRevington TR information: not available new. Use 141360SH |
1 | |||
T2 | 143472 |
Stud, mounting bracket |
4 | |||
T3 | 013599 |
Plug, core, breather hole |
1 | |||
T4 | 510408 |
Pin, cotter, breather |
1 | |||
15 | 212047 |
Bracket, axle mounting, rearRevington TR information: Not available new, use second hand part 212047SH. |
1 | |||
T6 | YN2909 |
Nut, mounting bracket to rear cover |
4 | |||
T7 | 211793 |
Plate, axle mounting, frontRevington TR information: Consider second hand part 211793SH or reinforced second hand part 211793EX. |
1 |
£327.08 Ex VAT @ 20% |
||
T8 | 132856 |
Bolt Mounting plate to hypoid housing |
4 |
£10.80 Ex VAT @ 20% |
||
T9 | WN0710 |
Washer, shakeproof Mounting plate to hypoid housing |
4 | |||
T10 | 305815 |
Housing assembly, hypoid |
1 | |||
T11 | 140419 |
Dowel, locating rear covers |
2 |
£0.64 Ex VAT @ 20% |
||
Not serviced |
Cap, Bearing |
|||||
T12 | 100878 |
Screw, set Bearing caps to hypoid housing |
4 | |||
T13 | WL0209 |
Washer, lock Bearing caps to hypoid housing |
4 | |||
T14 | 114774 |
Plug, oil levelRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
T15 | 302155 |
Case, differentialRevington TR information: TR3-6 Girling only diff Carrier which uses thick 153385 planet gears and accommodates TR3-4A Girling half shafts and TR5-6 independent side shafts. Not available new use Second Hand part 302155SH or complete carrier with second hand... READ MORE |
1 | |||
T16 | 110515 |
Bearing, differential casing to hypoid housing |
2 |
£62.52 Ex VAT @ 20% |
||
T16A | 100894 |
Shim, adjusting differential bearing .003 |
£3.11 Ex VAT @ 20% |
|||
T17 | 100895 |
Shim, adjusting differential bearing .005 |
as req'd. | |||
T17A | 100896 |
Shim, adjusting differential bearing .010 |
£1.63 Ex VAT @ 20% |
|||
T18 | 502127 |
Crown wheel and assembly 3.7 to 1 ratioRevington TR information: CWP 3.7:1 ratio TR2-4. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
1pr |
£529.28 Ex VAT @ 20% |
||
T18A | 505014 |
Crown wheel and assembly 4.1 to 1 ratioRevington TR information: CWP 4.1:1 ratio TR2-6. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
£403.88 Ex VAT @ 20% |
|||
T19 | 110737 |
Bolt Crown wheel to differential case. |
10 |
£2.12 Ex VAT @ 20% |
||
T20 | 118977 |
Washer, lock Crown wheel to differential case. |
10 | |||
T21 | 113187 |
Gear, side, differential-16 teeth |
2 | |||
T22 | 102801 |
Washer, thrust, differential side gear |
2 |
£4.22 Ex VAT @ 20% |
||
T23 | 113188 |
Pinion, differential-10 teethRevington TR information: All TR s from Girling TR3-TR6 use pinion gear 113188 The Differential fitted to TR2 8, Dolomite 2.5PI etc. use a common arrangement of thrust washers in conjunction with pinion gears. A complete range of thicknesses... READ MORE |
2 | |||
T23A | 056793 |
Washer, thrust, differential pinion .0465Revington TR information: Thrust Washer 0.048" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£10.14 Ex VAT @ 20% |
|||
T23B | 139951 |
Washer, thrust, differential pinion .057Revington TR information: Thrust washer 0.052" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£9.07 Ex VAT @ 20% |
|||
T23C | 139952 |
Washer, thrust, differential pinion .061Revington TR information: Thrust Washer 0.056" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£8.70 Ex VAT @ 20% |
|||
T24A | 139954 |
Washer, thrust, differential pinion .069Revington TR information: Thrust Washer 0.064" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£15.88 Ex VAT @ 20% |
|||
T24B | 139955 |
Washer, thrust, differential pinion .073Revington TR information: Thrust Washer 0.068" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£7.60 Ex VAT @ 20% |
|||
T24C | 139956 |
Washer, thrust, differential pinion .077Revington TR information: Thrust Washer 0.072" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£7.60 Ex VAT @ 20% |
|||
T25 | 100844 |
Pin, cross, differential |
1 |
£43.52 Ex VAT @ 20% |
||
T26 | 111215 |
