Hardware, Oils and consumables
ROLL PINS
These are location devices, made from spring steel with a split up the length. When pushed into the correct size hole they grip tight to locate two components.
Revington TR's generic numbering system allows for easy identification of fastener products from their part number.
All roll pins are prefixed RPS
The first number indicates the units of measure as follows: 1= English 2 =MetricThe second and third numbers indicate the pin diameter in 1/64th of an inch or 0.1 mm.
The length is indicated by the 4th and 5th numbers in 1/8th of an inch or 1mm increments.
The last digit is reserved for variations.
8 results found.
< Back
| Part No. | Description and Comments | Price | Add to Cart | |
|---|---|---|---|---|
 |
RPS10805 |
ROLL PIN 1/8" X 5/8"Revington TR information: consider also Mills pin DS1312 |
£0.49 Ex VAT @ 20% |
|
|
RPS10806 |
Roll Pin 1/8" x 3/4" |
£0.79 Ex VAT @ 20% |
|
|
RPS11205 |
ROLL PIN 3/16" X 5/8" |
£0.42 Ex VAT @ 20% |
|
|
RPS1416 |
ROLL PIN |
£1.14 Ex VAT @ 20% |
|
|
RPS1418 |
ROLL PIN,DIFF X-PIN |
£0.43 Ex VAT @ 20% |
|
|
RPS116141 |
ROLL PIN SPRING TYPE 1/4 X 1-3/4" (6.35mm x 44.5) |
£0.95 Ex VAT @ 20% |
|
|
RPS120081 |
ROLLPIN 5/16 x 1inch |
£0.43 Ex VAT @ 20% |
|
|
RPS230331 |
PIN ROLL 4X33 MM |
£1.07 Ex VAT @ 20% |
8 results found.
