Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR6 CC Plate AE - INDEPENDENT REAR AXLE
<< Return to Triumph Catalogue Plate ListAlso in this listing
Rear Axle Center Assembly, Crown Wheel and Pinion Assembly, Inner Axle Shaft, Rear Axle Shaft and Hub Assembly, Outer Axle Shaft Assembly, Sleeve Yoke and Yoke Shaft Assembly, Drive Flange and Hub AssemblyPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
AE1AA | 312060 |
REAR AXLE CENTRE ASSEMBLY (3.7 : 1 Ratio)Triumph Catalogue Remarks: Fitted up to ............, Carburettor models only |
1 | |||
313129 |
REAR AXLE CENTRE ASSEMBLY (3.7 : 1 Ratio)Revington TR information: TR250, TR6CC and CF 3.7:1 ratio Centre Rear Axle Differential Unit. As new axle units are no longer available, please purchase our reconditioned unit detailed under part number 518116, or alternatively we have second hand units... READ MORE |
1 | ||||
AE1AB | 313129 |
REAR AXLE CENTRE ASSEMBLY (3.7 : 1 Ratio)Triumph Catalogue Remarks: Fitted from ............, Carburettor models only |
1 | |||
AE1AC | 518116 |
REAR AXLE CENTRE ASSEMBLY (3.7 : 1 Ratio) RECONDITIONED UNITTriumph Catalogue Remarks: Carburettor models only |
1 |
£1373.89 Ex VAT @ 20% |
||
AE1AD | 312061 |
REAR AXLE CENTRE ASSEMBLY (3.45 : 1 Ratio)Triumph Catalogue Remarks: Fitted up to ............, Petrol injection models only |
1 | |||
313130 |
REAR AXLE CENTRE ASSEMBLY (3.45 : 1 Ratio)Revington TR information: TR5, TR6CP and CR 3.45:1 ratio Centre Rear Axle Differential Unit. As new axle units are no longer available, please purchase our reconditioned unit detailed under part number 517393, or alternatively we have second hand units... READ MORE |
1 | ||||
AE1AE | 313130 |
REAR AXLE CENTRE ASSEMBLY (3.45 : 1 Ratio)Triumph Catalogue Remarks: Fitted from ............, Petrol injection models only |
1 | |||
AE1AF | 517393 |
REAR AXLE CENTRE ASSEMBLY (3.45 : 1 Ratio) RECONDITIONED UNITTriumph Catalogue Remarks: Petrol injection models only |
1 |
£1373.89 Ex VAT @ 20% |
||
AE1 | 149826 |
COVER assembly - RearRevington TR information: Not available new. Please ask for a price for a second hand part |
1 | |||
AE2 | 118826 |
PLUG, core, breather holeThis item has been superceded by 104449 - see below |
1 | |||
104449 |
CORE PLUG |
1 |
£1.90 Ex VAT @ 20% |
|||
AE3 | 510408 |
PIN, cotter, breatherThis item has been superceded by PS106121 - see below |
1 | |||
PS106121 |
SPLIT PIN 3/32 X 1-1/2 INCH |
1 |
£0.26 Ex VAT @ 20% |
|||
AE4 | 147783 |
RUBBER, mounting, assembly, controlled reboundTriumph Catalogue Remarks: On axle mounting bracket |
2 |
£26.40 Ex VAT @ 20% |
||
AE5 | HB081 |
BOLT-Mounting rubber to axle mounting bracket |
4 | |||
AE6 | TN3208 |
NUT, nyloc - Mounting rubber to axle mounting bracketThis item has been superceded by NY605111 - see below |
4 | |||
NY605111 |
NUT NYLOCK 5/16 UNF X 0.344" MEDIUM |
4 |
£0.38 Ex VAT @ 20% |
|||
AE7 | WM0058 |
WASHER - Mounting rubber to axle mounting bracketThis item has been superceded by WP10512075 - see below |
4 | |||
WP10512075 |
WASHER PLAIN 5/16" x 3/4" x 0.075" |
4 |
£0.40 Ex VAT @ 20% |
|||
AE8 | 211793 |
PLATE assembly, axle mountingRevington TR information: Consider second hand part 211793SH or reinforced second hand part 211793EX. |
1 |
£327.08 Ex VAT @ 20% |
||
AE9 | 140007 |
WASHER, distance, axle mounting plate |
1 | |||
AE10 | 132856 |
BOLT - Mounting plate to hypoid housing |
