Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR4A Plate U - RIGID REAR AXLE.
<< Return to Triumph Catalogue Plate ListPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
U1AA | 514601 |
REAR AXLE ASSEMBLY (3.7 to 1 Ratio) (Less Half Shafts and Brake Units)Revington TR information: USE 514754 |
1 | |||
U1BB | 514754 |
REAR AXLE ASSEMBLY (3.7 to 1 Ratio) (Less Half Shafts and Brake Units)Triumph Catalogue Remarks: Reconditioned Unit |
1 |
£1053.06 Ex VAT @ 20% |
||
U1CC | 514602 |
REAR AXLE ASSEMBLY (4.1 to 1 Ratio) (Less Half Shafts and Brake Units)Revington TR information: USE 514755 |
1 | |||
U1DD | 514755 |
REAR AXLE ASSEMBLY (4.1 to 1 Ratio) (Less Half Shafts and Brake Units)Triumph Catalogue Remarks: Reconditioned Unit |
1 |
£1053.06 Ex VAT @ 20% |
||
U1 | 307147 |
AXLE CASING ASSEMBLY |
1 | |||
U2 | 125361 |
Nipple, grease, axle tube ends |
2 |
£2.11 Ex VAT @ 20% |
||
U3 | 013599 |
Screw, set Bearing cap to casing |
4 | |||
U4 | WL0209 |
Washer, lock Bearing cap to casingThis item has been superceded by WS106111243 - see below |
4 | |||
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
4 |
£0.37 Ex VAT @ 20% |
|||
U5 | 056894 |
Breather Fitted in housing |
1 | |||
U6 | 056895 |
Washer, fibre Fitted in housingThis item has been superceded by WF509 - see below |
1 | |||
WF509 |
FIBRE WASHER 3/8 |
1 |
£1.22 Ex VAT @ 20% |
|||
U6A | 113193 |
Bracket, compensator and boss sub assembly |
1 | |||
U6B | 125362 |
Nipple, grease, compensator bracketThis item has been superceded by RTR5079 - see below |
1 | |||
RTR5079 |
GREASE NIPPLE STRAIGHT 1/4 UNFRevington TR information: 1/4" UNF straight short |
1 |
£1.49 Ex VAT @ 20% |
|||
U7 | 058800 |
Seal, oil, axle tube endsThis item has been superceded by GHS185 - see below |
2 | |||
GHS185 |
SEAL OIL AXLE TUBE TR3G-4 |
2 |
£13.90 Ex VAT @ 20% |
|||
U8 | 110515 |
Bearing, between differential unit and casing |
2 |
£62.52 Ex VAT @ 20% |
||
U8A | 100894 |
Shim, bearing adjusting .003" |
£3.11 Ex VAT @ 20% |
|||
U9 | 100895 |
Shim, bearing adjusting .005"This item has been superceded by 100895/5 - see below |
as req'd | |||
100895/5 |
SHIM-DIFF PINION 0.005 |
as req'd |
£4.08 Ex VAT @ 20% |
|||
U9A | 100896 |
Shim, bearing adjusting .010"This item has been superceded by 100896/10 - see below |
||||
100896/10 |
SHIM-DIFF PINION 0.010 |
£1.39 Ex VAT @ 20% |
||||
DIFFERENTIAL UNIT ASSEMBLY |
||||||
U10 | 302155 |
Casing, differentialRevington TR information: TR3-6 Girling only diff Carrier which uses thick 153385 planet gears and accommodates TR3-4A Girling half shafts and TR5-6 independent side shafts. Not available new use Second Hand part 302155SH or complete carrier with second hand... READ MORE |
1 | |||
U11 | 113187 |
Gear, side, differentialThis item has been superceded by 153384 - see below |
2 | |||
153384 |
SIDE GEAR DIFF TR3G-6 16 TEETHRevington TR information: This part is not available new, please consider second hand part number 153384SH or complete differential carrier assemblies 302155X and 302155XSH |
2 |
£124.64 Ex VAT @ 20% |
|||
U12 | 102801 |
Washer, thrust, differential gear |
