Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR5 Plate L - CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER
<< Return to Triumph Catalogue Plate ListPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
![]() |
L1 | 515635 |
Cover and straps, sub assemblyRevington TR information: Not available. Use GCC228 |
1 | ||
![]() |
L2 | 517084 |
Spring, diaphragm |
1 | ||
![]() |
L3 | 515638 |
Ring, diaphragm spring fulcrum |
2 | ||
![]() |
L4 | 515634 |
Rivet, shouldered |
9 | ||
![]() |
L5 | Not serviced |
Plate, pressure |
1 | ||
![]() |
L6 | 515637 |
Clip, retaining diaphragm spring on pressure plate |
3 | ||
![]() |
L7 | 514735 |
Rivet, clip and strap to pressure plate |
3 | ||
![]() |
L7A | Not serviced |
Rivet, balance weight to cover |
|||
![]() |
L7B | Not serviced |
Weight, balance, clutch cover |
|||
![]() |
L8 | 148146 |
DRIVEN PLATE ASSEMBLYTriumph Catalogue Remarks: B & B clutch only |
1 | ||
![]() |
L8A | 517281 |
Facing, packageTriumph Catalogue Remarks: B & B clutch only |
1 | ||
![]() |
L8B | 214388 |
CLUTCH COVER ASSEMBLY-LAYCOCK |
1 | ||
![]() |
L9 | 517085 |
Spring, diaphragm |
I | ||
![]() |
L10 | 512343 |
Ring, retaining |
1 | ||
![]() |
L11 | 512344 |
Clip, spring, anti-rattle |
2 | ||
![]() |
L12 | Not serviced |
Cover, inner |
1 | ||
![]() |
L13 | Not serviced |
Cover, outer |
1 | ||
![]() |
L14 | Not serviced |
Plate, pressure |
1 | ||
![]() |
L15 | 148402 |
DRIVEN PLATE ASSEMBLYTriumph Catalogue Remarks: Laycock clutch only |
1 | ||
![]() |
L16 | DP0411 |
Dowel, locating clutch cover on flywheel |
3 | ||
![]() |
L17 | HU0856 |
Screw, set, clutch cover to flywheel |
6 | ||
![]() |
L18 | WL0208 |
Washer, lock, on set screw |
6 | ||
![]() |
L19 | 142465 |
CLUTCH THROW-OUT BEARING |
1 | ||
![]() |
L20 | 147858 |
Sleeve, clutch throw-outRevington TR information: RTR recommend 147858PB made from very high grade phosphor bronze, which has no small pin preventing rotation and as a result no grooves are made by the operating pins. The original TR4A part was made from... READ MORE |
1 |
£29.09 Ex VAT @ 20% |
|
![]() |
L20A | 148189 |
Bearing, needle roller |
1 | ||
![]() |
L21 | 106022 |
CLUTCH OPERATING FORKRevington TR information: The operating pins are included in this part number. If just the operating pins are required, these can be bought separately under part number 100164. Revington TR recommend drilling through this fork, through the shaft and... READ MORE |
1 |
£67.82 Ex VAT @ 20% |
|
![]() |
L22 | 100164 |
Pin, for fork |
2 |
£3.97 Ex VAT @ 20% |
|
![]() |
L23 | 056965 |
Pin, taper, fork to clutch shaft |
1 | ||
![]() |
L24 | 030047 |
Wire, locking taper pin |
1 | ||
![]() |
L25 | 136354 |
CLUTCH OPERATING SHAFT ASSEMBLYRevington TR information: Consider second hand part 136354SH. TR 2, 3, 4 and 4A use a slightly different shaft 108887. Use roll pin RPS230331 to securely pin the fork to the cross shaft at 90° and to one side... READ MORE |
1 |
£44.33 Ex VAT @ 20% |
|
![]() |
L25A | 144578 |
Spring, clutch shaft |
1 |
£6.68 Ex VAT @ 20% |
|
![]() |
L26 | Not serviced |
Body, slave cylinderTriumph Catalogue Remarks: use complete cylinder UKC8677 |
1 | ||
![]() |
L26A | UKC8677 |
Slave cylinder assemblyRevington TR information: Clutch slave cylinder TR250, 5 and 6. This part is 1" diameter. A repair kit is available part number GRK4007. GSY129 is a similar cylinder with a smaller bore.109746 is the TR2 part which can... READ MORE |
1 |
£43.90 Ex VAT @ 20% |
|
![]() |
L27 | 513954 |
Spring, return |
1 | ||
![]() |
L28 | 513952 |
Cup, filler |
1 | ||
![]() |
L29 | 513951 |
Piston, slave cylinder |
1 | ||
![]() |
L29A | 513953 |
Cup, spreader |
1 | ||
![]() |
L30 | 513390 |
Service kit |
1 | ||
![]() |
L31 | 501207 |
Screw, bleed |
1 |
£3.62 Ex VAT @ 20% |
|
![]() |
L31A | 513955 |
Boot |
1 | ||
![]() |
L32 | 138572 |
Rod, push, assemblyRevington TR information: Slave cylinder push rod non-adjustable, TR250, 5, 6 measuring 145mm (5.70") from the C/L of the clevis pin hole to the end. Consider our adjustable rod kit RTR1111K or second hand part 138572SH. |
1 |
£23.57 Ex VAT @ 20% |
|
![]() |
L33 | 136353 |
Bracket, mountingRevington TR information: Not available new, use Second Hand part 136353SH. |
1 | ||
![]() |
L34 | HB0813 |
Bolt Mounting bracket to gearbox and rear engine plate |
2 |
£0.46 Ex VAT @ 20% |
|
![]() |
L35 | HN2008 |
Nut Mounting bracket to gearbox and rear engine plate |
2 | ||
![]() |
L36 | WL0208 |
Washer, lock Mounting bracket to gearbox and rear engine plate |
2 | ||
![]() |
L37 | HB0809 |
Bolt Slave cylinder to mounting bracket |
2 | ||
![]() |
L38 | HN2008 |
Nut Slave cylinder to mounting bracket |
2 | ||
![]() |
L39 | WL0208 |
Washer, lock Slave cylinder to mounting bracket |
2 | ||
![]() |
L40 | PJ8808 |
Pin, clevis Slave cylinder push rod to clutch operating lever |
1 |
£1.96 Ex VAT @ 20% |
|
![]() |
L41 | WP0008 |
Washer, plain Slave cylinder push rod to clutch operating lever |
1 | ||
![]() |
L42 | P00009 |
Pin, cotter Slave cylinder push rod to clutch operating lever |
1 |