4 |
£10.80 Ex VAT @ 20% |
||
AE11 | WN0710 |
WASHER, shakeproof - Mounting plate to hypoid housingThis item has been superceded by WS107120301 - see below |
4 | |||
WS107120301 |
WASHER 7/16" STAR INT |
4 |
£0.19 Ex VAT @ 20% |
|||
AE12 | 305815 |
HOUSING assembly, hypoid |
1 | |||
AE13 | 140419 |
DOWEL, locating rear coverThis item has been superceded by DP508 - see below |
2 | |||
DP508 |
DOWEL |
2 |
£2.18 Ex VAT @ 20% |
|||
Not serviced |
CAP, bearing |
|||||
AE14 | 100878 |
SCREW, set - Bearing caps to hypoid housing |
4 | |||
AE15 | WL0209 |
WASHER, lock - Bearing caps to hypoid housingThis item has been superceded by WS106111243 - see below |
4 | |||
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
4 |
£0.37 Ex VAT @ 20% |
|||
AE16 | 114774 |
PLUG, oil levelRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
AE17 | 302155 |
CASE, differentialRevington TR information: TR3-6 Girling only diff Carrier which uses thick 153385 planet gears and accommodates TR3-4A Girling half shafts and TR5-6 independent side shafts. Not available new use Second Hand part 302155SH or complete carrier with second hand... READ MORE |
1 | |||
AE18 | 110515 |
BEARING, differential casing to hypoid housing |
2 |
£62.52 Ex VAT @ 20% |
||
AE19 | 100894 |
SHIM, adjusting differential bearing - .003" |
A/R |
£3.11 Ex VAT @ 20% |
||
AE19A | 100895 |
SHIM, adjusting differential bearing - .005"This item has been superceded by 100895/5 - see below |
A/R | |||
100895/5 |
SHIM-DIFF PINION 0.005 |
A/R |
£4.08 Ex VAT @ 20% |
|||
AE19B | 100896 |
SHIM, adjusting differential bearing - .010"This item has been superceded by 100896/10 - see below |
A/R | |||
100896/10 |
SHIM-DIFF PINION 0.010 |
A/R |
£1.39 Ex VAT @ 20% |
|||
AE20 | 516398 |
CROWN WHEEL AND PINION ASSEMBLY - 3.45 : 1 ratioTriumph Catalogue Remarks: Fitted up to …………, Petrol injection only |
1 |
£473.26 Ex VAT @ 20% |
||
AE20A | UKC0547 |
CROWN WHEEL AND PINION ASSEMBLY - 3.45 : 1 ratioTriumph Catalogue Remarks: Fitted from ............, Petrol injection only |
1 | |||
AE20B | 502127 |
CROWN WHEEL AND PINION ASSEMBLY - 3.7 : 1 ratioTriumph Catalogue Remarks: Fitted up to ............, Carburettor only |
1 |
£529.28 Ex VAT @ 20% |
||
AE20C | UKC0548 |
CROWN WHEEL AND PINION ASSEMBLY - 3.7 : 1 ratioTriumph Catalogue Remarks: Fitted from ............, Carburettor only |
1 | |||
502127 |
CROWN WHEEL AND PINION ASSEMBLY - 3.7 : 1 ratioRevington TR information: CWP 3.7:1 ratio TR2-4. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
1 |
£529.28 Ex VAT @ 20% |
|||
AE20D | 505014 |
CROWN WHEEL AND PINION ASSEMBLY - 4.1 : 1 ratioTriumph Catalogue Remarks: Alternative fitment for competition purposes |
1 |
£403.88 Ex VAT @ 20% |
||
AE20E | 503924 |
CROWN WHEEL AND PINION ASSEMBLY - 4.55 : 1 ratioTriumph Catalogue Remarks: Alternative fitment for competition purposes |
1 | |||
505013 |
CWP 4.55:1 TR2-6Revington TR information: TR2-6 Crown Wheel and Pinion set 4.55:1 ratio. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
1 |
£474.31 Ex VAT @ 20% |
|||
AE20F | 502523 |
CROWN WHEEL AND PINION ASSEMBLY - 4.3 : 1 ratioTriumph Catalogue Remarks: Alternative fitment for competition purposes |
1 |
£471.30 Ex VAT @ 20% |
||
AE20G | 515709 |
CROWN WHEEL AND PINION ASSEMBLY - 4.875 : 1 ratioTriumph Catalogue Remarks: Alternative fitment for competition purposes |
1 | |||