Pin, locating cross pin in differential casingRevington TR information: not available new, use second hand part 111215SH |
1 |
£9.07 Ex VAT @ 20% |
||
T27 | 100897 |
Bearing, roller, pinion head |
1 | |||
T27A | 100965 |
Shim, adjusting pinion head bearing .003 |
£4.08 Ex VAT @ 20% |
|||
T28 | 100966 |
Shim, adjusting pinion head bearing .005 |
as req'd. |
£1.49 Ex VAT @ 20% |
||
T28A | 100967 |
Shim, adjusting pinion head bearing .010 |
£1.72 Ex VAT @ 20% |
|||
T29 | 100846 |
Spacer, between bearings |
1 |
£19.32 Ex VAT @ 20% |
||
T30 | 100422 |
Bearing, roller, pinion shank |
1 |
£54.68 Ex VAT @ 20% |
||
T31 | 100562 |
Shim, adjusting pinion shank bearing .003Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375"... READ MORE |
£2.14 Ex VAT @ 20% |
|||
T31A | 100563 |
Shim, adjusting pinion shank bearing .005"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375" external diameter. 140793... READ MORE |
as reqd. |
£2.86 Ex VAT @ 20% |
||
T31B | 100564 |
Shim, adjusting pinion shank bearing .010"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375" external diameter. 140793... READ MORE |
£1.84 Ex VAT @ 20% |
|||
T32 | 140337 |
Seal, oil, pinionRevington TR information: TR4A-6. Independent axle nose seal. Not shown in late TR6 parts book. The Original Triumph TR4A parts catalogue does not list the Axle Pinion Seal correctly in so far as seal 140337 is listed for both... READ MORE |
1 |
£12.88 Ex VAT @ 20% |
||
T33 | 138105 |
Flange, pinionRevington TR information: Round Differential input flange, TR4A (both Live axle and IRS) to TR6 CP52867/CC61570. Consider original second hand part 138105SH. |
1 |
£84.07 Ex VAT @ 20% |
||
T34 | 013599 |
Washer Flange to pinion |
1 | |||
T35 | 112635 |
Nut, slotted Flange to pinionRevington TR information: This slotterd nut is used to secure TR2-4 and 4A-5 diferential pinnions. When a nyloc nut is required use NY610163 |
1 |
£11.96 Ex VAT @ 20% |
||
T36 | RTR5285-2 |
Wire, soft iron, 14G x 4Triumph Catalogue Remarks: or split pin PC0045 |
as reqd. |
£37.79 Ex VAT @ 20% |
||
T37 | 134480 |
Washer, Joint Hypoid housing to cover |
1 |
£2.23 Ex VAT @ 20% |
||
T38 | HU0808 |
Screw, set Hypoid housing to cover |
8 | |||
T39 | WL0208 |
Washer, lock Hypoid housing to cover |
8 | |||
T40 | 134235 |
Rubber, mounting, upper and lower rearRevington TR information: These bushes are very soft and can allow too much axle movement. We recommend using the following Superpro polyurethane bush kits: - SPF0138AVK TR4A IRS: Road use. SPF0138AK TR4A IRS: Fast Road and Rally use. SPF0138A-90K... READ MORE |
4 |
£4.75 Ex VAT @ 20% |
||
T41 | 134235 |
Rubber, mounting, upper frontRevington TR information: These bushes are very soft and can allow too much axle movement. We recommend using the following Superpro polyurethane bush kits: - SPF0138AVK TR4A IRS: Road use. SPF0138AK TR4A IRS: Fast Road and Rally use. SPF0138A-90K... READ MORE |
2 |
£4.75 Ex VAT @ 20% |
||
T42 | 134236 |
Rubber, mounting, lower frontRevington TR information: These bushes are very soft and can allow too much axle movement. We recommend using the following Superpro polyurethane bush kits: - SPF0138AVK TR4A IRS: Road use. SPF0138AK TR4A IRS: Fast Road and Rally use. SPF0138A-90K... READ MORE |
2 |
£3.48 Ex VAT @ 20% |
||
T43 | 134234 |
Washer, special Mounting bracket and plate to chassis frame |
4 |
£6.26 Ex VAT @ 20% |
||
T44 | TN3209 |
Nut, nyloc Mounting bracket and plate to chassis frame |
4 | |||
T45 | 134441 |
INNER AXLE SHAFT R.H. |
1 | |||
T46 | 134440 |
INNER AXLE SHAFT L.H. |
1 | |||
T47 | 134465 |
Bearing, ball, axle shaft |
2 |
£26.95 Ex VAT @ 20% |
||
T48 | 128638 |
Housing, bearing retaining |
2 |
£26.92 Ex VAT @ 20% |
||
T49 | HU0806 |
Screw, set Bearing housing to hypoid housing |
8 | |||
T50 | WL0208 |
Washer, lock Bearing housing to hypoid housing |
8 | |||
T51 | 138523 |
Seal, oil, fitted in bearing housing |
2 |
£6.49 Ex VAT @ 20% |
||
T52 | 138726 |
