Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR5 Plate B - ENGINE: CYLINDER HEAD
<< Return to Triumph Catalogue Plate List
| Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
|---|---|---|---|---|---|---|
 |
B1AA | 516798 |
CYLINDER HEAD ASSEMBLY (8.6 to 1 Compression Ratio)Triumph Catalogue Remarks: (with valves and springs less studs) |
1 | ||
|
B1 | 516799 |
CYLINDER HEAD ASSEMBLY (8.6 to 1 Compression Ratio)Triumph Catalogue Remarks: (less valves, springs and studs) |
1 | ||
|
B2 | 058923 |
Guide, valve, inletRevington TR information: Standard steel inlet Valve Guide fitted to TR2-6 inclusive. Also used in the exhaust position on TR4 from CT27411 and all TR4A. Suitable for valves having a shaft diameter of 5/16" (7.94mm), the guide has an... READ MORE |
6 |
£1.84 Ex VAT @ 20% |
|
|
B3 | 111869 |
Guide, valve, exhaustRevington TR information: Standard steel exhaust Valve Guide fitted to TR250, 5 and 6. Suitable for valves having a shaft diameter of 5/16" (7.94mm), the guide has an outside diameter of 0.5025" (12.76mm). The guide is 2.25" long The... READ MORE |
6 |
£5.28 Ex VAT @ 20% |
|
|
B4 | 146497 |
Insert, valve seat Exhaust |
6 |
£9.31 Ex VAT @ 20% |
|
|
B5 | 146496 |
Insert, valve seat Inlet |
6 | ||
|
B6 | 144648 |
Plug, core, bucket type, rear face of head |
1 |
£2.29 Ex VAT @ 20% |
|
|
B7 | 144686 |
Plug, core, in rear face of head |
1 |
£3.71 Ex VAT @ 20% |
|
|
B8 | 101022 |
Screw, set Rocker oil feed |
1 | ||
|
B9 | 500469 |
Washer, copper Rocker oil feed |
1 |
£0.54 Ex VAT @ 20% |
|
|
B10 | 132495 |
Stud, rocker pedestal |
6 |
£2.88 Ex VAT @ 20% |
|
|
B11 | 105123 |
Stud, rocker cover |
3 |
£4.12 Ex VAT @ 20% |
|
|
B12 | HN2008 |
Nut, securing stud to cylinder head |
3 | ||
|
B13 | 148435 |
Adaptor, water valve to cylinder head, when heater is fittedRevington TR information: Straight adaptor, cylinder head to heater valve, This adaptor is 81mm long, When attempting to remove an old heater valve from this adaptor you often find the alloy valve body cracks and the remains stick inside... READ MORE |
1 |
£16.38 Ex VAT @ 20% |
|
|
B14 | 114774 |
Plug, replacing adaptor, when heater is not fittedRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
|
|
B15 | 213776 |
Gasket, cylinder head |
1 | ||
|
B16 | DS3113 |
Dowel, inlet manifold attachment |
3 | ||
|
B17 | 105124 |
Stud, exhaust manifold, outer |
4 |
£2.15 Ex VAT @ 20% |
|
|
B18 | 105125 |
Stud Inlet manifold attachment |
6 |
£2.88 Ex VAT @ 20% |
|
|
B18A | 101962 |
Stud Inlet manifold attachment |
3 | ||
|
B19 | 103810 |
Nut SecuringRevington TR information: TR250, 5 and 6 standard nut. 7/16"UNF 11/16" AF. For high compression engines use our deeper nut part number NP607162 |
14 |
£4.73 Ex VAT @ 20% |
|
|
B20 | 508289 |
Washer, plain cylinder head |
14 |
£0.94 Ex VAT @ 20% |
|
|
VALVES |
|||||
|
B21 | 146128 |
Valve, inletRevington TR information: head dia 36.51mm . RTR1129 is our stainless steel gas flowed version. |
6 |
£13.28 Ex VAT @ 20% |
|
|
B22 | 149658 |
Valve, exhaustRevington TR information: head dia 32mm. RTR1130 is the Stainless Steel gas flowed version. |
6 |
£17.04 Ex VAT @ 20% |
|
|
B22A | 102564 |
Spring, valve, innerRevington TR information: This valve spring is suitable for TR5 and TR6PI up to engine number CP54584 when used with an outer spring 149633 on all valves. Consider spring set RTR1175 |
12 |
£5.71 Ex VAT @ 20% |
|
|
B23 | 149633 |
Spring, valve, outerRevington TR information: This valve spring is suitable for TR5 and TR6PI up to engine number CP54584 when used with an inner spring 102564 on all valves. Consider spring set RTR1175 |
12 |
£3.84 Ex VAT @ 20% |
|
|
B24 | 149717 |
Collar, spring (lower)Revington TR information: TR5 and TR6PI Up to engine number CP54584. This collar is 4mm thick with an outside diameter of 19mm and supports the inner valve spring only. a thicker collar 157509 is also available. |
12 |
£2.60 Ex VAT @ 20% |
|
|
B25 | 111870 |
Collar, spring (upper), inlet valve onlyRevington TR information: These inlet valve spring upper collars (caps) were used on all versions of TR250, TR5-TR6. RTR prefer to supply second hand part 111870SH or aluminium version RTR1180 which are guaranteed to be dimensionaly correct. See part... READ MORE |