AE21 | 110737 |
BOLT - Crown wheel to differential case |
10 |
£2.12 Ex VAT @ 20% |
||
AE22 | 118977 |
WASHER, lock - Crown wheel to differential caseThis item has been superceded by WS106111243 - see below |
10 | |||
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
10 |
£0.37 Ex VAT @ 20% |
|||
AE22A | 144254 |
LOCTITE - For use with crown wheel bolts |
A/R | |||
AE22B | 144255 |
LOCTITE retaining compound - Crown wheel bolts |
A/R | |||
AE22C | 144259 |
LOCQUIC PRIMERT - For use with crown wheel bolts |
A/R | |||
AE23 | 113187 |
GEAR, side differential - 16 teethTriumph Catalogue Remarks: If fitted in pairs Alt. to 153384 |
2 | |||
153384 |
GEAR, side differential - 16 teethRevington TR information: This part is not available new, please consider second hand part number 153384SH or complete differential carrier assemblies 302155X and 302155XSH |
2 |
£124.64 Ex VAT @ 20% |
|||
3A | 153384 |
GEAR, side differential - 16 teethTriumph Catalogue Remarks: If fitted in pairs Alt. to 113187 |
2 |
£124.64 Ex VAT @ 20% |
||
AE24 | 102801 |
WASHER, thrust, differential side gear |
2 |
£4.22 Ex VAT @ 20% |
||
AE25 | 113188 |
PINION, differential - 10 teethTriumph Catalogue Remarks: If fitted in pairs Alt to 153385 |
2 | |||
153385 |
PINION, differential - 10 teethRevington TR information: 10 tooth pinion gear 15.5mm thick. This part is not available new, please consider second hand part number 153385SH or complete differential carrier assemblies 302155X and 302155XSH. . All TR s from Girling TR3-TR6 use... READ MORE |
2 |
£113.32 Ex VAT @ 20% |
|||
AE25A | 153385 |
PINION, differential - 10 teethTriumph Catalogue Remarks: If fitted in pairs Alt to 113188 |
2 |
£113.32 Ex VAT @ 20% |
||
AE26 | 056793 |
WASHER, thrust, differential pinion .465"/.495"This item has been superceded by 139951 - see below |
A/R | |||
139951 |
WASHER, thrust, differential pinion .057"/.059"Revington TR information: Thrust washer 0.052" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
A/R |
£9.07 Ex VAT @ 20% |
|||
AE26A | 139951 |
WASHER, thrust, differential pinion .057"/.059"Revington TR information: Thrust washer 0.052" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
A/R |
£9.07 Ex VAT @ 20% |
||
AE26B | 139953 |
WASHER, thrust, differential pinion .065"/.067"Revington TR information: Thrust Washer 0.060" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
A/R |
£11.57 Ex VAT @ 20% |
||
AE26C | 139954 |
WASHER, thrust, differential pinion .069"/.071"Revington TR information: Thrust Washer 0.064" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
A/R |
£15.88 Ex VAT @ 20% |
||
AE26D | 139955 |
WASHER, thrust, differential pinion .073"/.075"Revington TR information: Thrust Washer 0.068" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
AIR |
£7.60 Ex VAT @ 20% |
||
AE26E | 139956 |
WASHER, thrust, differential pinion .077 "/.079"Revington TR information: Thrust Washer 0.072" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
A/R |
£7.60 Ex VAT @ 20% |
||
AE26F | 160373 |
WASHER, thrust, differential pinion .057 "/.059"Triumph Catalogue Remarks: Fitted from ............ |
A/R | |||
139953 |
WASHER, thrust, differential pinion .065"/.067"Revington TR information: Thrust Washer 0.060" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
A/R |
£11.57 Ex VAT @ 20% |
|||
AE26G | 160374 |
