Suspension and steering
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR4A Plate V - INDEPENDENT REAR SUSPENSION.
<< Return to Triumph Catalogue Plate ListPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
![]() |
V1 | 307482 |
TRAILING ARM ASSEMBLY Complete R.H.Triumph Catalogue Remarks: originally with bushes but less studs |
1 | ||
![]() |
V1A | 307481 |
TRAILING ARM ASSEMBLY Complete L.H.Triumph Catalogue Remarks: originally with bushes but less studs |
1 | ||
![]() |
V2 | 138801 |
Plug, blanking, 7/8" dia. hole |
4 |
£5.00 Ex VAT @ 20% |
|
![]() |
V3 | 138532 |
Plug, blanking, 1 1/8" dia. Hole |
4 |
£1.62 Ex VAT @ 20% |
|
![]() |
V4 | TD0812 |
Stud, brake back plate and hub assembly attachment |
12 | ||
![]() |
V5 | 137599 |
Bush, fitted in armsRevington TR information: Superpro Polyurethane offer an improved kit please see SPF0077K below |
4 |
£12.62 Ex VAT @ 20% |
|
![]() |
V6 | 141399 |
Bracket, inner Trailing arm supportRevington TR information: There are 3 types of trailing arm brackets used on TR4A-IRS, 250, 5 and 6, they are identified with 1notch, 2 notches and 3 notches. The bracket arrangement was the same until part way through TR6... READ MORE |
2 |
£36.49 Ex VAT @ 20% |
|
![]() |
V7 | 141398 |
Bracket, outer Trailing arm supportRevington TR information: There are 3 types of trailing arm brackets used on TR4A-IRS, 250, 5 and 6, they are identified with 1notch, 2 notches and 3 notches. The bracket arrangement was the same until part way through TR6... READ MORE |
2 |
£36.49 Ex VAT @ 20% |
|
![]() |
V8 | HB1029 |
Bolt Trailing arms to inner and outer brackets |
4 | ||
![]() |
V9 | WM0803 |
Washer, plain Trailing arms to inner and outer brackets |
4 | ||
![]() |
V10 | TN3210 |
Nut, nyloc Trailing arms to inner and outer brackets |
4 | ||
![]() |
V11 | HB0926 |
Bolt Support brackets to chassis frame |
4 | ||
![]() |
V11A | 143677 |
Bolt Support brackets to chassis frame |
As req'd | ||
![]() |
V12 | WP0009 |
Washer, plain Support brackets to chassis frame |
8 | ||
![]() |
V13 | YN2909 |
Nut Support brackets to chassis frame |
8 | ||
![]() |
V14 | 139363 |
Shim Support brackets to chassis frameRevington TR information: Shim trailing arm mounting TR4A, 250, 5 and 6. Consider using second hand part 139363SH ans we have plenty of serviceable original parts or stainless steel part 139363SS. |
As req'd |
£2.36 Ex VAT @ 20% |
|
![]() |
V15 | 211658 |
REAR ROAD SPRING (Coil) "Short"Triumph Catalogue Remarks: Fitted up to Comm. No. |
2 | ||
![]() |
V15A | 213166 |
REAR ROAD SPRING (Coil) "Long"Triumph Catalogue Remarks: Fitted from Comm. No. - And future Note:-When replacement is required it is recommended that Spring No. 213166 be fitted in pairs |
2 | ||
![]() |
V16 | 138823 |
Insulator, rear spring UpperRevington TR information: Road spring Insulator rear TR4AIRS to 6. Consider SuperPro Polyurethane improved kit, which will last much longer than standard rubber and provide a quieter ride. A 5mm thicker insulator is available too, which can be used... READ MORE |
2 |
£5.76 Ex VAT @ 20% |
|
![]() |
V17 | 138824 |
Insulator, rear spring LowerRevington TR information: Road spring insulator cupped type rear TR4A-6 lower. This type of insulator was used inside the trailing arm on early cars and later, changed in production to the 'top hat' section type used at the top... READ MORE |
2 | ||
![]() |
V18 | 211937 |
REAR DAMPER R.H. |
1 | ||
![]() |
V18A | 211936 |
REAR DAMPER L.H. |
1 | ||
![]() |
V19 | HU1010 |
Screw, set Damper to mounting bracket |
4 | ||
![]() |
V20 | 508289 |
Washer, special Damper to mounting bracket |
4 |
£0.94 Ex VAT @ 20% |
|
![]() |
V21 | 141464 |
Link assembly, rear damper to trailing arm |
2 | ||
![]() |
V22 | HN2010 |
Nut Link to rear damper |
2 | ||
![]() |
V23 | WL0210 |
Washer Link to rear damper |
2 | ||
![]() |
V24 | 502335 |
Rubber, mounting Link to trailing arm |
4 |
£3.13 Ex VAT @ 20% |
|
![]() |
V25 | 140416 |
Washer, upper Link to trailing armRevington TR information: Flat washer 7/16" internal diameter, 1-5/8" external diameter, 0.164" thick Can use stainless steel washer WP107261572 or cupped washer TBC |
2 |
£1.55 Ex VAT @ 20% |
|
![]() |
V26 | 140479 |
Washer, lower Link to trailing armRevington TR information: Flat washer 3/8" internal diameter, 1-5/8" external diameter, 0.150" thick Can use stainless steel washer WP106261252 or cupped washer ACA5759 |
2 |
£1.38 Ex VAT @ 20% |
|
![]() |
V27 | HN2009 |
Nut Link to trailing arm |
2 | ||
![]() |
V28 | HN2109 |
Nut, lam Link to trailing arm |
2 | ||
![]() |
V29 | 140290 |
Rubber, bump, rear (fitted to floor)Revington TR information: IRS Bump stop fitted to TR4A only There are various bump and rebound stops used on IRS cars The following guide might be useful: - 140290: large bump stop fitted to TR4A body 136758: 1.626" tall. Rebound and... READ MORE |
2 |
£7.70 Ex VAT @ 20% |
|
![]() |
V30 | 136758 |
Rubber assembly, rebound (fitted to chassis frame)Revington TR information: 1.625" from back of plate to tip of bump stop rubber. There are various bump and rebound stops used on IRS cars The following guide might be useful: - 140290: large bump stop fitted to TR4A body 136758:... READ MORE |
2 |
£3.90 Ex VAT @ 20% |