2 |
£4.22 Ex VAT @ 20% |
||
U13 | 113188 |
Gear, pinion, differentialThis item has been superceded by 153385 - see below |
2 | |||
153385 |
GEAR DIFF PLANET TR3-6Revington TR information: 10 tooth pinion gear 15.5mm thick. This part is not available new, please consider second hand part number 153385SH or complete differential carrier assemblies 302155X and 302155XSH. . All TR s from Girling TR3-TR6 use... READ MORE |
2 |
£113.32 Ex VAT @ 20% |
|||
U13A | 056793 |
Washer, thrust, differention gear .0465"/.0495'This item has been superceded by 139951 - see below |
||||
139951 |
Washer, thrust, differention gear .057"/.059"Revington TR information: Thrust washer 0.052" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£9.07 Ex VAT @ 20% |
||||
U13B | 139951 |
Washer, thrust, differention gear .057"/.059"Revington TR information: Thrust washer 0.052" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£9.07 Ex VAT @ 20% |
|||
U13C | 139952 |
Washer, thrust, differention gear .061"/.063"Revington TR information: Thrust Washer 0.056" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£8.70 Ex VAT @ 20% |
|||
U14 | 139953 |
Washer, thrust, differention gear .065"/.067"Revington TR information: Thrust Washer 0.060" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
2 |
£11.57 Ex VAT @ 20% |
||
U14A | 139954 |
Washer, thrust, differention gear .069"/.071'Revington TR information: Thrust Washer 0.064" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
as req'd |
£15.88 Ex VAT @ 20% |
||
U14B | 139955 |
Washer, thrust, differention gear .073"/.075"Revington TR information: Thrust Washer 0.068" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£7.60 Ex VAT @ 20% |
|||
U14C | 139956 |
Washer, thrust, differention gear .072"/.074"Revington TR information: Thrust Washer 0.072" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£7.60 Ex VAT @ 20% |
|||
U15 | 100844 |
Pin, cross, pinion gear |
1 |
£43.52 Ex VAT @ 20% |
||
U16 | 111215 |
Pin, locating, cross pin in differential casingRevington TR information: not available new, use second hand part 111215SH |
1 |
£9.07 Ex VAT @ 20% |
||
U17 | 109566 |
Button, thrust, on cross pinRevington TR information: Call for price and availability |
1 | |||
U18 | 502127 |
Crown wheel and pinion (3.7 to 1 ratio)Revington TR information: CWP 3.7:1 ratio TR2-4. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
1 pair |
£529.28 Ex VAT @ 20% |
||
U18 | 505014 |
Crown wheel and pinion (4.1 to 1 ratio)Revington TR information: CWP 4.1:1 ratio TR2-6. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
1 pair |
£403.88 Ex VAT @ 20% |
||
U19 | 110737 |
Bolt Crown wheel to differential casing |
10 |
£2.12 Ex VAT @ 20% |
||
U20 | 118977 |
Washer, lock Crown wheel to differential casingThis item has been superceded by WS106111243 - see below |
10 | |||
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
10 |
£0.37 Ex VAT @ 20% |
|||
U21 | 100897 |
Bearing, pinion headThis item has been superceded by 100897A - see below |
1 | |||
100897A |
DIFF BEARING PIN BIG TR2-4Revington TR information: The outer diameter is 72.6mm The bore size is 31.72mm Overall height 30.4mm |