WASHER, thrust, differential pinion .061 "/.063"Triumph Catalogue Remarks: Fitted from ............ |
A/R | |||
139954 |
WASHER, thrust, differential pinion .069"/.071"Revington TR information: Thrust Washer 0.064" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
A/R |
£15.88 Ex VAT @ 20% |
|||
AE26H | 160375 |
WASHER, thrust, differential pinion .065 "/.067"Triumph Catalogue Remarks: Fitted from ............ |
A/R |
£7.01 Ex VAT @ 20% |
||
AE26I | 160376 |
WASHER, thrust, differential pinion .069 "/.071"Triumph Catalogue Remarks: Fitted from ............ |
A/R | |||
139956 |
WASHER, thrust, differential pinion .077 "/.079"Revington TR information: Thrust Washer 0.072" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
A/R |
£7.60 Ex VAT @ 20% |
|||
AE27 | 100844 |
PIN, cross, differential |
1 |
£43.52 Ex VAT @ 20% |
||
AE28 | 111215 |
PIN, locating cross pin in differential casingRevington TR information: not available new, use second hand part 111215SH |
1 |
£9.07 Ex VAT @ 20% |
||
AE29 | 100897 |
BEARING, taper roller, pinion headThis item has been superceded by 100897A - see below |
1 | |||
100897A |
DIFF BEARING PIN BIG TR2-4Revington TR information: The outer diameter is 72.6mm The bore size is 31.72mm Overall height 30.4mm |
1 |
£46.30 Ex VAT @ 20% |
|||
AE30 | 100965 |
SHIM, adjusting pinion head bearing - .003"This item has been superceded by 100965/3 - see below |
A/R | |||
100965/3 |
SHIM PINION BEARING .003 |
A/R | ||||
AE30A | 100966 |
SHIM, adjusting pinion head bearing - .005"This item has been superceded by 1009665 - see below |
A/R | |||
1009665 |
SHIM BRG 0.005 |
A/R |
£1.73 Ex VAT @ 20% |
|||
AE30B | 100967 |
SHIM, adjusting pinion head bearing - .010" |
A/R |
£1.72 Ex VAT @ 20% |
||
AE31 | 100846 |
SPACER, between bearings |
1 |
£19.32 Ex VAT @ 20% |
||
AE32 | 100422 |
BEARING, roller,, pinion shank |
1 | |||
AE33 | 100562 |
SHIM, adjusting pinion shank bearing - .003"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375"... READ MORE |
A/R |
£2.14 Ex VAT @ 20% |
||
AE33A | 100563 |
SHIM, adjusting pinion shank bearing - .005"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375" external diameter. 140793... READ MORE |
A/R |
£2.86 Ex VAT @ 20% |
||
AE33B | 100564 |
SHIM, adjusting pinion shank bearing - .010"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375" external diameter. 140793... READ MORE |
A/R |
£1.84 Ex VAT @ 20% |
||
AE34 | 140337 |
SEAL, oil, pinionRevington TR information: TR4A-6. Independent axle nose seal. Not shown in late TR6 parts book. The Original Triumph TR4A parts catalogue does not list the Axle Pinion Seal correctly in so far as seal 140337 is listed for both... READ MORE |
1 |
£12.88 Ex VAT @ 20% |
||
AE35 | 138105 |
FLANGE, pinionTriumph Catalogue Remarks: Fitted up to ………… |
1 |
£84.07 Ex VAT @ 20% |
||
AE35A | 160275 |
FLANGE, pinionTriumph Catalogue Remarks: Fitted from ............ |
1 |
£128.24 Ex VAT @ 20% |
||
AE36 | 115990 |
WASHER - Flange to pinionTriumph Catalogue Remarks: Fitted up to ………… |
1 | |||
WP11020164 |
WASHER PLAIN 5/8" x 1-1/4" x 0.164"Revington TR information: WASHER PLAIN 5/8" X 1-1/4" X 0.164" Commonly used for TR4A-6 Differential Pinion attachment. Our stock is original Leyland part number 142333 |
1 |
£7.94 Ex VAT @ 20% |
|||
AE36A | 142333 |
WASHER - Flange to pinionTriumph Catalogue Remarks: Fitted from ............ |
1 | |||
WP11020164 |