Flange, driving, assembly, innerRevington TR information: Drive Flange differential TR4A. This drive flange is not available new, we can however supply second hand parts where needed. Be aware that this part is not the same as the later flange 149409 as the... READ MORE |
2 | |||
T53 | 136842 |
Key Inner driving flange to inner axle shaft |
2 |
£4.38 Ex VAT @ 20% |
||
T54 | 139043 |
Washer, plain Inner driving flange to inner axle shaft |
2 | |||
T55 | 138563 |
Nut, nyloc Inner driving flange to inner axle shaft |
2 |
£21.46 Ex VAT @ 20% |
||
T55A | 402347 |
REAR OUTER AXLE SHAFT AND HUB ASSEMBLY (Comprising items T56 to T83 inclusive) |
2 |
£617.93 Ex VAT @ 20% |
||
T55B | 212293 |
OUTER AXLE SHAFT ASSEMBLYRevington TR information: Triumph sold the TR4A drive shafts as a complete assembly including all parts from the hub to the flange connected to the differential unit. Today we sell the drive shafts separately from the hub. See Drive... READ MORE |
2 | |||
T56 | 211137 |
Flange, yokeRevington TR information: TR4A-6 drive flange for standard drive shafts. |
2 |
£110.80 Ex VAT @ 20% |
||
T57 | Not serviced |
Joint, slip, assembly |
||||
T58 | 134778 |
Joint, universal |
4 | |||
T59 | Not serviced |
Shaft, sliding half |
||||
T59A | 140750 |
End cups Fitted to outer axle shaft yoke assembly |
2 | |||
T59B | 140751 |
Washer, steel Fitted to outer axle shaft yoke assembly |
2 | |||
T59C | 140752 |
Washer, cork Fitted to outer axle shaft yoke assembly |
2 | |||
T60 | 140753 |
Boot, rubber |
2 |
£9.12 Ex VAT @ 20% |
||
T61 | 140606 |
Clip, gaiter, large |
2 | |||
T62 | 140607 |
Clip, gaiter, small |
2 | |||
T63 | 137478 |
Shaft, axle outer |
2 | |||
T64 | 107960 |
Bolt, Outer Axle shaft assembly to inner driving flangeRevington TR information: This bolt is used for other applications but primarily the propshaft. Also used in the axle. |
8 |
£4.25 Ex VAT @ 20% |
||
T65 | TN3209 |
Nut, nyloc Outer Axle shaft assembly to inner driving flange |
8 | |||
T66 | 137496 |
REAR HUB HOUSINGRevington TR information: This part is a bare hub bearing housing only. Consider also second hand part 137496SH. If you are looking for a complete hub assembly with the flange and central shaft with the universal joint yoke, these... READ MORE |
2 |
£204.70 Ex VAT @ 20% |
||
T67 | HN2008 |
Nut Securing hub housing and brake block plate to trailing arm |
12 | |||
T68 | WN0708 |
Washer, shakeproof Securing hub housing and brake block plate to trailing arm |
12 | |||
T69 | 138089 |
Seal, oil, inner |
2 | |||
T70 | 132066 |
Bearing, inner |
2 | |||
T71 | 138272 |
Spacer, collapsible, bearings |
2 |
£2.78 Ex VAT @ 20% |
||
T72 | 013599 |
Bearing, outer |
2 | |||
T73 | 138090 |
Seal, oil, outer |
2 | |||
T74 | 134584 |
Adjuster |
2 | |||
T75 | 137497 |
Stoneguard |
2 |
£8.71 Ex VAT @ 20% |
||
T76 | 138861 |
Nut, adjusting |
2 |
£16.08 Ex VAT @ 20% |
||
T77 | 139057 |
Washer, tab |
2 |
£5.09 Ex VAT @ 20% |
||
T78 | 134585 |
Nut, lock |
2 |
£9.55 Ex VAT @ 20% |
||
T79 | 210979 |
DRIVING FLANGE AND HUB ASSEMBLYTriumph Catalogue Remarks: For use with Disc Wheels only |
2 |
£172.48 Ex VAT @ 20% |
||
T80 | 132317 |
Stud, wheelTriumph Catalogue Remarks: For use with Disc Wheels only |
8 |
£6.11 Ex VAT @ 20% |
||
T80A | 212403 |
DRIVING FLANGE AND HUB ASSEMBLYTriumph Catalogue Remarks: For use with Wire Wheels only |
2 |
£273.07 Ex VAT @ 20% |
||
T80B | 142799 |
Stud, wheelTriumph Catalogue Remarks: For use with Wire Wheels only |
8 |
£7.43 Ex VAT @ 20% |
||
T80C | 202446 |
Hub, extension R H.Triumph Catalogue Remarks: For use with Wire Wheels only |
1 | |||
T80D | 202447 |
Hub, extension L H.Triumph Catalogue Remarks: For use with Wire Wheels only |
1 | |||
T80E | 110366 |
Nut, extension to hubTriumph Catalogue Remarks: For use with Wire Wheels only |
8 |
£2.66 Ex VAT @ 20% |
||
T81 | 134591 |
Key Driving flange to outer axle shaft |
2 |
£5.41 Ex VAT @ 20% |
||
T82 | WM0063 |
Washer, plain Driving flange to outer axle shaft |
2 |
£2.05 Ex VAT @ 20% |
||
T83 | 138563 |
Nut, nyloc Driving flange to outer axle shaft |
2 |
£21.46 Ex VAT @ 20% |