1 |
£46.30 Ex VAT @ 20% |
|||
U21A | 100965 |
Shim, bearing adjustment .003"This item has been superceded by 100965/3 - see below |
||||
100965/3 |
SHIM PINION BEARING .003 |
|||||
U22 | 100966 |
Shim, bearing adjustment .005"This item has been superceded by 1009665 - see below |
as req'd | |||
1009665 |
SHIM BRG 0.005 |
as req'd |
£1.73 Ex VAT @ 20% |
|||
U22A | 100967 |
Shim, bearing adjustment .010" |
£1.72 Ex VAT @ 20% |
|||
U23 | 100846 |
Spacer, between bearings |
1 |
£19.32 Ex VAT @ 20% |
||
U24 | 100422 |
Bearing, pinion shank |
1 | |||
U24A | 100562 |
Shim, bearing adjustment .003"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375"... READ MORE |
£2.14 Ex VAT @ 20% |
|||
U25 | 100563 |
Shim, bearing adjustment .005"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375" external diameter. 140793... READ MORE |
as req'd |
£2.86 Ex VAT @ 20% |
||
U25A | 100564 |
Shim, bearing adjustment .010"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375" external diameter. 140793... READ MORE |
£1.84 Ex VAT @ 20% |
|||
U26 | 100898 |
Seal, oil, on pinionRevington TR information: Live Axle Pinion Oil Seal 2-4 and live axle TR4A The Original Triumph TR4A parts catalogue does not list the Axle Pinion Seal correctly in so far as seal 140337 is listed for both the independent... READ MORE |
1 |
£16.38 Ex VAT @ 20% |
||
U27 | 138105 |
Flange, pinionRevington TR information: Round Differential input flange, TR4A (both Live axle and IRS) to TR6 CP52867/CC61570. Consider original second hand part 138105SH. |
1 |
£84.07 Ex VAT @ 20% |
||
U28 | 112635 |
Nut, slotted, flange to pinionThis item has been superceded by NY610163 - see below |
1 | |||
NY610163 |
NUT NYLOC 5/8UNF x ½" TALL 1-1/8" AFRevington TR information: Nyloc Nut 5/8" UNF, ½" tall and 1-1/8" AF, grey protective coating. This is a special heavy duty nut which is actually Leyland original part number 159394 (TR7 4 speed axle). Our stock is original Leyland... READ MORE |
1 | ||||
U29 | 115990 |
Washer, under nutThis item has been superceded by WP11020164 - see below |
1 | |||
WP11020164 |
WASHER PLAIN 5/8" x 1-1/4" x 0.164"Revington TR information: WASHER PLAIN 5/8" X 1-1/4" X 0.164" Commonly used for TR4A-6 Differential Pinion attachment. Our stock is original Leyland part number 142333 |
1 |
£7.94 Ex VAT @ 20% |
|||
U30 | 013599 |
Pin, cotter, locking nut |
1 | |||
U31 | 203660 |
REAR COVER ASSEMBLYRevington TR information: This rear axle cover was fitted to Girling TR2-4 and live axle TR4A s and used small plug 114774. Not available new We also keep second hand part 203660SH as well as an aluminium finned part... READ MORE |
1 |
£77.35 Ex VAT @ 20% |
||
U32 | 101359 |
Washer, joint, between cover and casing |
1 |
£3.48 Ex VAT @ 20% |
||
U33 | 114774 |
Plug, oil fillerRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
U34 | HU0805 |
Screw, set, cover to casingThis item has been superceded by SH605051 - see below |
8 | |||
SH605051 |
SCREW 5/16 UNF X 5/8 INCH |
8 |
£1.39 Ex VAT @ 20% |
|||
U35 | WL0208 |