WASHER PLAIN 5/8" x 1-1/4" x 0.164"Revington TR information: WASHER PLAIN 5/8" X 1-1/4" X 0.164" Commonly used for TR4A-6 Differential Pinion attachment. Our stock is original Leyland part number 142333 |
1 |
£7.94 Ex VAT @ 20% |
|||
AE37 | 112635 |
NUT, slotted - Flange to pinionThis item has been superceded by NY610163 - see below |
1 | |||
NY610163 |
NUT NYLOC 5/8UNF x ½" TALL 1-1/8" AFRevington TR information: Nyloc Nut 5/8" UNF, ½" tall and 1-1/8" AF, grey protective coating. This is a special heavy duty nut which is actually Leyland original part number 159394 (TR7 4 speed axle). Our stock is original Leyland... READ MORE |
1 | ||||
AE38 | 514773 |
WIRE, soft iron, 14G x 4" - Flange to pinionThis item has been superceded by EAW4321 - see below |
A/R | |||
EAW4321 |
WIRE TIE |
A/R |
£0.58 Ex VAT @ 20% |
|||
AE38A | 159394 |
NUT, pinion flangeTriumph Catalogue Remarks: Fitted from ............ |
1 | |||
NY610163 |
NUT NYLOC 5/8UNF x ½" TALL 1-1/8" AFRevington TR information: Nyloc Nut 5/8" UNF, ½" tall and 1-1/8" AF, grey protective coating. This is a special heavy duty nut which is actually Leyland original part number 159394 (TR7 4 speed axle). Our stock is original Leyland... READ MORE |
1 | ||||
AE38B | UKC0725 |
SHIELD, pinion nutTriumph Catalogue Remarks: Fitted from ............ |
1 | |||
AE39 | 134480 |
WASHER, joint- Hypoid housing to rear cover |
1 |
£2.23 Ex VAT @ 20% |
||
AE40 | HU0808 |
SCREW, set - Hypoid housing to rear coverThis item has been superceded by SH605081 - see below |
8 | |||
SH605081 |
SCREW 5/16 UNF X 1 INCH |
8 |
£0.79 Ex VAT @ 20% |
|||
AE41 | WL0208 |
WASHER, lock - Hypoid housing to rear coverThis item has been superceded by WS105090853 - see below |
8 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
8 |
£0.25 Ex VAT @ 20% |
|||
AE42 | 134235 |
MOUNTING, rubber - Upper, frontRevington TR information: These bushes are very soft and can allow too much axle movement. We recommend using the following Superpro polyurethane bush kits: - SPF0138AVK TR4A IRS: Road use. SPF0138AK TR4A IRS: Fast Road and Rally use. SPF0138A-90K... READ MORE |
2 |
£4.75 Ex VAT @ 20% |
||
AE43 | 134236 |
MOUNTING, rubber - Lower, frontRevington TR information: These bushes are very soft and can allow too much axle movement. We recommend using the following Superpro polyurethane bush kits: - SPF0138AVK TR4A IRS: Road use. SPF0138AK TR4A IRS: Fast Road and Rally use. SPF0138A-90K... READ MORE |
2 |
£3.48 Ex VAT @ 20% |
||
AE44 | 134234 |
WASHER, special - Rear axle centreThis item has been superceded by WP106381571 - see below |
4 | |||
WP106381571 |
WASHER DIFF MOUNT 3/8" X 2-3/8" X 0.157"Revington TR information: Revington TR recommend using Stainless Steel Washer WP106381572 |
4 |
£3.46 Ex VAT @ 20% |
|||
AE45 | TN3209 |
NUT, nyloc - Rear axle centreThis item has been superceded by NY606121 - see below |
4 | |||
NY606121 |
NUT NYLOC HALF 3/8UNF X 3/8" THINRevington TR information: For propshaft and driveshaft applications or where heat might be an issue for nyloc nuts we recommend a stiff nut which is all metal and has a deformed thread to lock it in place. This nut... READ MORE |
4 |
£1.44 Ex VAT @ 20% |
|||
AE46 | 149379 |
INNER AXLE SHAFT - R.H.Revington TR information: RH Axle Shaft for TR4A-6 differentials. This is the short shaft 157mm long including the thread. Not available new. Use second hand part 149379SH. |