6 |
£5.17 Ex VAT @ 20% |
|
|
B26 | 128334 |
Collar, valve (top inner) Exhaust valve onlyRevington TR information: These exhaust valve spring upper inner collars (caps) were used on all versions of TR250, TR5 and TR6. These collars are not available new; use second hand part 128334SH or inlet version 111870 or aluminium... READ MORE |
6 | ||
|
B27 | 128335 |
Collar, valve (top outer) Exhaust valve onlyRevington TR information: These exhaust valve spring upper outer collars (caps) were used on all versions of TR250, TR5 and TR6. Consider second hand part 128335SH or inlet version 111870 or aluminium version RTR1180. See part number RTR1180 for... READ MORE |
6 |
£4.14 Ex VAT @ 20% |
|
|
B28 | 106663 |
Cotter (split cone)Revington TR information: There are two collet halves per valve. This part number is for two halves therfore 2 pieces are supplied and priced as 1 collet = 2 halves. Note - Some suppliers sell just 1 half. |
12 prs. |
£4.03 Ex VAT @ 20% |
|
|
B29 | 149513 |
PUSH RODRevington TR information: Standard TR5 CPTR6 push rod, 8.11" ( 206mm) long overall. NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression and a... READ MORE |
12 |
£9.83 Ex VAT @ 20% |
|
|
B30 | 143552 |
TAPPETRevington TR information: Consider using our improved cam follower RTR1298. |
12 |
£12.35 Ex VAT @ 20% |
|
|
B31 | 214559 |
ROCKER SHAFTRevington TR information: This Rocker Shaft is to the original equipment standard. Consider RTR1187 which is the tuftrided version used for our exchange rocker shaft. Remember to install a plug 137811 at either end of the rocker shaft before... READ MORE |
1 |
£35.98 Ex VAT @ 20% |
|
|
B32 | 145867 |
Pedestal, No. 1Revington TR information: The same aluminium rocker pedestals were used in all TR250, 5 and TR6 there being 3 types on one shaft. The number 1 end part number 145867, the intermediate, 2, 3, 4, and 5, part number... READ MORE |
1 |
£20.71 Ex VAT @ 20% |
|
|
B33 | 145868 |
Pedestal, intermediateRevington TR information: Not available new use second hand part 145868SH. The same aluminium rocker pedestals were used in all TR250, 5 and TR6 there being 3 types on one shaft. The number 1 end part number 145867, the... READ MORE |
4 | ||
|
B34 | 145869 |
Pedestal, No. 6Revington TR information: The same aluminium rocker pedestals were used in all TR250, 5 and TR6 there being 3 types on one shaft. The number 1 end part number 145867, the intermediate, 2, 3, 4, and 5, part number... READ MORE |
1 |
£30.60 Ex VAT @ 20% |
|
|
B35 | 104859 |
Screw, locating, shaft to drilled pedestal No. 6 |
1 |
£8.39 Ex VAT @ 20% |
|
|
B36 | HN2009 |
Nut Rocker pedestal to cylinder head |
6 | ||
|
B37 | WP009 |
Washer, plain Rocker pedestal to cylinder head |
6 | ||
|
B38 | 109023 |
Rocker, No. 1 |
6 |
£22.32 Ex VAT @ 20% |
|
|
B39 | 109024 |
Rocker, No. 2 |
6 |
£22.32 Ex VAT @ 20% |
|
|
B40 | 109495 |
Screw, adjustment Fitted in rockersRevington TR information: All TR2-6 use a similar rocker adjusting screw and nut principle. In fact all TR2-4A and TR5, TR6CP, CF and CR use the same screw 109495 and nut 057110 (now superceded to 51K1178). TR250 and TR6CC... READ MORE |
12 |
£7.02 Ex VAT @ 20% |
|
|
B41 | 057110 |
Locknut Fitted in rockers |
12 | ||
|
B42 | 105322 |
Spring, rocker, fitted to pedestals Nos. 1 and 6 |
2 | ||
|
B43 | 119313 |
Spring, rockerRevington TR information: Fitted to all 6 cylinder TR's |
5 |
£2.66 Ex VAT @ 20% |
|
|
B44 | WP8013 |
Washer, plain |
4 |
£0.91 Ex VAT @ 20% |
|
|
B45 | 137811 |
Plug, rocker shaft |
2 | ||
|
B46 | PC0010 |
Pin, cotter |
1 | ||
|
B47 | 213496 |
ROCKER COVER ASSEMBLYRevington TR information: Fitted to TR5 and TR250 and Carburettor TR6 up to Engine No. CC50,000 only Five different rocker covers were fitted to TR250, 5 and 6. The part numbers were:- 213496 Fitted up to Engine No. CC50,000... READ MORE |
1 | ||
|
B48 | 138176 |
Cap, oil filler |
1 |
£18.61 Ex VAT @ 20% |
|
|
B49 | 119322 |
Gasket, rocker cover |
1 | ||
|
B50 | TN3208 |
Nut, nyloc Rocker cover to cylinder head studs |
3 | ||
|
B51 | WP0008 |
Washer, plain Rocker cover to cylinder head studs |
3 | ||
|
B52 | WF0S08 |
Washer, fibre Rocker cover to cylinder head studs |
3 |