Washer, lockThis item has been superceded by WS105090853 - see below |
8 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
8 |
£0.25 Ex VAT @ 20% |
|||
U36 | 208390 |
REAR AXLE SHAFT AND COLLARTriumph Catalogue Remarks: Alternative to 207613 |
||||
U36 | 207613 |
REAR AXLE SHAFTTriumph Catalogue Remarks: Alternative to 208390 |
2 |
£271.40 Ex VAT @ 20% |
||
U37 | 110237 |
Bearing, rear hubThis item has been superceded by GHB166 - see below |
2 | |||
GHB166 |
RR AXLE HUB BRG TR3 4 |
2 |
£59.52 Ex VAT @ 20% |
|||
U38 | 058801 |
Seal, oilThis item has been superceded by GHS162 - see below |
2 | |||
GHS162 |
OIL SEAL TR3/4 RR HUB |
2 |
£11.89 Ex VAT @ 20% |
|||
U39 | 058773 |
Housing, bearingRevington TR information: Fitted to TR3 from TS13046 'Girling' axle, all TR4 and live axle TR4A. Not available new. Use second hand part 058773SH |
2 | |||
U39A | 036583 |
Shim, bearing housing adjustment .006" |
£3.34 Ex VAT @ 20% |
|||
U40 | 038264 |
Shim, bearing housing adjustment .008" |
as req'd |
£3.22 Ex VAT @ 20% |
||
U40A | 036582 |
Shim, bearing housing adjustment 1/64" |
£4.25 Ex VAT @ 20% |
|||
U40B | 036581 |
Shim, bearing housing adjustment 1/32" |
£6.22 Ex VAT @ 20% |
|||
U41 | 112653 |
Bolt Bearing housing and brake back plate to casing |
12 |
£3.06 Ex VAT @ 20% |
||
U42 | 036567 |
Washer, tab Bearing housing and brake back plate to casing |
6 |
£3.46 Ex VAT @ 20% |
||
U43 | 113175 |
Hub assemblyTriumph Catalogue Remarks: For use with Disc Wheels only |
2 |
£210.50 Ex VAT @ 20% |
||
U44 | 100869 |
Stud, wheel hubTriumph Catalogue Remarks: For use with Disc Wheels only |
8 |
£10.12 Ex VAT @ 20% |
||
U45 | 113173 |
Hub assemblyTriumph Catalogue Remarks: For use with Wire Wheels only |
2 | |||
113175 |
Hub assemblyRevington TR information: consider uprated part RTR1348 |
2 |
£210.50 Ex VAT @ 20% |
|||
U46 | 110365 |
Stud, rear hubTriumph Catalogue Remarks: For use with Wire Wheels only |
8 |
£13.90 Ex VAT @ 20% |
||
U47 | 202446 |
Extension, hub R.H.Triumph Catalogue Remarks: For use with Wire Wheels only |
1 | |||
217602 |
HUB ADAPTOR RH WIRE WHEELRevington TR information: consider second hand parts 217602SH and 217603SH |
1 | ||||
U47A | 202447 |
Extension, hub L.H.Triumph Catalogue Remarks: For use with Wire Wheels only |
1 | |||
217603 |
HUB ADAPTOR LH WIRE WHEEL TR3-6Revington TR information: consider second hand parts 217602SH and 217603SH |
1 |
£89.35 Ex VAT @ 20% |
|||
U48 | 110366 |
Nut, extension to hubTriumph Catalogue Remarks: For use with Wire Wheels only |
8 |
£2.66 Ex VAT @ 20% |
||
U49 | 110621 |
Key Hub to axle shaftThis item has been superceded by 134591 - see below |
2 | |||
134591 |
KEY FOR KEYWAY |
2 |
£5.41 Ex VAT @ 20% |
|||
U50 | 058784 |
Nut, slotted Hub to axle shaftThis item has been superceded by NC612201 - see below |
2 | |||
NC612201 |
NUT CASTLE 3/4UNFX5/8DEEP 1-1/4AF |
2 |
£5.89 Ex VAT @ 20% |
|||
U51 | WP0026 |
Washer, plain Hub to axle shaftThis item has been superceded by WC600121 - see below |
2 | |||
WC600121 |
WASHER 3/4 X 1-5/8 INCH OD |
2 |
£3.14 Ex VAT @ 20% |
|||
U52 | P00013 |
Pin, cotter Hub to axle shaft |
2 |