1 | |||
AE47 | 149378 |
INNER AXLE SHAFT - L.H.Revington TR information: LH Axle Shaft for TR4A-6 differentials. This is the long shaft, 178mm long including the thread. Whilst we have new parts available we also keep second hand part 149378SH. |
1 | |||
AE48 | 134465 |
BEARING, ball, axle shaft |
2 |
£26.95 Ex VAT @ 20% |
||
AE49 | 128638 |
HOUSING, oil seal |
2 |
£26.92 Ex VAT @ 20% |
||
AE50 | HU0806 |
SCREW, set - Housing to hypoid housingThis item has been superceded by SH605061 - see below |
8 | |||
SH605061 |
SCREW 5/16 UNF X 3/4 INCH |
8 |
£0.54 Ex VAT @ 20% |
|||
AE51 | WL0208 |
WASHER, lock - Housing to hypoid housingThis item has been superceded by WS105090853 - see below |
8 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
8 |
£0.25 Ex VAT @ 20% |
|||
AE52 | 138523 |
SEAL, oil |
2 |
£6.49 Ex VAT @ 20% |
||
AE53 | 149409 |
FLANGE assembly, driving, innerRevington TR information: Drive Flange differential TR5-6. This drive flange whilst available new, is also available second hand. Be aware that this part is not the same as the earlier flange 138726 as the keyway is wider on the... READ MORE |
2 |
£74.87 Ex VAT @ 20% |
||
AE54 | 134450 |
STONEGUARD |
2 | |||
AE55 | 143280 |
KEY - Inner driving flange to inner axle shaft |
2 |
£14.59 Ex VAT @ 20% |
||
AE56 | 139043 |
WASHER, plain - Inner driving flange to inner axle shaftThis item has been superceded by WP11020164 - see below |
2 | |||
WP11020164 |
WASHER PLAIN 5/8" x 1-1/4" x 0.164"Revington TR information: WASHER PLAIN 5/8" X 1-1/4" X 0.164" Commonly used for TR4A-6 Differential Pinion attachment. Our stock is original Leyland part number 142333 |
2 |
£7.94 Ex VAT @ 20% |
|||
AE57 | 138563 |
NUT, nyloc - Inner driving flange to inner axle shaftThis item has been superceded by NY610243 - see below |
2 | |||
NY610243 |
NUT NYLOC 5/8UNF x ¾" TALL 1-1/8" AFRevington TR information: Nut 5/8" UNF ¾" tall and 1-1/8" AF. This nut is horrendously expensive; it was originally part number 138563 used on TR4A-6 differential Axle Shafts. See 'MORE' for a list of other special duty nuts for... READ MORE |
2 |
£21.72 Ex VAT @ 20% |
|||
AE57A | 402347 |
REAR OUTER AXLE SHAFT AND HUB ASSEMBLY (comprising items AE58 to AE86 inclusive)This item has been superceded by 137496NEW - see below |
2 | |||
137496NEW |
REAR HUB ASSY. TR4A-6 NEWRevington TR information: TR4A-6 new-build standard rear Hub assembly. This unit is not currently available, consider rebuilt original part 137496EX or uprated version 137496-1. Whist the standard hub unit to the standard specification is not available, we... READ MORE |
2 |
£303.92 Ex VAT @ 20% |
|||
AE57B | 212293 |
OUTER AXLE SHAFT ASSEMBLY (comprising items AE58 to AE67 inclusive)Revington TR information: Triumph sold the TR4A drive shafts as a complete assembly including all parts from the hub to the flange connected to the differential unit. Today we sell the drive shafts separately from the hub. See Drive... READ MORE |
||||
AE57C | 145085 |
SLEEVE YOKE AND YOKE SHAFT ASSEMBLY (comprising items AE60, AE64, AE65, AE66 and AE 67 ) |
2 | |||
AE58 | 137478 |
SHAFT, axle outerThis item has been superceded by UKC643 - see below |
2 | |||
UKC643 |
SHAFT AXLE OUTER TR4A-6 |
2 |
£165.24 Ex VAT @ 20% |
|||
AE59 | 211137 |
FLANGE, yokeRevington TR information: TR4A-6 drive flange for standard drive shafts. |
2 |
£110.80 Ex VAT @ 20% |
||
AE60 | 140749 |
JOINT, slip, assembly |
2 | |||
AE61 | 213844 |
BOOT, P.V.C., inner axle shaftRevington TR information: Consider original second hand part number 213844SH. . |
2 |
£12.58 Ex VAT @ 20% |
||
AE62 | 144859 |
JOINT, universal - Flange end and hub endTriumph Catalogue Remarks: Alternative to 155201 |
4 | |||
GUJ116HD |
UNIVERSAL JOINT HEAVY DUTY TR2/6Revington TR information: Heavy duty greasable Universal Joint (UJ) which is a direct replacement for the standard TR2-6 UJ. This UJ has stronger, larger diameter and longer rollers, the caps are longer on inboard end to accommodate the longer... READ MORE |
4 |
£48.19 Ex VAT @ 20% |
|||
AE62A | 155201 |
JOINT, universal - Flange end and hub endTriumph Catalogue Remarks: Alternative to 144859 |
4 | |||
GUJ116HD |
UNIVERSAL JOINT HEAVY DUTY TR2/6Revington TR information: Heavy duty greasable Universal Joint (UJ) which is a direct replacement for the standard TR2-6 UJ. This UJ has stronger, larger diameter and longer rollers, the caps are longer on inboard end to accommodate the longer... READ MORE |
4 |
£48.19 Ex VAT @ 20% |
|||
AE63 | 144825 |
NIPPLE, greaseThis item has been superceded by 7H3858 - see below |
4 | |||
7H3858 |
NIPPLE GREASE 1/4UNF X 29mm LONGRevington TR information: 1/4" UNF straight 29mm long O/A |
4 |
£3.46 Ex VAT @ 20% |
|||
AE64 | 142437 |
SHAFT, sliding halfRevington TR information: No longer available in this form as a standard part. TR's 4A IRS, 250, 5 and 6 can exhibit a tendency for the rear end to do a single twitch, both left and right, on the... READ MORE |
2 |
£134.88 Ex VAT @ 20% |
||
AE64A | 213844 |
BOOT, P.V.C.Revington TR information: Consider original second hand part number 213844SH. . |
2 |
£12.58 Ex VAT @ 20% |
||
AE65 | 140753 |
BOOT, rubber |
2 |
£9.12 Ex VAT @ 20% |
||
AE66 | 140606 |
CLIP, boot - LargeThis item has been superceded by EAW4321 - see below |
2 | |||
EAW4321 |
WIRE TIE |
2 |
£0.58 Ex VAT @ 20% |
|||
AE67 | 140607 |
CLIP, boot - Small |
2 | |||
AE68 | 107960 |
BOLT - Outer axle shaft assembly to inner driving flangeRevington TR information: This bolt is used for other applications but primarily the propshaft. Also used in the axle. |
8 |
£4.25 Ex VAT @ 20% |
||
AE69 | TN3209 |
NUT, nyloc - Outer axle shaft assembly to inner driving flangeThis item has been superceded by NY606121 - see below |
||||
NY606121 |
NUT NYLOC HALF 3/8UNF X 3/8" THINRevington TR information: For propshaft and driveshaft applications or where heat might be an issue for nyloc nuts we recommend a stiff nut which is all metal and has a deformed thread to lock it in place. This nut... READ MORE |
£1.44 Ex VAT @ 20% |
||||
AE70 | 137496 |
REAR hub housingRevington TR information: This part is a bare hub bearing housing only. Consider also second hand part 137496SH. If you are looking for a complete hub assembly with the flange and central shaft with the universal joint yoke, these... READ MORE |
2 |
£204.70 Ex VAT @ 20% |
||
AE71 | YN2908 |
NUT, nyloc, hub housing and brake block plate to trailing armThis item has been superceded by NY605141 - see below |
12 | |||
NY605141 |
NYLOC 5/16 UNF X 7/16 THICKRevington TR information: Nyloc Nut tall version. This Nyloc nut is used in locations where extra thread depth is desirable. |
12 | ||||
AE72 | 138089 |
SEAL, oil, innerThis item has been superceded by GHS131 - see below |
2 | |||
GHS131 |
SEAL INNER REAR HUB TR6 small |
2 |
£5.62 Ex VAT @ 20% |
|||
AE73 | 132066 |
BEARING, innerThis item has been superceded by GHB101 - see below |
2 | |||
GHB101 |
BEARING REAR HUB TR4A/6Revington TR information: Also fits GT6 and Dolomite inner front hub |
2 |
£19.01 Ex VAT @ 20% |
|||
AE74 | 138272 |
SPACER, collapsible, bearings |
2 | |||
AE75 | 134589 |
BEARING, outerThis item has been superceded by GHB265 - see below |
2 | |||
GHB265 |
REAR TR6 BEARING |
2 |
£30.53 Ex VAT @ 20% |
|||
AE76 | 138090 |
SEAL, oil, outerThis item has been superceded by GHS133 - see below |
2 | |||
GHS133 |
SEAL REAR HUB OUTER TR4A-6 large |
2 |
£9.59 Ex VAT @ 20% |
|||
AE77 | 134584 |
ADJUSTERThis item has been superceded by ULC2188 - see below |
2 | |||
ULC2188 |
ADJUSTER |
2 |
£27.02 Ex VAT @ 20% |
|||
AE78 | 137497 |
STONEGUARD |
2 |
£8.71 Ex VAT @ 20% |
||
AE79 | 138861 |
NUT, adjusting |
2 |
£16.08 Ex VAT @ 20% |
||
AE80 | 134585 |
NUT, lock |
2 |
£9.55 Ex VAT @ 20% |
||
AE81 | 139057 |
WASHER, tab |
2 |
£5.09 Ex VAT @ 20% |
||
AE82 | 210979 |
DRIVING FLANGE AND HUB ASSEMBLYTriumph Catalogue Remarks: Disc wheels only |
2 |
£172.48 Ex VAT @ 20% |
||
AE83 | 132317 |
STUD, wheelTriumph Catalogue Remarks: Disc wheels only |
8 |
£6.11 Ex VAT @ 20% |
||
AE83A | 212403 |
DRIVING FLANGE AND HUB ASSEMBLYTriumph Catalogue Remarks: Wire wheels only |
2 |
£273.07 Ex VAT @ 20% |
||
AE83B | 142799 |
STUD, wheelTriumph Catalogue Remarks: Wire wheels only |
8 |
£7.43 Ex VAT @ 20% |
||
AE83C | 202446 |
EXTENSION, hub - R.H.Triumph Catalogue Remarks: Wire wheels only, fitted up to comm. No. ............ |
1 | |||
217602 |
EXTENSION, hub - R.H.Revington TR information: consider second hand parts 217602SH and 217603SH |
1 | ||||
AE83D | 202447 |
EXTENSION, hub - L.H.Triumph Catalogue Remarks: Wire wheels only, fitted up to comm. No. ............ |
1 | |||
217603 |
HUB ADAPTOR LH WIRE WHEEL TR3-6Revington TR information: consider second hand parts 217602SH and 217603SH |
1 |
£89.35 Ex VAT @ 20% |
|||
AE83E | 217602 |
EXTENSION, hub - R.H.Triumph Catalogue Remarks: Wire wheels only, fitted from comm. No. ............ |
1 | |||
AE83F | 217602 |
EXTENSION, hub - L.H.Triumph Catalogue Remarks: Wire wheels only, fitted from comm. No. ............ |
1 | |||
AE83G | 110366 |
NUT, extension to hubTriumph Catalogue Remarks: Wire wheels only |
8 |
£2.66 Ex VAT @ 20% |
||
AE84 | 134591 |
KEY, driving flange - Driving flange to outer axle shaft |
2 |
£5.41 Ex VAT @ 20% |
||
AE85 | WM0063 |
WASHER, plain - Driving flange to outer axle shaft |
2 |
£2.05 Ex VAT @ 20% |
||
AE85A | 139057 |
WASHER, tab - Driving flange to outer axle shaft |
2 |
£5.09 Ex VAT @ 20% |
||
AE86 | 138563 |
NUT, nyloc - Driving flange to outer axle shaftThis item has been superceded by NY610243 - see below |
2 | |||
NY610243 |
NUT NYLOC 5/8UNF x ¾" TALL 1-1/8" AFRevington TR information: Nut 5/8" UNF ¾" tall and 1-1/8" AF. This nut is horrendously expensive; it was originally part number 138563 used on TR4A-6 differential Axle Shafts. See 'MORE' for a list of other special duty nuts for... READ MORE |
2 |
£21.72 Ex VAT @ 20% |
Also in this listing
Rear Axle Center Assembly, Crown Wheel and Pinion Assembly, Inner Axle Shaft, Rear Axle Shaft and Hub Assembly, Outer Axle Shaft Assembly, Sleeve Yoke and Yoke Shaft Assembly, Drive Flange and Hub Assembly